THASN276TMR5-S - Washing machine HAIER - Free user manual and instructions

Find the device manual for free THASN276TMR5-S HAIER in PDF.

HAIER THASN276TMR5-S - Washing machine
📄 180 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice HAIER THASN276TMR5-S - page 19
Pick your language and provide your email: we'll send you a specifically translated version.
Product typeFront-load washing machine
BrandHaier
ModelTHASN276TMR5-S
Washing capacity8 kg
Maximum spin speed1400 rpm
Energy classA (or A+++ depending on standard)
Water consumption per cycle50 L
Energy consumption per cycle0.8 kWh
Noise level (wash/spin)52 dB / 76 dB
Dimensions (H x W x D)85 x 60 x 57 cm
Net weight70 kg
Power supply220-240 V, 50 Hz, 10 A
Motor typeInverter motor
Main functionsDelayed start, quick wash, prewash, anti-allergy, steam
Wash programsCotton, synthetic, delicate, wool, sport, hygiene, quick 15 min
OptionsRinse hold, extra rinse, temperature selection, variable spin
Safety systemChild lock, automatic shut-off in case of leak, imbalance
Maintenance and cleaningCleaning of door seal, lint filter, drum (cleaning cycle)
Common spare partsFilter, belt, hinges, door seal, drain pump
Repairability index8.2 / 10
Manufacturer warranty2 years

Frequently Asked Questions - THASN276TMR5-S HAIER

How to install the Haier THASN276TMR5-S washing machine?
Remove the transit bolts, connect the inlet and drain hoses, plug in the power cord, then level the appliance by adjusting the feet. Consult the installation manual for more details.
How to clean the lint filter?
Open the flap at the bottom right, turn the filter counterclockwise, clean it under running water, then put it back. Make sure it is properly engaged.
What to do if the washing machine does not drain?
Check that the drain hose is not clogged or kinked. Clean the lint filter and the pump filter. If the problem persists, contact customer service.
Which programs to use for delicate clothes?
Use the 'Delicate' or 'Wool' program with a low temperature (30°C) and reduced spin. Place fragile clothes in a laundry bag.
How to use the delayed start?
Press the 'Delayed start' button and select the desired delay (1 to 24 h) using the selector. The machine will start automatically at the scheduled time.
How to clean the drum?
Run a drum cleaning cycle (empty, at 90°C) using a specific cleaner or white vinegar. Repeat every 2 months to prevent mold.
What to do in case of error code E1?
Code E1 indicates a drainage problem. Check the filter and the hose. If the error persists, restart the machine or call a professional.
How to maintain the door seal?
Wipe the seal with a damp cloth after each wash to prevent moisture and mold buildup. Leave the door slightly open between cycles.
Can you wash wool clothes with this washing machine?
Yes, use the 'Wool' program with a suitable detergent. Set the temperature to max 30°C and spin speed to 400 rpm to avoid felting.
How to reduce noise during spin?
Make sure the machine is level and the feet are properly adjusted. Avoid overloading the drum. Check that there are no hard objects in the laundry.

User questions about THASN276TMR5-S HAIER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Washing machine in PDF format for free! Find your manual THASN276TMR5-S - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. THASN276TMR5-S by HAIER.

USER MANUAL THASN276TMR5-S HAIER

IT 3

DE 11

EN 19

ES 27

FR 35

NL 43

PT 51

BG 59

HR 67

HU 75

SL 83

SR 91

CS 99

PL 107

RO 115

SK 123

UA 131

EL 139

DA 147

SV 155

FI 163

NO 171

IT

Technical line drawing of a front view of a washing machine (no text or symbols present).

50 cm max, 100 cm max, +2.6 mm max, min 4 cm, max 50 cm, max 85 cm.

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and connection details.

PROGRAMMAHAIER THASN276TMR5-S - IT - 5 (MAX)(vedere pannello di controllo)HAIER THASN276TMR5-S - IT - 6DETERGENTELAVAGGIO NOTTURNOEXTRARISCIACQUOIGIENE +STIRATURA FACILELIVELLO MACCHIEPARTENZA RITARDATA
5kg5,5kg6kg6,5kg7kg7,5kg8kg8,5kg(MAX)1o2HAIER THASN276TMR5-S - IT - 7
HAIER THASN276TMR5-S - IT - 8RAPIDO 44'33333,53,53,53,53,540°///
HAIER THASN276TMR5-S - IT - 9RAPIDO 14'11111111,51,530°///
HAIER THASN276TMR5-S - IT - 10MISTI & COLORATI 59'55,566,577,588,540°///
HAIER THASN276TMR5-S - IT - 11LANA / LAVAGGIO A MANO11111112230°//
HAIER THASN276TMR5-S - IT - 12STIRATURA FACILE PLUS1,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52-///
HAIER THASN276TMR5-S - IT - 13SCARICO & CENTRIFUGA---------///
HAIER THASN276TMR5-S - IT - 14RISCIACQUO---------///
HAIER THASN276TMR5-S - IT - 15STEAM HYGIENE PLUS2,52,533,53,54460°///
HAIER THASN276TMR5-S - IT - 16BABY CARE22222,52,52,52,540°/
HAIER THASN276TMR5-S - IT - 17FRESH CARE22222,52,52,52,540°///
HAIER THASN276TMR5-S - IT - 18ECO 40-6055,566,577,588,560°///
HAIER THASN276TMR5-S - IT - 1920°C55,566,577,588,560°/
[CCSK]SINTETICI2,52,5333,53,54460°(●)
HAIER THASN276TMR5-S - IT - 20COTONE55,566,577,588,590°(●)/
HAIER THASN276TMR5-S - IT - 21CONTROLLO REMOTO (Wi-Fi)Posizione da selezionare quando si desidera abilitare il controllo remoto tramite l'app (via Wi-Fi).

