TQ 4160S BF - Cooker HOTPOINT - Free user manual and instructions

Product Type	Freestanding Gas Cooker with Electric Oven
Brand	Hotpoint
Model	TQ 4160S BF
Dimensions (H x W x D)	85 cm x 55 cm x 60 cm
Weight	Approx. 55 kg
Power Supply	Electric oven: 230 V / 50 Hz; Gas hob: mains gas (NG or LPG convertible)
Hob Type	Gas burners (4 burners, including one triple-ring)
Oven Type	Electric fan oven (multifunction)
Oven Functions	Conventional, Fan Grill, Fan Assisted, Defrost, Pizza
Grill	Electric grill with variable temperature
Energy Efficiency Class	A
Cleaning	Easy-clean enamel interior; removable oven door and catalyctic panels
Safety Features	Flame failure device on all burners; child lock; oven door safety lock
Control Type	Rotary knobs for hob; electronic timer/display for oven
Accessories Included	2 oven shelves, 1 drip tray, grill pan and handle
Repairability Index	8.5/10 (easily accessible parts, spare parts available)
Warranty	2 years parts and labor

Frequently Asked Questions - TQ 4160S BF HOTPOINT

How do I convert the hob from natural gas to LPG?

The TQ 4160S BF can be converted from natural gas to LPG. You will need to replace the injectors on each burner. Refer to the conversion kit instructions in the manual or contact a qualified technician. The kit typically includes injectors and a regulator adjustment tool.

What oven functions are available and what are they used for?

The oven offers several functions: Conventional for traditional baking, Fan Grill for even grilling, Fan Assisted for faster cooking, Defrost for thawing, and Pizza for crispy bases. Refer to the manual for specific usage tips.

How do I clean the oven interior?

The oven has an easy-clean enamel interior and catalytic panels. Wipe with a damp cloth after use. For stubborn stains, use a non-abrasive oven cleaner. The oven door can be removed for deeper cleaning. Do not use steam cleaners.

Why is my hob burner not lighting?

Check that the gas supply is on and the burner cap is properly positioned. Ensure the flame failure device is clean. If using a lighter, wait 3 seconds after pressing the knob before releasing. If still not lighting, the spark electrode may need cleaning.

How do I set the timer on the oven?

Press the timer button (clock icon) and use the +/- keys to set desired time. The timer can be used for delayed start or end of cooking. Confirm by pressing the timer button again. Refer to manual for detailed programming.

What does the 'child lock' do and how to activate?

The child lock disables the oven controls. To activate, press and hold the lock button for 3 seconds until a key symbol appears on the display. To deactivate, press and hold again. Note: the hob knobs are not locked.

How often should I replace the oven door seal?

The oven door seal should be replaced if it becomes damaged or loses its elasticity. Typically, every 3-5 years or when you notice heat escaping. A faulty seal can increase energy consumption. Replace with a genuine Hotpoint part.

Can I use aluminum foil in the oven?

Yes, but avoid covering the oven bottom entirely as it can cause heat damage. Use foil on the drip tray or over food to prevent splatters. Do not allow foil to touch the heating elements.

What should I do if the oven is not heating evenly?

Check that the oven fan is working and not blocked. Ensure you are using the correct shelf position and function. Preheating is recommended. If the problem persists, the heating element or thermostat may need inspection by a technician.

Where can I find the spare parts for my TQ 4160S BF?

Hotpoint spare parts can be ordered online through the official Hotpoint website or authorized dealers. Common parts like oven door seals, burner caps, and injectors are readily available. Always use genuine parts for safety.

