ETNA

VW244HN - Dishwasher ETNA - Free user manual and instructions

Find the device manual for free VW244HN ETNA in PDF.

📄 35 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ETNA VW244HN - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeFreestanding Dishwasher
BrandETNA
ModelVW244HN
Energy ClassA++
Place Settings12
Noise Level44 dB(A)
Annual Energy Consumption260 kWh/year
Annual Water Consumption2800 L/year
Number of Programs6
ProgramsEco, Intensive, Daily, Quick, Glass, Rinse
Drying SystemCondensation drying
Height Adjustable Upper BasketYes
Cutlery BasketYes, with removable top tray
Delay Start1-24 hours
Water Protection SystemAquaStop
Dimension (HxWxD)845 x 600 x 600 mm
Weight42 kg
Power Consumption (Standby)0.5 W
Voltage220-240 V, 50 Hz
Water ConnectionCold water only
Salt and Rinse Aid IndicatorYes
Self-Cleaning FilterYes

Frequently Asked Questions - VW244HN ETNA

How do I install the ETNA VW244HN dishwasher?
Refer to the user manual for detailed installation steps. Ensure the appliance is level, water and electrical connections are correct, and the inlet hose is not twisted. Use the provided mounting brackets for built-in models.
What is the recommended detergent for this dishwasher?
Use a dishwasher detergent specially formulated for automatic dishwashers (powder, gel, or tablets). For best results, use a detergent with rinse aid and salt in hard water areas.
How do I clean the filter of the ETNA VW244HN?
Turn off and unplug the dishwasher. Remove the lower rack. Twist the coarse filter (upper part) counterclockwise and lift out. Remove the fine filter (lower part). Rinse both under running water. Reassemble and ensure the filter is properly seated.
What should I do if the dishwasher does not start?
Check that the door is closed properly, the appliance is plugged in, and the circuit breaker has not tripped. Ensure the water supply is turned on. If the problem persists, consult the troubleshooting section of the manual.
How can I prevent spots on dishes?
Use a rinse aid to improve drying and prevent spots. Adjust the rinse aid dosage according to water hardness. Also, ensure the salt reservoir is filled if your water is hard.
What is the energy efficiency class of the ETNA VW244HN?
The ETNA VW244HN has an energy efficiency class of A++, which means it is highly energy efficient, consuming around 260 kWh per year under standard usage.
How do I set the delayed start?
Press the 'Delay' button repeatedly to select the desired delay time (from 1 to 24 hours). Close the door and press Start. The dishwasher will begin the cycle after the set delay.
Why is the dishwasher noisy?
Check if the dishwasher is level. Ensure dishes are loaded securely and not touching each other. A rattling noise may be from small items falling. If the noise is unusual, contact service.
Can I use the dishwasher with half load?
Yes, the ETNA VW244HN has a half-load program or a sensor that adjusts water and energy use for smaller loads. Select the appropriate program if available.
What does the AquaStop system do?
AquaStop is a safety feature that prevents water leaks. If a leak is detected, the system automatically shuts off the water supply and alarms. This protects your home from water damage.

User questions about VW244HN ETNA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Dishwasher in PDF format for free! Find your manual VW244HN - ETNA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VW244HN by ETNA.

USER MANUAL VW244HN ETNA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ETNA

Model : VW244HN

Category : Dishwasher