TF517 LP - Dishwasher BARTSCHER - Free user manual and instructions
Find the device manual for free TF517 LP BARTSCHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Undercounter Dishwasher |
| Model | TF517 LP |
| Brand | Bartscher |
| Dimensions (W x D x H) | 600 x 600 x 820 mm |
| Weight | 45 kg |
| Power Supply | 230 V, 50 Hz, 2.8 kW |
| Water Connection | Cold water, 3/4" hose |
| Capacity | 30 racks per hour |
| Water Consumption | 3.5 L per cycle |
| Noise Level | 55 dB(A) |
| Programs | Intensive, Eco, Rapid, Glass |
| Display | Digital with LED indicators |
| Heating System | Boiler and wash pump with heater |
| Self-Cleaning Function | Yes, automatic cleaning cycle |
| Filter System | Self-cleaning fine filter |
| Construction Material | Stainless steel interior and exterior |
| Door Type | Self-closing, spring-assisted |
| Safety Features | Overheating protection, door safety switch, anti-flood system |
| Maintenance | Clean filters daily, descale monthly |
| Spare Parts Availability | Yes, through Bartscher service |
| Repairability Index | 8.5 / 10 |
| Intended Use | Commercial kitchens, restaurants, bars |
Frequently Asked Questions - TF517 LP BARTSCHER
How do I install the Bartscher TF517 LP dishwasher?
Ensure the dishwasher is placed on a level surface. Connect the water supply to a 3/4' cold water line using the provided hose. Plug the unit into a grounded 230 V outlet. Adjust the feet to stabilize. Run a test cycle before first use.
What detergent should I use?
Use a commercial dishwasher detergent suitable for hard water. For best results, combine with a rinse aid. Do not use household dish soap as it creates excess foam.
How do I clean the dishwasher filters?
Turn off and unplug the dishwasher. Remove the lower spray arm, then pull out the filter assembly. Rinse under running water to remove debris. Use a soft brush for stubborn deposits. Reassemble and run a rinse cycle.
Why isn't the dishwasher drying properly?
Check if rinse aid is full. Ensure the final rinse temperature is at least 70°C. Verify that the heating element is not covered by lime scale. Clean the wash arms and filters.
Can I use the TF517 LP for glassware?
Yes, select the Glass program which uses lower temperature and gentle spray. Use appropriate glass racks to prevent breakage. Ensure rinse aid is added for spotless results.
What does error code E1 mean?
Error E1 indicates a water intake fault. Check that the water supply is open and the hose is not kinked. Also inspect the water inlet filter for blockages. If the problem persists, contact service.
How often should I descale the dishwasher?
In areas with hard water, descale every 1-3 months. Use a commercial descaling agent. Run the descaling cycle according to the manual. Rinse thoroughly afterward.
The dishwasher is leaking water from the bottom. What should I do?
Turn off the power and water supply. Check the door gasket for damage or debris. Inspect all hose connections. Ensure the wastewater hose is not clogged. If the leak continues, call a technician.
What is the noise level of the TF517 LP?
The noise level is approximately 55 dB(A), which is comparable to a normal conversation. Ensure the machine is level and not touching adjacent surfaces to minimize vibration.
How do I reset the dishwasher to factory settings?
Press and hold the Start/Stop button for 5 seconds until the display shows 'rES'. Press Start again to confirm. The machine will restart with default settings. Note that this clears all custom programs.
User questions about TF517 LP BARTSCHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual TF517 LP - BARTSCHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TF517 LP by BARTSCHER.