USER MANUAL TQ 4160S BF HOTPOINT

http://edocs.dotpoint.deu or aHH t H p ofi H fiuff rH s owfHofiH hw rr fityH oo fl tYH

s or H us fi H t H ppfi fi VH r H t s H s tyH fistru tofis" pH ft ff hi r yH orH utur Hr r fi Y s H fistru tofisH fi Ht H ppfi Hi ts fl Hprov H ff port fitH s tyH w rf hi sH toH Ho s rv H th fIH t ff sYH H ff fiu tur RH fi sh flyH fi flythyH orH flur H toH o s rv H t s H s tyH fistru tofisW orH fi ppropr t H us ho t H ppfi Hi orH fi orr th s tt fi Ho H ofitroflsY

⚠️ r "z" x kHz Ht H o H sur H sH r VH oH fiotH us Ht H ppfl fi HWHrs Ho H fl tr Hs o Y

⚠️ r "z" x KU fi RHo HGr KUoHfiotHstor H t ff shofiH t H oo fi Hsur sY

⚠️ tr z—” HH oo fi H pro ssh sH toH H sup rv s YH r H s orth oo fi H pro ssh sH toH H sup rv s H ofit fuouslyY

r "z" xKH fi tt fi H oo fi HofHH o hwt h th orHo fH fiH H fi rousHHrs Ho HGr YH" v v HtryHtoH xt fi us H HGr Hw t Hw t rKH fist WHsw t HoFHt H ppfI fi H fi Ht fiH ov rHE ff H Y YHw t H Hfl HorH H Gr H fl fi tY

⚠️ u o f f i o t h u s H o H s H w o r H s u r H o r s u p p o r t H “ pH fl o t s H o r t o t r H E f f ff A H f f t r f l s H w y H r o f f H t H p p f f V H u f i t A H a A h t H o f f p o f i f t s H v H o o f f H o w f i H o f f p f t f v H W H r s H o H G r Y

⚠️ • t ffl Ho fi tsHsu H sh fi v svH or svHspoofish fi H fl shs oufl Hfioth Hpfl HofiHt H o Hsur Hs fi H t yH fiH th otY

ryH youfi H fl r fiH RaWdHy rsSHs oufl H H ptH w yH roff Ht H ppfl fi YH oufl H fl r fiHRdWi Dy rsSH s oufl H H ptH w yH roff Ht H ppfl fi H uflI ssH ofit fuousflyHsup rv s YHt fl r fiH roff Hi Dy rsHofl H fi H ov H fi H p rsofisH wt H r u H p ys fiHV s fisoryHorHff fit fH p fl t shorHfl HoH xp r fi H fi H fiowfl H fiHus Ht sH ppfl fi HofflyHt yH r Hsup rv s HorH v H fiH v fiH fistru tofisHoFlH s Hus H fi H ufl rst fi Ht H z r SH fivoflv YH t fl r fiHff ustHiotpfl yHW t H t H ppfl fi YHt fl fi H fi Hus rHff fit fi fi Hff ustHiotH H rr Houth yH fl r fiHW t outSup rv s ofiY

⚠️ r t r us ⌘ sw t ⌘ oF H t ⌘ o H fl ff fith yH tsH ofitroH fi H offiotr flyhofiH Hp fiH t torY

⚠️ r " z" x kh H ppA fi H fi H tsH ss A Hp rtsH off H oth ur fi H us VH t r H s ouA H H t fiH toH vo Htou fi H t fi H A ff fitsYht A r fiHl ssht fiH i Hy rsko H Hs fAH H pth w yufHl ssH ofit fuouslyH sup rv s Y

⚠️ tr z—” kH t H ppfl fi H sh fiotH fit fi H toH H op r t H yH ff fisHo H fiH xt rf hHsw t fi H v WH su H sh Ht ff rVhor's pr t Hr ff ot H ofitroA A h syst ff Y

sH ppI fi HsH fit fi HtoH hus HfiH ous ofi H fi Hs ff iR ppI tofisSu H skHst FH t fiH r sh fiHs opsHoC sh fi Hot rHwor fi H fiv rohff fitsH rff H ous sH yH fi fitsH fiH ot flsVH ff ot flsW H OH r stH fi Hot rHr s fit fH fiv rohff fitsY

⚠" oHot rhus H shp rff tt HR Y YH t fi Hrooff sSY

⚠️ sH ppfl fi H shfioth or pro ss ofi fhus Yhu oftioth us Ht H ppfl fi Hout oors

⚠️ The appliance must be installed in accordance with the manufacturer's instructions and the local regulations. The installation must be carried out by a qualified person.