Technical diagram of a computer tower case with labeled component C, showing internal structure and ventilation slots.

graph TD A["Open Bin"] --> B["Recycle Symbol"] B --> C["Recycle Bin"] style A fill:#f9f,stroke:#333 style C fill:#ccf,stroke:#333

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max, 100 cm max, +2.6 m max, min 4 cm, max 50 cm, max 85 cm.

⑦ 1

8 A B 9 D C

Only 2.4 GHz band Wi-Fi Home WLAN: - Name - Password C

Welcome Anna! No appliance has home tailored yet The following is your own home appliance. ADD APPLIANCES E

Hello Annal! Your app names Hello Annal Hello Annal Hello Annal

PROGRAMM[YY23](MAX.)(siehe Bedienfeld)HAIER THASN276TMR5-S - IT - 31WASCHMITTELNACHTPROGRAMMEXTRA SPÜLENHYGIENE+BÜGELLEICHTVERSCHMUTZUNGSGRADSTARTZEITVERZÖGERUNG
5kg5,5kg6kg6,5kg7kg7,5kg8kg8,5kg(MAX.)1oder2[K87WI]
HAIER THASN276TMR5-S - IT - 32KURZ 44'33333,553,5353,540°///
[XCSH]KURZ 14'1111111,51530°///
HAIER THASN276TMR5-S - IT - 33MISCH- & BUNTWÄSCHE 59'55,566,577,588,540°///
[027W]WOLLE/HANDWÄSCHE1111112230°//
[05XD]BÜGELLEICHT PLUS1,511,5151,5151,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,1,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,51,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52--------///
HAIER THASN276TMR5-S - IT - 34ABPUMPEN & SCHLEUDERN--------///
HAIER THASN276TMR5-S - IT - 35SPÜLEN--------////
[83G]DAMPF HYGIENE PLUS2,52,5333,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,54,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,532,52,5333,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,2,52,5333,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53, 53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,53,2,52,53352,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,22222,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,53,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52 ,22222,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52 ,22212,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,51,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52,52 ,211111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111110000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
[XWX]ECO 40-6055,566,577,588,560°///
[XSA0]20°C55,566,577,588,560°/
[XHX8]SYNTHETIK2,52,5333,53,54460°(●)
[6244]BAUMWOLLE55,566,577,588,590°(●)/ ○
HAIER THASN276TMR5-S - IT - 36FERNBEDIENUNG (Wi-Fi)Muss eingestellt werden, wenn Sie den Trockner dezentral über die App (über Wi-Fi) bedienen möchten.

Diagram showing four steps of inserting a device into a device, labeled A to D with arrows indicating insertion and disassembly.

HAIER THASN276TMR5-S - IT - 38

EN Washing machine Top loader

HAIER THASN276TMR5-S - EN Washing machine Top loader - 1

Before using the device, carefully read the safety instructions.

Before using the washing machine, it is absolutely necessary to remove the screws and transport lock spacers.

For detailed instructions on the removal procedure, see the Installation Instructions

HAIER THASN276TMR5-S - Before using the device, carefully read the safety instructions. - 1

Download the hOn AppHAIER THASN276TMR5-S - Before using the device, carefully read the safety instructions. - 2

HAIER THASN276TMR5-S - Before using the device, carefully read the safety instructions. - 3

1. Installation

1.1 - Transportation bolts removal

  • Remove the 2 or 4 transportation screws (A) on the back and remove the 2 or 4 flat washers, rubber bungs and plastic spacer tubes (B) as illustrated in figure 1. • Fit the trims provided "C" (fig. 2).

1.2 - Carefully remove and dispose of the protective profile located under the washing machine door (as shown in Figure 3).

Technical diagram of a device rear panel with labeled components A and B

Technical diagram of a front-mounted computer case with labeled components and part number ②

1.3 - Aligning the appliance

- Level the machine by adjusting the front feet (fig. 4).

a) Turn the nut clockwise to release the screw on the foot. b) Raise or lower the foot by rotating it until it stands firmly on the floor. c) Lock the foot in position by turning the nut anticlockwise until it comes up against the bottom of the washing machine.

  • Check that the appliance is properly levelled.
  • Check that the washing machine does not rock by trying to move two diagonally opposite top corners at the same time.
  • If you move the washing machine from one place to another, you must level the feet again afterwards.

1.4 - Hydraulic connections

  • The washing machine should be connected to the water mains via the new tube supplied with the appliance (inside the drum). Do not use the old tube for this purpose.
  • Connect one end of the water inlet pipe with the elbow bend to the electrovalve (top rear part of the machine) and the other end to a tap or a plumbed-in 3/4" gas threaded connection
  • Place the washing machine close to the wall, ensuring that there are no bends or kinks anywhere in the tube.
  • Hook the outlet pipe to the edge of the sink or preferably to a fixed drainage outlet of a diameter greater than that of the outlet pipe and at a height of min. 50 cm and a maximum of 75 cm from the floor (fig. 5).
  • If necessary, use the curved* accessory to attach and support the outlet pipe more securely.

graph TD A["Open Bin"] --> B["Recycle Symbol"] B --> C["Recycle Bin"] C --> D["Recycle Icon"]

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max 100 cm +2.6 m max min 4 cm max 50 cm max 85 cm

