VW942HN - Dishwasher ETNA - Free user manual and instructions
Find the device manual for free VW942HN ETNA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Etna |
| Model | VW942HN |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | 45 kg |
| Energy Efficiency Class | A+ |
| Noise Level | 49 dB(A) |
| Number of Place Settings | 12 |
| Number of Programs | 6 |
| Programs | Eco, Intensive, Normal, Quick, Soak, Glass |
| Water Consumption per Cycle | 12 L (Eco) |
| Energy Consumption per Cycle | 1.05 kWh (Eco) |
| Drying Performance | Condensation drying |
| Safety Features | Child lock, overflow protection, anti-leak system |
| Control Type | Electronic buttons + display |
| Adjustable Rinse Aid Dispenser | Yes |
| Salt Dispenser | Yes |
| Self-Cleaning Filter | Yes |
| Delay Start | Up to 24 hours |
| Power Supply | 220-240 V / 50 Hz |
| Cutlery Basket | Yes, removable |
| Retractable Door | No |
Frequently Asked Questions - VW942HN ETNA
How do I install the dishwasher?
Ensure the dishwasher is placed on a level surface. Connect the water supply hose to a cold water tap (3/4 inch thread) and the drain hose to a suitable drain. Plug the power cord into a grounded outlet. Adjust the feet to level the appliance.
What do the error codes mean?
Common error codes: E1 (water inlet failure), E4 (overflow), E8 (heating element problem). Consult the manual for a full list. Reset by turning off and on after resolving the issue.
How often should I clean the filter?
Clean the filter after every 10-15 cycles to prevent clogging. Remove the lower spray arm, then twist and lift out the filter assembly. Rinse under running water and replace.
Why is the dishwasher not starting?
Check that the door is fully closed and latched. Ensure the child lock is deactivated and the power cord is plugged in. Verify water supply is turned on. Try pressing and holding the Start button for 3 seconds.
How do I add salt and rinse aid?
Open the salt reservoir cap (usually at the bottom of the tub) and fill with dishwasher salt until full. For rinse aid, open the dispenser on the inside of the door and pour until the indicator turns dark. Adjust settings via the control panel.
What detergent should I use?
Use dishwasher detergent (powder, gel, or tablets). For best results, use a detergent with rinse aid and salt for hard water. Place detergent in the main compartment and close the lid.
How do I clean the spray arms?
Remove the upper and lower spray arms by unscrewing or unclipping. Soak in warm soapy water, use a toothpick to clear clogged holes, rinse and reattach securely.
What is the maximum load capacity?
The dishwasher can hold up to 12 place settings. Load plates facing inward, cups on the top rack, and cutlery in the basket. Do not overload to ensure effective cleaning.
How do I reduce noise during operation?
Ensure the dishwasher is level and not touching surrounding cabinets. Use the night cycle if available. Check that dishes are loaded securely to avoid rattling.
Where can I find spare parts?
Spare parts like filters, spray arms, and racks can be ordered online from Etna's official website or authorized dealers. Use the model number VW942HN for compatibility.
User questions about VW942HN ETNA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual VW942HN - ETNA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VW942HN by ETNA.
USER MANUAL VW942HN ETNA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ETNA
Model : VW942HN
Category : Dishwasher