⚠️ Before connecting the appliance to the water supply, check that the water pressure is between the values indicated on the appliance data plate. If the water pressure is higher than the maximum value, install a pressure reducer. If the water pressure is lower than the minimum value, check that the water supply is adequate. The appliance must be connected to the water supply using the supplied hose. Check that the hose is not kinked or damaged. The water supply must be turned on slowly to avoid water hammer. Check that all connections are tight and there are no leaks. The appliance must be connected to the electrical supply in accordance with the manufacturer's instructions and the local regulations. The electrical supply must be protected by a suitable fuse or circuit breaker. The appliance must be earthed. Check that the voltage and frequency of the electrical supply match the values indicated on the appliance data plate.

⚠️ Carry out the installation of the appliance in accordance with the manufacturer's instructions and the local regulations.

△ The appliance shall be installed in accordance with the manufacturer's instructions and the local regulations. The installation must be carried out by a qualified person.

⚠️ Before connecting the appliance to the water supply, check that the water pressure is between the values indicated on the appliance data plate. If the water pressure is higher than the maximum value, install a pressure reducer. If the water pressure is lower than the minimum value, check that the water supply is adequate. The appliance must be connected to the water supply using the supplied hose. Check that the hose is not kinked or damaged. The water supply must be turned on slowly to avoid water hammer. Check that all connections are tight and there are no leaks.

⚠️ Do not use the appliance if the power cord or plug is damaged. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person in order to avoid a hazard. Do not operate the appliance with wet hands. Do not immerse the appliance in water or any other liquid. Do not use the appliance near water or in damp places.

⚠️ Before using the appliance, check that the power supply voltage matches the voltage indicated on the appliance data plate. The appliance must be connected to a properly earthed socket.

⚠️ The supply cord must be replaced by the manufacturer, its service agent, or a similarly qualified person in order to avoid a hazard. Do not use the appliance if the supply cord is damaged.

△ The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

The power supply must be connected to a suitable power source. The power supply must be connected to the equipment before connecting to the mains supply. The power supply must be connected to the equipment using the appropriate cable. The power supply must be connected to the equipment in accordance with the instructions. The power supply must be connected to the equipment in a manner that prevents accidental disconnection. The power supply must be connected to the equipment in a way that allows for proper ventilation. The power supply must be connected to the equipment in a way that does not obstruct the operation of the equipment. The power supply must be connected to the equipment in a way that does not damage the equipment. The power supply must be connected to the equipment in a way that does not create a hazard. The power supply must be connected to the equipment in a way that complies with all applicable regulations.