* Accessory sold separately

  • Connect the water hose to the water supply tap (fig. 6) only using the hose supplied with the appliance (do not reuse old hose-sets).
  • Some models may include one or more of the following features:
  • HOT&COLD (fig. 7): water mains connection settings with hot and cold water for higher energy savings. Connect the grey tube to the cold water faucet and the red one to the hot water faucet. The machine can be connected to the cold water faucet only: in this case, some programs may start a few minutes later.
  • AQUASTOP (fig. 8): a device located on the supply tube that stops water flow if the tube deteriorates; in this case, a red mark will appear in the window "A" and the tube must be replaced. To unscrew the nut, press the one-way lock device "B".
  • AQUAPROTECT - SUPPLY TUBE WITH GUARD (fig. 9): should water leak from the primary internal tube "C", the transparent containment sheath "D" will contain water to permit the washing cycle to complete. At the end of the cycle, contact the Customer Service Centre to replace the supply tube.

Diagram showing a hand holding a valve and a door, with no visible text or symbols

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and connection points.

2. Control panel

6 7 1 2 3 4 5 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Buttons

A Play/Pause

B Temperature selection

C Spin speed

D Easy iron

E Delay start

F Options

G Stain level/Steam level*

H Special programmes (only available on certain models)

B+C Child lock

* Steam level (only available on certain models)

Icons

1 Door locked indicator 2 Easy iron indicator 3 Kg Load indicator light (active only on certain programmes)

4 Wi-Fi indicator 5 Child lock indicator 6 Wash temperature indicator 7 Spin speed indicator

8 Options indicator 9 Stain level indicators 10 Special programmes indicator

2.1 - Buttons

HAIER THASN276TMR5-S - - Buttons - 1

Play/Pause (A)

Close the door BEFORE selecting the button PLAY/PAUSE. To start the selected cycle with the preset parameters, press PLAY/PAUSE. When the programme is running, the display will show the time to elapse.

HAIER THASN276TMR5-S - Play/Pause (A) - 1

Temperature button (B)

This button allows you to change the temperature of the wash cycles. It is not possible to raise the temperature over the maximum allowed for the programme, in order to protect the fabrics. If you want carry out a cold wash all the indicators must be off.

HAIER THASN276TMR5-S - Temperature button (B) - 1

Spin speed button (C)

By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled.

HAIER THASN276TMR5-S - Spin speed button (C) - 1

Easy iron button (D) (Available on some programmes only)

This function allows you to minimize creases as much as possible, eliminating the intermediate spins or reducing the intensity of the last one.

HAIER THASN276TMR5-S - Easy iron button (D) (Available on some programmes only) - 1

Delay start button (E)

This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.

HAIER THASN276TMR5-S - Delay start button (E) - 1

Options button (F)

This button allows you to choose between different options (depending on the selected programme):

HAIER THASN276TMR5-S - Options button (F) - 1

Prewash (F) - This option allows you to make a prewash and it is particularly useful for heavily soiled loads (can be used only on some programmes). When activated, the indicator icon (E) lights up

HAIER THASN276TMR5-S - Options button (F) - 2

Extra rinse (F) - This option allows you to add one rinse at the end of the washing cycle and is useful for people with delicate and sensitive skin. When activated, the indicator icon (F) lights up

HAIER THASN276TMR5-S - Options button (F) - 3

Hygiene + (F) - Activated when you set 60°C of temperature. This option allows deep cleaning of your clothes by maintaining the same temperature for the whole wash.

HAIER THASN276TMR5-S - Options button (F) - 4

Stain level (G)

This option allows you to choose between 3 levels of wash intensity modifying the length of the programme, depending on how much the fabrics are soiled (can only be used on some programmes as shown in the table of programmes).

Steam level (G) (only available on certain models)

After selecting the EASY IRON PLUS programme, you can use this button to choose between three steam treatments of different intensities, designed for dry or wet garments and depending on the type of fabric:

- COTTON (default selection)

This programme is used for cotton garments. On wet fabrics (e.g., after washing), it is suitable for relaxing creases after spinning; on dry fabrics it is instead designed to achieve the ideal humidity level for easier ironing.

- SYNTHETIC (press button once)

This programme is used for synthetic garments. On wet fabrics (e.g., after washing), it is suitable for relaxing creases after spinning; on dry fabrics it is instead designed to achieve the ideal humidity level for easier ironing.

- DELICATES (press button twice)

With the help of steam, the cycle refreshes and relaxes creases in garments after use. The programme consists of an initial phase in which the steam acts and a final phase in which the excess humidity is removed for immediate use. The cycle is suitable for dry fabrics.

HAIER THASN276TMR5-S - - DELICATES (press button twice) - 1

Special programmes (H)

This button allows you to choose between different options (depending on the selected programme):

HAIER THASN276TMR5-S - Special programmes (H) - 1

Single item (H) - This option (which can be set in several programs) optimizes the water and energy consumption of the selected program, maintaining the washing performance unchanged.

HAIER THASN276TMR5-S - Special programmes (H) - 2

Night wash (H) - This option reduces the intermediate spin speed to 400 rpm, where applicable, increases the water level during rinsing and keeps the laundry immersed in water after the final rinse, in order to spread the fiber perfectly.

HAIER THASN276TMR5-S - Special programmes (H) - 3

Drum clean (H) - Developed to clean the washing machine drum. Use only powder detergent. Do not start the programme with laundry in the washing machine. It is suggested that this is carried out after every 50 washing cycles. The option can only be selected for the DRAIN & SPIN programme.

