1502A - Temperature Controller FLUKE - Free user manual and instructions
Find the device manual for free 1502A FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Temperature Controller / Thermometer Readout |
| Brand | Fluke |
| Model | 1502A |
| Measurement Range | -200°C to 962°C (with suitable PRT) |
| Accuracy | ±0.01°C at 0°C |
| Resolution | 0.001°C |
| Input Type | 4-wire platinum resistance thermometer (PRT) |
| Display | LCD with backlight |
| Power Supply | 100-240 VAC, 50/60 Hz, 15 VA max |
| Dimensions | 88 mm x 178 mm x 238 mm (H x W x D) |
| Weight | 0.9 kg (2 lb) |
| Interfaces | RS-232 standard; GPIB optional |
| Functions | Temperature measurement, data logging, calibration, scan mode |
| Safety | Overvoltage protection, built-in fuse |
| Maintenance | Clean exterior with a damp cloth; do not use solvents |
| Spare Parts | AC power cord, RS-232 cable, probe connectors |
| Repairability | Calibration and service by qualified technicians only |
| Certifications | CE, NIST traceable calibration included |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
Frequently Asked Questions - 1502A FLUKE
How do I connect a PRT probe to the Fluke 1502A?
Connect the probe using the 4-wire input terminals. Ensure the probe is compatible with the 1502A's range and accuracy.Use only platinum resistance thermometers (PRTs) with a nominal resistance of 100 ohms.
What is the maximum temperature the 1502A can measure?
The 1502A can measure from -200°C to 962°C with an appropriate PRT probe. The upper limit depends on the probe's rating.
How do I calibrate the Fluke 1502A?
The 1502A can be re-calibrated via the front panel or remote interface using known resistance standards. Refer to the manual for full calibration procedures. Regular calibration is recommended every 12 months.
Can I use the 1502A for data logging?
Yes, the 1502A supports data logging via its RS-232 interface. You can log temperature readings at programmed intervals using the LOG function and download data to a PC.
What are the RS-232 commands supported?
Commands include IDN? (identification), FETCh? (fetch reading), CONFigure, and SYSTem:ERROR?. A full list is in the programming manual.
Does the 1502A have a battery backup?
No internal battery for continuous operation. However, the unit retains calibration and configuration settings in non-volatile memory even when powered off.
How do I clean the 1502A?
Disconnect power and clean the exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or immerse the unit in liquid.
What should I do if the display shows 'Overload'?
An 'Overload' indicates the input signal exceeds the measurement range. Check your probe connection, ensure it is within the -200°C to 962°C range, and verify the probe is not shorted or open.
Can I use the 1502A with a thermocouple?
No, the 1502A is designed exclusively for 4-wire platinum resistance thermometers (PRTs). For thermocouple measurements, use a different instrument like the Fluke 1524.
Where can I download the manual for the 1502A?
The user manual and programming guide are available for free on notice-facile.com in PDF format. Search for Fluke 1502A to download.
User questions about 1502A FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Temperature Controller in PDF format for free! Find your manual 1502A - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 1502A by FLUKE.
USER MANUAL 1502A FLUKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLUKE
Model : 1502A
Category : Temperature Controller