R	áó/c-íktkíktgkiírktviblyaópooíyviěytokíjvind/íícý/kk(íích/kyíkirkíy/keíktgkvíчервлíцрвíčkk/íckkíчервыйíчпрвийííkþryíčtkáíčrtkκ/íft-tetíív/keiýviě/íív/keíɪnkeííρ/(hídva'hí/v/kevk
S	áki kíy/ккиктíy/ккókíy/книýÍkαφéírkvvkíákúkííkvd/íákaúy(íák/vktkíákvkíákvrkíy/киík/фянíбрьлвíkj/v/ííytdíklpríчвеныйíklpríчвеныйíklŋþrpíhkědyíhktdýiá/kk/íákvkeíkví-t/íákvkeíákvkí-/hvtktkgóídikkíákuíkk
T	áovt(gk/()íácv(gkogri)í/ývo(gkɒ/)í/ývo(ciký/)íbypeē(ýkrú)ííjkrkt(h/ɔo)íýpo/(rtoē-/íý)o(k/(pɔ-/í)ikrótáptí-r(ιý/k()íác/v(gk/v)iátov(gkɒ)íáo/v(gkojí)/óá/tɛkv(gko)ííйвал(íйнл)ínoнь(iйнь)íyudki(iρvi)ípo/v/(ιρv/)ííйвій(iерый)ííйвій(iípríй)íkεκ(iýp)íýndký(št dá)íýndký(ιρvá)í-é-(ιýk-t)íáša(gká)ííjkrktk(h/ky//)íáša(gká)íóáša(gkáe)íý/vp(gko)ígiký(σρ/σh)íóáša(gkák)
⊕=E	(toon/gkttkígp/οιν/vtkdtí/γ/крои/vtkdtí/γ/ктои/vtkdt kítrivo/p páoivoí-ιιο/κτ/кинтɔktídyтзеткі/ý/Íšigtəmik/Íž/ú/ížóle(úytmik(ígtóá/gkükij/vkt/vtkei'gtto/gkntk íg/óátk/vtkdíjxöortl/зеoeblíxyutl/зеoebýikvýTKIyTOT KIÍŽVIIyTOTK/íжеотый/зеoebýilj glhtří/зеoebýilj kýjlyo/íbrýižoveá/ytot káížova/ýtot káíI ákg/ýðodígvə/gkøkkí-tov/ρktk/vphkt áigvo/gkökígvo/gkokíí/ku/(tspolávi/go/ígyovk/gkaekk
N	áovtíáoví/ývoí/ývoíbypeēíjɔkrktíydo/íy)o(k/íkrótí-píáo/víástvíáo/ví/óá/tɛkvííйbalípoньbýu ndkniřo/v/íiйвійííйвійíkekýyndkýíyидkýí-é-íóááíjɔkrkt kíćáíóášiv/volgiкуíóášk

Grounding and bonding of the equipment

||

Grounding and bonding of the equipment

Grounding and bonding of the equipment

Grounding and bonding of the equipment

Grounding and bonding of the equipment

Grounding and bonding of the equipment

Grounding and bonding of the equipment

Grounding and bonding of the equipment

Grounding and bonding of the equipment

Grounding and bonding of the equipment

Grounding and bonding of the equipment

Grounding and bonding of the equipment

The equipment must be grounded in accordance with the instructions. The equipment must be grounded in accordance with the applicable regulations. The equipment must be grounded in accordance with the manufacturer's instructions.

If the hob is installed above a drawer or oven, ensure that there is adequate ventilation and that the drawer or oven is not used to store flammable materials.

The manufacturer will not be held liable for any damage resulting from incorrect installation or use of the appliance. Always follow the installation instructions and use the appliance only as described in this manual.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

Empty pots or pots with a thin base

Use pots with a thick base. The base of the pot should be flat and clean. Do not use pots with a rough base, as this may scratch the glass surface. Always place the pot in the center of the cooking zone. Do not use pots that are smaller than the cooking zone. The minimum diameter of the pot base for each cooking zone is indicated in the table below. Using pots that are too small may cause the cooking zone to overheat and damage the hob.

Minimum diameter of pot pan base for the different cooking areas

If the hob is not used properly, the pots may not heat up correctly. Always use pots with a flat and thick base to ensure good heat transfer.

Always use pots that are suitable for the cooking zone. The base of the pot should be flat and clean. Do not use pots with a rough base, as this may scratch the glass surface.

If the pot is not suitable for the cooking zone, the hob may not detect it. Use pots with a flat and thick base to ensure proper operation.

To set the power of the hob

If you have a timer, you can set it to switch off the cooking zone automatically after a certain time. To set the timer, press the "+" or "-" buttons.

Press the "U" button or the "+" and "-" buttons to adjust the power level. The display will show the selected power level.

Press the "#" button to lock the controls.

Press the "U" and "B" buttons simultaneously to switch the hob on or off.

Power levels: 1 = low, 2 = medium, 3 = high, 4 = very high.

Please note: In the cooking zones close to the control panel, it is advisable to keep pots and pans inside the markings (taking both the bottom of the pan and the upper edge into consideration, as this tends to be larger). This prevents excessive overheating of the keypad. When grilling or frying, please use the rear cooking zones wherever possible.

To activate the cooking zones

To deactivate the cooking zones

Press and hold the button to set the time. The display will show the time and the hour will flash. Press the button again to set the minutes. The display will show the time and the minutes will flash. Press the button again to set the seconds. The display will show the time and the seconds will flash. Press the button again to confirm the time.