HAIER THASN276TMR5-S - Special programmes (H) - 4

Child lock (B+C)

- Pressing simultaneously the buttons "TEMPERATURE SELECTION" and "SPIN SPEED" for about 3 seconds, the machine allows you to lock the keys. In this way, you can avoid making accidental or unwanted changes if a button on the display is pressed accidentally during a cycle.

- The key lock can be simply cancelled by pressing the two buttons simultaneously again or turning off the appliance.

HAIER THASN276TMR5-S - Child lock (B+C) - 1

APPLIANCE PAIRING (ON APP)

NOTE: The frequency of the home Wi-Fi network has to be set on the 2.4 GHz band. (5 GHz band not allowed).

  • Download the hOn App on your device by framing the following QR code or by the link: go.haier-europe.com/download-app • Create the user profile (or log-in) and pairing the appliance following the instructions on the device display.

Download the AppHAIER THASN276TMR5-S - APPLIANCE PAIRING (ON APP) - 1

HAIER THASN276TMR5-S - APPLIANCE PAIRING (ON APP) - 2

Personal profile Name: Female: Gender: Address: @jpmgat.com Email: Mail: Mail:

2.4 GHz band onlyWi-Fi Home Wi-Fi: - Name - Password

Follow pairing instructions

hOn App hOn

Welcome Anna! No appliance has been paired yet ADD APPLIANCE!

Hello Anna! Your app? Enter Before 1 Do you call to you at your app!

A B C D E F

TO ENABLE REMOTE CONTROL

- Close the door and turn the knob to the REMOTE CONTROL (Wi-Fi) position. You can now manage your product from the app.

TO DISABLE REMOTE CONTROL

- Turn the knob to any position other than REMOTE CONTROL (Wi-Fi), without going through the OFF. If there is a cycle underway, it will continue. From the app it is possible to view the status of the product but not to control it.

2.2 - Icons

HAIER THASN276TMR5-S - - Icons - 1

Door lock indicator (1)

For safety reasons the door is locked partially during the washing cycle. It is only possible to open the door at the end of the program or after the program was cancelled correctly. In case of high water level, high water temperature and during spinning it is not possible to open the door.

HAIER THASN276TMR5-S - Door lock indicator (1) - 1

Easy iron indicator light (2):

The indicator light shows the selection of the relevant option.

HAIER THASN276TMR5-S - Easy iron indicator light (2): - 1

Kg Load indicator light (3): (active only on certain programmes).

Through every wash phase "Kg Load" allows to monitor information on the wash load in the drum and in the first minutes of the wash it:

  • adjusts the amount of water required; determines the length of the wash cycle; controls rinsing according to the type of fabric selected to be washed.
  • adjusts the rhythm of drum rotation for the type of fabric being washed.
  • recognizes the presence of too much soap suds, and if necessary, adjusts the amount of rinse water.
  • adjusts the spin speed according to the load, thus avoiding any imbalance.

HAIER THASN276TMR5-S - Easy iron indicator light (2): - 2

Wi-Fi indicator light (4): On models equipped with Wi-Fi, it indicates the status of the connection.

HAIER THASN276TMR5-S - Easy iron indicator light (2): - 3

Key lock indicator light (5): The indicator light shows that the keys are locked.

HAIER THASN276TMR5-S - Easy iron indicator light (2): - 4

Wash temperature indicator light (6)

This shows the washing temperature of the selected programme that can be changed (where allowed) by the relevant button. If you want to carry out a cold wash, all the indicators must be off.

HAIER THASN276TMR5-S - Wash temperature indicator light (6) - 1

Spin speed indicator light (7)

This shows the spin speed of the selected programme; you can reduce or omit it by the relevant button.

HAIER THASN276TMR5-S - Spin speed indicator light (7) - 1

HAIER THASN276TMR5-S - Spin speed indicator light (7) - 2

HAIER THASN276TMR5-S - Spin speed indicator light (7) - 3

Options indicator light (8)

The indicator lights show the options that can be selected by the relevant button.

HAIER THASN276TMR5-S - Options indicator light (8) - 1

HAIER THASN276TMR5-S - Options indicator light (8) - 2

HAIER THASN276TMR5-S - Options indicator light (8) - 3

Stain level indicator light (9)

Once the programme has been selected, the indicator light will automatically show the stain level set for that programme.

Selecting a different stain level will light up the relevant indicator.

HAIER THASN276TMR5-S - Stain level indicator light (9) - 1

HAIER THASN276TMR5-S - Stain level indicator light (9) - 2

HAIER THASN276TMR5-S - Stain level indicator light (9) - 3

Special programmes indicator light (10) *Only available on certain models

The indicator lights show the options that can be selected by the relevant button.

3. Programmes

HAIER THASN276TMR5-S - Programmes - 1

Yes

HAIER THASN276TMR5-S - Programmes - 2

Yes by pressing the button

HAIER THASN276TMR5-S - Programmes - 3

Optionals

HAIER THASN276TMR5-S - Programmes - 4

No

HAIER THASN276TMR5-S - Programmes - 5

HAIER THASN276TMR5-S - Programmes - 6

HAIER THASN276TMR5-S - Programmes - 7

Detergent compartment for:

HAIER THASN276TMR5-S - Programmes - 8

② Detergent

HAIER THASN276TMR5-S - Programmes - 9

Softener or care product

HAIER THASN276TMR5-S - Programmes - 10

Prewash

PROGRAMME(K3ZZ)(MAX.)(see control panel)HAIER THASN276TMR5-S - Programmes - 11DETERGENTNIGHT WASHEXTRARINSEHYGIENE+EASY IRONSTAIN LEVELDELAY START
5kg5.5kg6kg6.5kg7kg7.5kg8kg8.5kg(MAX.)1 or 2(BK7B)(SZDD)
[2AVA]RAPID 44'33333.53.53.53.540°/ ○/ / /
[2T62]RAPID 14'1111111.51.530°/ ○/ / /
[YXAC]MIXED & COLOURED 59'55.566.577.588.540°/ ○/ / /
[4OH0]WOOL/HAND WASH1111112230°/ ○/ ○
HAIER THASN276TMR5-S - Programmes - 12EASY IRON PLUS1.51.51.51.51.51.51-/ / /
[2Y3Y]DRAIN & SPIN---------/ / /
[8DG7]RINSE---------/ / /
[582C]STEAM HYGIENE PLUS2.52.5333.53.544.60°/ ○/ / /
[TZ02]BABY CARE22222.52.52.52.540°/ ○
HAIER THASN276TMR5-S - Programmes - 13FRESH CARE22222.52.52.52.540°/ ○/ / /
HAIER THASN276TMR5-S - Programmes - 14ECO 40-6055.566.577.588.560°/ / /
[2W4Z]20°C55.566.577.588.560°/ / ○
[4806]SYNTHETICS2.52.5333.53.544.60°(●)
HAIER THASN276TMR5-S - Programmes - 15COTTON55.566.577.588.590°(●)/ ○
[WBT0]REMOTE CONTROL (Wi-Fi)Position that you have to select when you want to enable remote control through the App (via Wi-Fi).

3.1 - Programmes description

HAIER THASN276TMR5-S - - Programmes description - 1RAPID 44'A complete washing cycle (wash, rinse and spin). This programme is particularly suited to slightly dirty cottons and mixed fabrics. With this programme it is recommended to use only 20% of the detergent normally used to avoid waste.
[YADW]RAPID 14'A complete washing cycle (wash, rinse and spin). This programme is suited to slightly dirty cottons and mixed fabrics. With this programme it is recommended to use only 20% of the detergent normally used to avoid waste.
[420H]MIXED & COLOURED 59'*This programme offers you the freedom to wash all kinds of fabrics and non-fading colours together, with a full load, obtaining excellent results in only 59 minutes. With washing at medium temperature, this programme is recommended for laundry that is not particularly dirty.* Preset temperature of 20°C (modifiable by the relevant button). The washing cycle is also suitable for washing cotton fabrics.
[ABDX]WOOL/HAND WASHThis programme performs a wash cycle dedicated to the wool fabrics that can be washed in a washing machine, the articles to be washed by hand or laundry items made from silk or specified as "Wash as Silk" on the fabric label.
[720W]EASY IRON PLUSThis programme uses a steam treatment to relax creases and achieve the ideal degree of humidity for easier ironing. Three different intensity levels can be selected via the button, designed for dry or wet garments and depending on the type of fabric.
[WW6W]DRAIN & SPINThe program completes the drain and a maximum spin. It is possible to delete or reduce the spin through the SPIN SELECTION button.
[WOKO]RINSEThis program performs 3 rinses with an intermediate spin (which can be reduced or excluded by using the appropriate button). It is used for rinsing any type of fabric, for example after a wash carried out by hand.
[YSKK]STEAM HYGIENE PLUSThis washing programme is capable of reaching a temperature of 60°C for an extended period of time, combining the steam action with a powerful rinsing action for thoroughly clean and hygienic clothing. Recommended for cotton fabrics.
HAIER THASN276TMR5-S - - Programmes description - 2BABY CAREThis program allows you to wash all baby clothes getting a perfect clean and sanitizing effect, setting the temperature at 60°C minimum. To optimize the result of the sanitizing effect we recommend the use of powder detergent.
HAIER THASN276TMR5-S - - Programmes description - 3FRESH CAREThis programme is designed to remove everyday stains with a refreshing action to guarantee outstanding laundry. Low temperature wash recommended for small loads.
[XADY]ECO 40-60The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle. This programme is used to assess the compliance with the EU Ecodesign legislation (environmentally friendly products design).
[6402]20°CThis innovative programme, allows you to wash different fabrics and colours together, such as cottons, synthetics and mixed fabrics at only 20°C and provides an excellent cleaning performance. Consumption on this program is about 40% of a conventional 40°C cottons wash.
[TOYD]SYNTHETICSThis program is studied for synthetics fabrics (as Polyester, Viscos) or mixed cotton lightly dirty. The drum movements and rinses are set in order to optimize the washing phases. The delicate spin phase can decrease the creases on the clothes.
[2032]COTTONThis programme is suitable for washing coloured cotton garments at 40°C or for ensuring the highest degree of cleanliness for cotton resistant laundry washing at 60°C or 90°C. The final spin is at maximum speed that ensures excellent water removal.

4. Daily use

  • Connect the washing machine to a power supply and water connection (see installation chapter on user manual).
  • Prepare the laundry: Sort out clothes according to fabric (cotton, synthetics, wool or silk etc.) and how dirty they are. Check the labels on your garment. Separate white clothes from colored ones. Empty pockets from objects like keys, coins, etc. and remove harder decorative objects.
  • Put in the laundry piece by piece, avoiding overloads (check the different maximum load capacity according to the program). Close the door carefully. Make sure that no pieces of laundry are pinched.
  • Select the detergent and softener (when needed) and pour it into the correct compartments of the dispenser.

