HD-ET09 - Heating Infiniton - Free user manual and instructions
Find the device manual for free HD-ET09 Infiniton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Fan Heater |
| Brand | Infiniton |
| Model | HD-ET09 |
| Heating Power | 2000 W |
| Number of Heat Settings | 2 (1000 W / 2000 W) |
| Fan Only Mode | Yes |
| Thermostat | Adjustable |
| Voltage | 220-240 V ~ 50/60 Hz |
| Dimensions (W x H x D) | 20 x 25 x 15 cm |
| Weight | 1.5 kg |
| Cord Length | 1.5 m |
| Safety Features | Overheat protection, tip-over switch |
| Housing Material | Plastic |
| Cleaning | Wipe with dry cloth; do not use water |
| Spare Parts Availability | Contact Infiniton service |
| Repairability | Repairable by qualified technician |
Frequently Asked Questions - HD-ET09 Infiniton
How do I adjust the thermostat on the HD-ET09?
Turn the thermostat dial clockwise to increase the desired room temperature. The heater will cycle on and off to maintain the set temperature.
Can I use the fan only function in summer?
Yes, set the heating power switch to the fan-only position (usually marked with a fan icon) to use the device as a simple fan without heating.
What does the tip-over switch do?
The tip-over switch automatically turns off the heater if it is accidentally knocked over, preventing fire hazards.
How do I clean the heater?
Unplug the heater and wait for it to cool down. Wipe the exterior with a soft, dry cloth. Do not use water, liquids, or abrasive cleaners.
Is the HD-ET09 suitable for bathroom use?
No, this heater is not designed for bathrooms or damp environments. It should only be used in dry indoor areas.
What is the recommended room size for this heater?
The HD-ET09 is suitable for small to medium rooms up to approximately 20 square meters, depending on insulation.
Why does the heater turn off by itself?
The heater may turn off due to the thermostat reaching the set temperature, or due to overheat protection. Check if the air intake is blocked or if the unit has tipped over.
Can I leave the heater unattended overnight?
It is not recommended to leave any fan heater unattended for extended periods. Turn it off when you leave the room or go to sleep.
How do I reset the overheat protection?
Unplug the heater, allow it to cool for 10-15 minutes, then plug it back in. The protection will reset automatically.
Where can I find spare parts for the HD-ET09?
Contact Infiniton customer service or visit their official website. Use the model number HD-ET09 to identify compatible parts.
User questions about HD-ET09 Infiniton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual HD-ET09 - Infiniton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HD-ET09 by Infiniton.