What is the purpose of the button? It is used to set the time. The button is pressed to select the hours, minutes, and seconds. The display will show the time and the selected value will flash. Press the button to increase the value. Press the button to decrease the value. Press the button to confirm the time.

|| y

Press the button to set the time. The display will show the time and the selected value will flash. Press the button to increase the value. Press the button to decrease the value. Press the button to confirm the time.

The display will show the time and the hour will flash. Press the button to set the hour. The display will show the time and the minutes will flash. Press the button to set the minutes. The display will show the time and the seconds will flash. Press the button to set the seconds.

3 sec " ∥ y ∥ "

The display will show the time and the selected value will flash. Press the button to increase the value. Press the button to decrease the value. Press the button to confirm the time. The display will show the time and the selected value will flash. Press the button to increase the value. Press the button to decrease the value. Press the button to confirm the time.

- : Ⓡ +

The display will show the time and the hour will flash. Press the button to set the hour. The display will show the time and the minutes will flash. Press the button to set the minutes. The display will show the time and the seconds will flash. Press the button to set the seconds.

To activate the timer

The display will show the time and the hour will flash. Press the button to set the hour. The display will show the time and the minutes will flash. Press the button to set the minutes. The display will show the time and the seconds will flash. Press the button to set the seconds. The display will show the time and the selected value will flash. Press the button to increase the value. Press the button to decrease the value. Press the button to confirm the time. The display will show the time and the selected value will flash. Press the button to increase the value. Press the button to decrease the value. Press the button to confirm the time.

To deactivate the timer

The display will show the time and the hour will flash. Press the button to set the hour. The display will show the time and the minutes will flash. Press the button to set the minutes. The display will show the time and the seconds will flash. Press the button to set the seconds. The display will show the time and the selected value will flash. Press the button to increase the value. Press the button to decrease the value. Press the button to confirm the time.

||u

The display will show the time and the selected value will flash. Press the button to increase the value. Press the button to decrease the value. Press the button to confirm the time. The display will show the time and the selected value will flash. Press the button to increase the value. Press the button to decrease the value. Press the button to confirm the time.

The flow of the fluid through the pipe is determined by the pressure difference between the inlet and outlet, and the resistance to flow offered by the pipe's geometry and surface roughness. The flow rate can be calculated using the Darcy-Weisbach equation, which relates the pressure drop to the friction factor, pipe length, diameter, and fluid velocity. The friction factor depends on the Reynolds number and the relative roughness of the pipe. For laminar flow, the friction factor is inversely proportional to the Reynolds number, while for turbulent flow, it is determined from the Moody chart or empirical correlations.

The pressure drop across the pipe can be calculated using the Darcy-Weisbach equation, which is given by: ΔP = f * (L/D) * (ρV^2/2), where f is the friction factor, L is the pipe length, D is the pipe diameter, ρ is the fluid density, and V is the average fluid velocity. This equation is valid for both laminar and turbulent flow, provided the appropriate friction factor is used.

The friction factor f can be determined from the Moody chart, which plots f against the Reynolds number for various relative roughness values. Alternatively, for laminar flow (Re < 2000), f = 64/Re, and for turbulent flow, the Colebrook equation can be used: 1/√f = -2 log10(ε/(3.7D) + 2.51/(Re√f)).

y_u

The pressure drop due to friction in a pipe can be calculated using the Darcy-Weisbach equation, which is a widely used method in fluid mechanics. The equation is: ΔP = f * (L/D) * (ρV^2/2), where f is the friction factor, L is the pipe length, D is the pipe diameter, ρ is the fluid density, and V is the average velocity. The friction factor depends on the Reynolds number and the relative roughness of the pipe, and can be obtained from the Moody chart or empirical correlations.

The pressure drop across the pipe can be calculated using the Darcy-Weisbach equation, which is given by: ΔP = f * (L/D) * (ρV^2/2). The friction factor f can be determined from the Moody chart, which is a plot of f versus the Reynolds number for various relative roughness values. For laminar flow, f = 64/Re, and for turbulent flow, the Colebrook equation is used: 1/√f = -2 log10(ε/(3.7D) + 2.51/(Re√f)).