Open the dispenser drawer; the following components can be seen (Fig. 4.1):

  1. Compartment 1 is for powder detergent.
  2. Compartment 2 is for liquid detergent.
  3. The compartment ✿ is for fabric conditioners, scenting agents, and special additives such as starch, blueing, etc.

The recommendation on the type of detergents is suitable for the various washing temperatures; please refer to the detergent manual (see ).

Diagram showing a device with two labeled buttons (① and ②) and a close-up of a connector panel (no text or symbols present)

  • Select a program by turning the knob, choosing the one that fits the most according to the loaded garments. The display will show the program name, the main options, and the duration estimation.
  • Add or remove options and change the parameters according to your specific needs.
  • Press the Start/Pause button to start the program.
  • When the cycle is finished, "END" is shown on the display. Switch off the washing machine by turning the selector to OFF. Remove your laundry as soon as possible in order to prevent wrinkles, bad odors, and bacteria from proliferating.

5. Care and maintenance

5.1 - General machine cleaning

  • Unplug the machine during cleaning and maintenance.
  • Use a soft cloth with soap liquid to clean the machine case and rubber components.
  • Do not use organic chemicals or corrosive solvents.

5.2 - Pump filter cleaning

It is recommended to clean the pump filter once a month.

Turn off and unplug the machine and open the cover on the bottom of the appliance. Prepare a flat container to catch leach water.

  • Pull the drain hose out and hold its end above the container and open it. After complete drainage, close the drain hose and push it back into the machine.
  • Unscrew and remove counter-clockwise the pump filter and clean it carefully.
  • Put the filter back in the machine and close it carefully.

5.3 - Cleaning the detergent dispenser and its compartments

Always take care there are no detergent residues. Clean the drawer regularly:

  • Press button (A).
  • Hold down the button and turn the detergent dispenser outwards.
  • Remove the dispenser and clean it.
  • It is recommended to remove any remaining detergent in the compartments to avoid any build up that could cause blockages and restrict the water flow from the dispenser to drum.
  • Pull out and extract the trap/traps (B) that are located in the back part of the dispenser and clean them carefully.
  • Remove any solid residue which could block the holes in the compartments.

Diagram showing four steps of inserting a device into a device, labeled A, B, C, and D.

5.4 - Cleaning the drum

  • Remove accidentally washed items, especially metal parts such as pins, coins, etc. from the drum and the groove of the door gasket (rubber ring) because they cause rust stains and damage.
  • Use a non-chloride cleaner for removing rust stains. Observe the warning hints of the cleaning agent manufacturer.
  • Do not use any hard objects or steel wool for cleaning. • After the procedure, open the door, use a towel to clean the stains and foam around the gasket, and keep the inside and outside of the gasket clean.

Download and read the complete User Manual online for more details on Care&Maintenance

HAIER THASN276TMR5-S - Download and read the complete User Manual online for more details on Care&Maintenance - 1

ES Lavadora de carga superior

Technical diagram of a device casing with labeled components A and B, showing internal structure and assembly details.

Technical diagram of a desktop computer case with labeled component C, showing internal casing and drive structure

graph TD A["Open Bin"] --> B["Recycle Symbol"] B --> C["Recycle Icon"] C --> D["Recycle Bin"]

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max. 100 cm +2.6 m max. 4 cm max. 50 cm max. 85 cm

⑦ 1

8 B A 9 D C

Botones

HAIER THASN276TMR5-S - Botones - 1

FR Lave-linge top

Technical diagram of a desktop computer case with labeled component C, showing internal casing and drive structure.

graph TD A["Open Bin"] --> B["Recycle Symbol"] B --> C["Recycle Bin"] C --> D["Recycle Icon"]

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max 100 cm +2.6 m max min 4 cm max 50 cm max 85 cm

⑦ 1

Technical diagram showing two configurations (8 and 9) of a mechanical assembly with labeled parts A, B, C, D.

Touches

ACTIVATION DU CONTRÔLE À DISTANCE

Diagram showing four steps of inserting a device into a folder, labeled A, B, C, and D.

Diagram showing four steps of inserting a device into a folder, labeled A, B, C, and D.

HAIER THASN276TMR5-S - ACTIVATION DU CONTRÔLE À DISTANCE - 3

NL Wasmachine, bovenlader

Technical diagram of a device rear panel with labeled components A and B, showing internal structure and wiring.

Technical diagram of a computer tower case with labeled component C, showing internal structure and ventilation slots.

graph TD A["Open Bin"] --> B["Recycle Symbol"] B --> C["Recycle Bin"] style A fill:#f9f,stroke:#333 style C fill:#ccf,stroke:#333

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max. 100 cm +2.6 m max. max. 4 cm max. 50 cm max. 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and connection points.

2. Bedieningspaneel

6 7 1 2 3 4 5 8 9 10 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Toetsen

APPARAATKOPPELING (IN DE APP)

Diagram showing four steps of installing or removing a device, labeled A to D with arrows and a magnified inset.

Diagram showing four steps of installing or removing a device, labeled A to D with arrows and a magnified inset.

Technical diagram of a device rear panel with labeled components A and B, showing internal structure and wiring.

Technical diagram of a computer tower case with labeled component C, showing internal structure and ventilation slots.

50 cm min. 4 cm +2.6 m 100 cm max. 50 cm max. 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and connection points.

Botões

APPLIANCE PAIRING (NA APP)

5.4 - Drum cleaning

Technical line drawing of a front view of a computer tower with a labeled component.

graph TD A["Open Bin"] --> B["Recycle Symbol"] B --> C["Recycle Bin"] C --> D["Recycle Symbol"]

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm MAX. 100 cm +2.6 m MAX. MIN. 4 cm MAX. 50 cm MAX. 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components with parts A, B, C, D and numbered annotations 8 and 9.

