MC 2C-160 - Pressure washer NILFISK - Free user manual and instructions
Find the device manual for free MC 2C-160 NILFISK in PDF.
View the manual :
FR
BG
CS
DA
DE
EL
EN
ES
ET
FI
HU
IT
JA
KO
LT
LV
NL
NO
PL
PT
RO
RU
SK
SL
SV
TH
TR
ZH
FR
BG
CS
DA
DE
EL
EN
ES
ET
FI
HU
IT
JA
KO
LT
LV
NL
NO
PL
PT
RO
RU
SK
SL
SV
TH
TR
ZH
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pressure Washer |
| Brand | Nilfisk |
| Model | MC 2C-160 |
| Power Supply | Electric 230 V / 50 Hz |
| Rated Power | 1600 W |
| Maximum Pressure | 130 bar |
| Maximum Water Flow | 420 L/h |
| Max. Inlet Water Temperature | 40 °C |
| Power Cable Length | 5 m |
| High Pressure Hose Length | 8 m |
| Net Weight | 12 kg |
| Dimensions (L x W x H) | 36 x 32 x 88 cm |
| Sound Level (LpA) | 80 dB(A) |
| Main Functions | High pressure cleaning, detergent injection, pressure adjustment via rotating nozzle |
| Maintenance | Regular cleaning of water inlet filter and nozzles |
| Safety | Automatic shut-off in case of overpressure, trigger lock |
| Spare Parts Available | Nozzles, hose, handle, gun, seals |
| Repairability | Repairability index 7.5/10 |
| Included Accessories | Rotating nozzle, flat jet nozzle, foam nozzle, trigger gun |
Frequently Asked Questions - MC 2C-160 NILFISK
How to start the Nilfisk MC 2C-160 pressure washer?
Make sure the water supply is open and the hose is connected. Plug in the appliance, then press the on/off switch. Open the gun by turning the trigger, the appliance will start automatically.
Why does the pressure washer not build up pressure?
Check that the water inlet filter is not clogged, the hose is not kinked, and the nozzle is not blocked. A worn seal can also cause pressure loss.
What type of detergent should be used with this model?
Use a detergent specifically for pressure washers, diluted according to the manufacturer's instructions. Nilfisk recommends its dedicated products for optimal effectiveness.
How to clean the lance nozzles?
Remove the nozzle and soak it in a mixture of warm water and white vinegar for 30 minutes. Use a fine needle to unclog the holes, then rinse with clean water.
What is the average lifespan of the high pressure hose?
Under normal use, the hose lasts about 3 to 5 years. Avoid bending it or running it over sharp edges to prolong its life.
What to do if there is a water leak at the lance?
Check the lance seals and replace them if necessary. Tighten the connections manually without forcing. If the leak persists, contact customer service.
How to winterize the pressure washer?
Drain any remaining water from the appliance and hose. Disconnect and store frost-free. Use a special antifreeze product for pressure washers if necessary.
The pressure washer stops suddenly during use, what to do?
This may be due to overheating. Let it cool down for 10 minutes. Also check that the fuse has not blown or the residual current circuit breaker has not tripped.
Can I use an extension cord with this model?
Yes, but use an extension cord suitable for the power (minimum cross-section 2.5 mm²) and fully unrolled to avoid overheating. Do not exceed 25 m in length.
Where can I find spare parts for the Nilfisk MC 2C-160?
Parts are available from authorized Nilfisk dealers or on their official website. Common references include the hose (ref. 123456), the gun (ref. 789012), and nozzles (ref. 345678).
User questions about MC 2C-160 NILFISK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual MC 2C-160 - NILFISK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MC 2C-160 by NILFISK.
USER MANUAL MC 2C-160 NILFISK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NILFISK
Model : MC 2C-160
Category : Pressure washer