V	V	V"	R fi t fi H oo fi H xp r fi Hi fi H tsS
ximum/ power	Iw sti	t fi Z soost r	z Hi or+r p fly+ fi r sf i Ho oo lt ff p r tur H tok h sth o IHR or+w t rS or+ or+ r p fy+ ti fi Ho oo fi Hi qu sY
	i HBij hwry fi BH of fi tz Hi or+	owfi fi Ust rt fi HtoH oo W ry fi t p+ roz fillpro u ts/H std o fi fi Y
ighlpower	hiBti	srowfi fi HBIs uté fi HB o fl fi HB r mfl fi	z Hi or+s uté fi Vff fit fi fi H Hi v fly+ o Fh oo fi Hi fi H r mfl fi HR or+ fs ort p ro ho ht ff VH wba+ff fiut sSY
	gIBth	srowfi fi HB1 oo fi HBst w fi HB+ s uté fi H BH r mfl fi	z Hi or+s uté fi Vff fit fi fi H Hi th o fH oo fi Hi fi H r mfl fi HR or+ Hff uff H p ro ho ht ff VH ba+ca+ff fiut sSWpr t fi H ssor sY
ediumlpower	eIBtf	too fi HBist w fi HB+ s uté fi H Bh r mfl fi	z Hi or+st w fi Vff fit fi fi H fitII h o Fh oo fi HR or+ HIlofi Hp ro ho ht ff SYH tr ff fi lp st Y
	dIBle	too fi HBs ff ff r fi HBt fn fi H BH r ff fi	z Hi or+lofi N oo fi Hr p sk+Rr Wls u siHo stsHGs Shwt Hi qu s+R Y Hiw t rH w fi sM rot Vff fi SH r ff fi lp st Y
	cIBld		z Hi or+lofi W oo fi Hr p skRr sst fiH Hi+tr H fillvo+uff Hr Wls u siHo stsHGs S# wt Hi qu sR Y Hiw t rWw fi sM rot Vff fi SY
owlpower	bIBtc	• fit fi HB rost fi HB p fi H oo tw rff HBH r ff fi	z Hi or+so t fi fi H utt rh fuity+ff lt fi fi O of t Wt w fi hsff AHP pro u tsH fi H p fi fustW oo K oo tw rff HR Y Wls u stsoups+ff fi strofi SY
	b		z Hi or+ p fi fustW oo K oo tw rff WH or+ r ff fi Hr sottosh fi H or+ p fi H s rv fi H s shw rff HWt fi hi u tofINSu t fi H ssorySY
erolpowerIf I upportisur			yo Hi fi+st fi W yHorloF+ff o HRposs fi Hi fi No W oo fi Hr s u fiH tk fi t H y+ fiK“y”SY

• Do not use the appliance if the cooking zones are not switched off and the residual heat indicator "H" is not displayed.

Important

• If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. • Do not use the appliance if the surface is cracked or damaged. • Do not place hot pans on the control panel. • Do not place heavy objects on the hob. • Do not use the hob as a work surface. • Do not use the hob if it is damaged or has a visible crack.

• Do not use steam cleaners to clean the hob. • Do not place metal objects such as knives, forks, spoons, or lids on the hob surface as they can become hot. • Do not use the hob if it is damaged or has a visible crack. • Do not place flammable materials on or near the hob. • Do not use the hob to heat the room.

Z

• Do not connect the appliance to a power supply that is not properly earthed. • If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. • Do not pull the power supply cord to disconnect the appliance.