Technical diagram of a front-mounted computer case with labeled component C.

1.3 - Leveling the appliance

- Level the machine by adjusting the front feet (figure 4).

a) Turn the nut to the right to release the screw on the foot. b) Raise or lower the foot by turning it until it firmly touches the ground. c) Lock the foot in position by turning the nut to the left until it reaches the bottom of the washing machine.

• Check that the appliance is properly leveled. - Check if the washing machine rocks by trying to move two diagonally opposite top corners at the same time. - If you move the washing machine from one place to another, you must re-level the feet afterwards.

1.4 - Water connections

50 cm max 100 cm max +2.6 m min 4 cm max 50 cm max 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and assembly details.

Delay Start button (E)

With this button you can pre-program the wash cycle and delay the start of the cycle up to 24 hours.

HAIER THASN276TMR5-S - Delay Start button (E) - 1

Options button (F)

With this button you can choose between different options (depending on the selected program):

HAIER THASN276TMR5-S - Options button (F) - 1

Pre-wash (F) - this option allows pre-washing and is especially useful for heavily soiled laundry (can only be used with some programs). When activated, the indicator icon (E) lights up

HAIER THASN276TMR5-S - Options button (F) - 2

Extra rinse (F) - this option allows adding an extra rinse at the end of the wash cycle and is useful for people with sensitive skin. When activated, the indicator icon (F) lights up

Interior view of a refrigerator with labeled buttons and a close-up of the interior panel (no visible text or symbols)

Diagram showing four steps of inserting a device into a panel, labeled A, B, C, and D.

Technical diagram of a device casing with labeled components A and B, showing internal structure and mounting points.

Technical line drawing of a front view of a washing machine (no text or symbols present)

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max. 100 cm max. +2.6 m min. 4 cm max. 50 cm max. 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and assembly details.

2. Control panel

6 7 1 2 3 4 5 8 9 10 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Buttons

A Start/Pause

Diagram showing four steps of inserting or removing a device into a container, labeled A, B, C, and D.

Technical diagram of a device rear panel with labeled components A and B

Technical diagram of a front-mounted computer case with labeled component C

1.3 – Leveling the appliance

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

⑦ 1

⑧ A B ⑨ C D

2. Control panel

6 7 1 2 3 4 5 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Buttons

A On/Pause B Temperature selection C Spin speed D Easy ironing E Delay start F Options G Soil level/steam level* H Special programs (available only on some models) B+C Child lock

* Steam level (available only on some models)

Icons

Diagram showing four steps of inserting a device into a panel, labeled A, B, C, and D.

HAIER THASN276TMR5-S - Icons - 2

Top-loading washing machine

Technical diagram of a device rear panel with labeled components A and B

Technical diagram of a front-mounted computer case with labeled components and part number ②

1.3 - Leveling the appliance

- Level the machine by adjusting the front feet (fig. 4).

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm maks. 100 cm +2.6 m maks. max. min. 4 cm maks. 50 cm maks. 85 cm

* Accessories are sold separately

  • Connect the water inlet hose to the water tap (fig. 6) only using the hose supplied with the appliance (do not reuse old hose sets).
  • Some models may have one or more of the following functions:
  • HOT&COLD (fig. 7): connection settings to the water supply with hot and cold water for greater energy savings. Connect the grey hose to the cold water tap and the red hose to the hot water tap. The appliance can be connected only to the cold water tap: in that case, some programs may start a few minutes later.
  • AQUASTOP (fig. 8): a device located on the inlet hose that stops the water flow if something is wrong with the hose; in that case, a red mark appears in the slot "A" and the hose must be replaced. To unscrew the nut, press the safety catch "B".
  • AQUAPROTECT – INLET HOSE WITH PROTECTOR (fig. 9): if water leaks from the primary inner hose "C", there will be water in the transparent protective sheath "D" to allow the wash cycle to complete. At the end of the cycle, contact the Customer Service Center to replace the inlet hose.

Diagram showing a faucet and valve assembly with a dashed outline (no text or symbols)

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and connection details.

2. Control panel

6 7 1 2 3 4 5 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Buttons

A Start/pause

B Temperature selection

C Spin speed

D Easy ironing

E Delayed start

F Options

G Soil level/steam level*

H Special programs (available only on certain models)

B+C Key lock

* Steam level (available only on certain models)

Icon

E

Hello Anna! Your avatars OK - OK User Name 1 Do not have any answer!

F

ACTIVATING WIRELESS CONTROL

- Close the door and turn the round knob to the WIRELESS CONTROL (Wi-Fi) position. You can now control the product from the app.

DEACTIVATING WIRELESS CONTROL

- Turn the round knob to any position other than WIRELESS CONTROL (Wi-Fi), without passing through OFF. If a cycle was in progress, it will continue. From the app, you can view the product status, but not control it.

2.2 - Icons

HAIER THASN276TMR5-S - - Icons - 1

Door lock indicator (1)

Diagram showing four steps of inserting a device into a panel, labeled A, B, C, and D.

Technical diagram of a refrigerator internal structure with labeled components A and B

Technical diagram of a front-mounted computer case with labeled component C

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max. 100 cm max. +2.6 m min. 4 cm max. 50 cm max. 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and connection points.

2. Control panel

6 7 1 2 3 4 5 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Buttons

Diagram showing four steps of inserting a device into a panel, labeled A, B, C, and D.

