9173 - Temperature Controller FLUKE - Free user manual and instructions
Find the device manual for free 9173 FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Temperature Calibrator (Dry-Well) |
| Brand | Fluke |
| Model | 9173 |
| Temperature Range | -25 °C to 140 °C |
| Accuracy | ±0.25 °C at 0 °C |
| Stability | ±0.02 °C |
| Display | LCD with backlight, 4-digit |
| Interfaces | RS-232, USB (optional IEEE-488) |
| Dimensions (H x W x D) | 320 x 170 x 230 mm |
| Weight | 8.5 kg |
| Power Supply | 100-240 VAC, 50/60 Hz, 200 VA max |
| Main Functions | Dry-well calibration, 3-zone heating, programmable ramping and soaking |
| Maintenance & Cleaning | Wipe with damp cloth; use mild detergent; avoid solvents |
| Safety Features | Over-temperature protection, fused power entry |
| Spare Parts & Repairability | Replaceable heating block, power cord, fuses; user-serviceable |
| General Information | Rugged design for field and lab use; CE certified |
Frequently Asked Questions - 9173 FLUKE
How do I perform a calibration with the Fluke 9173?
Insert a reference probe into the well, set the desired temperature, and compare the reading. Use the SET and SHIFT keys to adjust setpoints. For full procedure, consult the manual.
What is the warm-up time for the Fluke 9173?
The warm-up time is typically 15 minutes to reach stability within ±0.02 °C for most setpoints. Allow additional time for extreme temperatures.
How to set a temperature setpoint?
Press the SET key, use the arrow keys to change the value, and press ENTER. The unit will ramp to the setpoint automatically.
Can I use the instrument with a PC?
Yes, the Fluke 9173 has RS-232 and USB interfaces. Use Fluke's software or standard commands to control and log data.
What is the recommended calibration interval?
Fluke recommends a 12-month calibration interval to maintain accuracy. Annual calibration by an accredited lab is advised.
How to clean the instrument?
Disconnect power. Use a damp cloth with mild soap. Do not use solvents or abrasive cleaners. Avoid moisture entering the vents.
What does the 'Err' message mean?
An 'Err' message indicates a sensor fault or overtemperature condition. Check the probe connection and ensure the unit is not exceeding limits. Refer to manual for codes.
How to replace a fuse?
Disconnect power. Locate the fuse holder near the power inlet. Remove the cap and replace with a 2A, 250V slow-blow fuse of the same type.
Is the instrument CE certified?
Yes, the Fluke 9173 carries CE marking, complying with relevant EU directives for safety and electromagnetic compatibility.
How to transport the device?
Use the original packaging or a sturdy case. Remove the well insert and secure the unit. Avoid dropping or subjecting to shocks during transport.
User questions about 9173 FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Temperature Controller in PDF format for free! Find your manual 9173 - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9173 by FLUKE.
USER MANUAL 9173 FLUKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLUKE
Model : 9173
Category : Temperature Controller