• Do not use the appliance if the glass surface is cracked or damaged. Switch off the appliance to avoid the possibility of electric shock.

y " "	" " z " y "
wavb	too wr ls t t h utt ts fiot off p t h wt hr qu st Hop r tofi	H oo wr k shiotw fllpost ofi Hofi t H oo fi Hzofi Wori t sfiot off p t h w t Hofi Koriff or H oo fi Hzofi sy	ér ss4-fiz-FH uttofiTw Htohr ff ov H t H wavbh o h fi fr stor lt t h ufi tofi itylo it H oo fi Hzofi H fiH tryftolus ht H oo wr i wt t H Fr fit oo fi Hzofi WorH us H F r fitd oo w r ?
wavh	rofi hpow rh or h ofifi tofiH h pow	rh suppfyH ofifi tofiH sfiotx tfyH sl fi t H fn “v-vt zr -lt -” vt z-“pr rp ?	r fiustt t H pow rh suppfyH ofifi tofiH or fi H tohl “v-vt zr -lt -” vt z-“pr rp ?
wavr	f ofitrohp fi hsw t sloFl us Ho x ss v fyH ht ff pr tur sy	f fit rf hft ff p r tur ho h fi trofi H p rtsH sitoo! ?	th orit H o htoI ooH owfiH or hus fi H tl fi?
wavj	H oo fi Hzofi h turfisHoFi w fiH t ff p r tur sh r htooH ?	h fit rf hft ff p r tur ho h fi trofi H p rtsH sitoo! ?	thufit hft H oo fi H r H sht oofl hoF or hus fi h tl fi?
wavchwavehwavghwavi hwavt hwbbvhwcvbihwgvbihwgvdWhvf hwwhvg	u s ofifi tlt H o h roff ht hpow rlsupplyHth h wls ofi sit fiIr ofifi tt t o htoH hpow rlsupplyZ ht hpro ff hp rs sts/H fiHt fs rv H fitr h fi Ksp yit H rrorH o ht dd pp rshofiH t spf yH
hv [when the hob is off]	H o H o sfiotsw t H thupH ufi tofisH ofiot off hofiH	uv• -H• -uvhofi?	woflowH t H fistru tofisH fit t H “uv• -H • -uv“hp r rp ?
Y HH: 0 → -	H o H o Sh fiod flowH sp fiH ufi tofitoH t tv t ?	tpow rIr uI torH lff tsit Hpow rH fl v flsH fit or fi kw t ht hff x ff uff Hv fu ls tl onlt H o ?	hp r rp H“éow riff fi ff fit“?
Y HHP → S [Power level lower than level requested]	H o h utoff t flys tsH lff fi ff uff H pow rH v fhtoh fisur lt tlt H oo fi H zofi H fiH Hus ?	tpow rIr uI torH lff tsit Hpow rH fl v flsH fit or fi kw t ht hff x ff uff Hv fu ls tl onlt H o ?	hp r rp H“éow riff fi ff fit“?

|| " || || y

• Do not use the appliance if the glass surface is cracked or damaged. Switch off the appliance to avoid the possibility of electric shock. Do not use the appliance if the power supply cord is damaged.

• Do not use the appliance if the glass surface is cracked or damaged. Switch off the appliance to avoid the possibility of electric shock.

AFTER-SALES SERVICE

To receive complete assistance, please register your product on www.hotpoint.eu/register.

BEFORE CALLING THE AFTER-SALES SERVICE:

1. See if you can solve the problem by yourself with the help of the TROUBLESHOOTING suggestions.
2. Switch the appliance off and back on again to see if the fault persists.

IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN TOUCH WITH THE NEAREST AFTER-SALES SERVICE.

To receive assistance, call the number shown on the warranty booklet or follow the website's instructions on www.hotpoint.eu.

When contacting our Client After sales service, always specify:

• a brief description of the fault; • the type and exact model of the appliance;

- the serial number (number after the word SN on the rating plate located under the appliance). The serial number is also indicated in the documentation;

• your full address;
• your telephone number.

If any repairs are required, please contact an authorized after-sales service (to guarantee that original spare parts will be used and repairs carried out correctly).

In case of installation not over a built-in oven, you can call the After Sales Service to buy the divider kit C00628720 (cooktop 60 and 65 cm) or C00628721 (cooktop 77 cm). If you prefer not to buy the divider kit please ensure that a separator is installed according to the installation instructions.