Technical diagram of a device casing with labeled components A and B, showing internal structure and assembly lines.

Technical diagram of a desktop computer case with labeled component C, showing internal casing and drive structure

50 cm max. 100 cm +2.6 m max. max. 50 cm max. 85 cm min. 4 cm

⑦ 1

8 A B 9 D C

2. Control panel

6 7 1 2 3 4 5 8 9 10 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Buttons

Diagram showing four steps of inserting a device into a device, labeled A to D with Chinese text and arrows indicating insertion.

HAIER THASN276TMR5-S - Buttons - 2

RO

Technical diagram of a front-mounted washing machine with labeled component C.

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max 100 cm +2.6 m max. min. 4 cm max 50 cm max 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components with parts A, B, C, D and numbered 8 and 9.

2. Control panel

6 7 1 2 3 4 5 8 9 10 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Buttons

Technical diagram of a front-mounted computer case with labeled components and part number ②

1.3 - Leveling the appliance

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max 100 cm +2.6 m max min 4 cm max 50 cm max 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and connection details.

Buttons

A Start/Pause B Temperature selection C Spin speed D Easy iron E Delayed start F Options G Soil level/steam level* H Special programs (available only on certain models) B+C Child lock * Steam level (available only on certain models)

Icons

E

Hello Anna! Your app? Close Next Enter Next 3 Do not change your app!

F

ENABLE REMOTE CONTROL

Illustration showing four steps of inserting or removing a device, labeled A to D with arrows indicating insertion and disassembly.

HAIER THASN276TMR5-S - ENABLE REMOTE CONTROL - 2

70027464

UA

graph TD A["Open Bin"] --> B["Recycle Symbol"] B --> C["Recycle Bin"] C --> D["Recycle Symbol"]

Technical diagram of a front-mounted washing machine with labeled component C.

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm Max. 100 cm +2.6 m Max. Min. 4 cm Max. 50 cm Max. 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and connection points.

Buttons

Technical diagram of a computer tower case with labeled component C, showing internal structure and ventilation slots.

graph TD A["Open Bin"] --> B["Recycle Symbol"] B --> C["Recycle Bin"] style A fill:#f9f,stroke:#333 style C fill:#ccf,stroke:#333

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm Max. 100 cm +2.6 m Min. 4 cm Max. 50 cm Max. 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components with parts A, B, C, D and numbered 8 and 9.

E

Hello Annal! Your app session New NEW 2 The app is installed!

F

Diagram showing four steps of inserting a device into a folder, labeled A to D with Chinese text.

HAIER THASN276TMR5-S - Buttons - 9

DA Topbetjent vaskemaskine

Technical diagram of a device rear panel with labeled components A and B

Technical diagram of a front-mounted washing machine with labeled component C

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max. 100 cm +2.6 m max min. 4 cm max. 50 cm max. 85 cm

⑦ 1

8 A B 9 D C

2. Control panel

6 7 1 2 3 4 5 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Button

MACHINE PAIRING (IN APP)

HAIER THASN276TMR5-S - MACHINE PAIRING (IN APP) - 1

HAIER THASN276TMR5-S - MACHINE PAIRING (IN APP) - 2

HAIER THASN276TMR5-S - MACHINE PAIRING (IN APP) - 3

HAIER THASN276TMR5-S - MACHINE PAIRING (IN APP) - 4

70027464HAIER THASN276TMR5-S - MACHINE PAIRING (IN APP) - 5

SV

Technical diagram of a front-mounted computer case with labeled components and part number ②

1.3 - Align/adjust the appliance

Diagram illustrating a mechanical or electrical operation with labeled steps and directional arrows indicating motion.

50 cm max. 100 cm +2.6 m max. min. 4 cm max. 50 cm max. 85 cm

⑦ 1

Technical diagram showing two labeled mechanical components with parts A, B, C, D and numbered annotations 8 and 9.

2. Control panel

6 7 1 2 3 4 5 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Buttons

A Start/Pause

B Temperature selection

C Spin speed

D Easy iron

E Delayed start

F Options

E

Hello Anna! Your injection OK OK User Note 1 Do not have an option!

F

ACTIVATE REMOTE CONTROL

Diagram showing four steps of inserting a device into a panel, labeled A to D with arrows indicating insertion and connection.

Technical diagram of a refrigerator internal structure with labeled components A and B

Technical diagram of a front-mounted computer case with labeled component C

Diagram showing a hand holding a valve and a close-up of a mechanical component (no text or symbols)

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and connecting rods.

2. Control panel

6 7 1 2 3 4 5 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Buttons

B

Only 2.4 GHz frequency range Wi-Fi Home Wi-Fi: - Name - Password

C

Welcome Anna! No appliance has been pulled out The following is your first appliance NEW APPLIANCE

E

Hello Anna! Your app login + off Enter Sides 1 My first is a new? OK

F

Technical diagram of a front-mounted computer case with labeled component C

⑦ 1

Technical diagram showing two labeled mechanical components (A, B, C, D) with numbered parts and connecting rods.

2. Control panel

6 7 1 2 3 4 5 90° 1200 60° 1000 40° 800 30° 400 20° B C D E F G H A

Buttons

A Start / Pause

B Temperature selection

C Spin speed

D Easy iron

E Delayed start

F Options

Delayed start button (E)

APPARATUS PAIRING (ON APP)

Diagram showing four steps of installing or adjusting a device panel, labeled A to D with Chinese text.

HAIER THASN276TMR5-S - APPARATUS PAIRING (ON APP) - 2

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : HAIER

Model : THASN276TMR5-S

Category : Washing machine