HMIPW-DRAP - Smart Home Homematic IP - Free user manual and instructions
Find the device manual for free HMIPW-DRAP Homematic IP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wired Door/Window Contact |
| Dimensions (W x H x D) | 70 x 30 x 20 mm |
| Weight | 35 g |
| Power Supply | 3V DC via wired connection (e.g., Homematic IP bus) |
| Operating Voltage | 24V DC (typical bus) |
| Power Consumption | < 0.5 W |
| Wireless Protocol | Homematic IP (868 MHz) |
| Range | Up to 100 m (free field) |
| Main Functions | Detects door/window open/close status, sends events to Homematic IP central unit |
| Maintenance & Cleaning | Clean with a dry, soft cloth; avoid liquids |
| Safety | Low voltage device, safe for indoor use |
| Spare Parts & Repairability | No user-serviceable parts; contact manufacturer for repair |
| General Information | Compatible with Homematic IP system requires a central unit (e.g., Access Point) |
Frequently Asked Questions - HMIPW-DRAP Homematic IP
How do I connect the HMIPW-DRAP to my Homematic IP system?
Connect the device to the Homematic IP wired bus using the provided terminals. Then, follow the pairing procedure in the Homematic IP app: select 'Add Device' and scan the QR code on the device.
What is the operating voltage of the HMIPW-DRAP?
The device operates on 24V DC supplied via the Homematic IP wired bus.
Can I use the HMIPW-DRAP outdoors?
No, the HMIPW-DRAP is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the device.
How do I mount the HMIPW-DRAP on a door or window?
Mount the sensor on the frame and the magnet on the moving part. Align the marks on the sensor and magnet (gap ≤ 10 mm). Use the included adhesive tape or screws.
What indicators does the HMIPW-DRAP have?
The device has a small LED that flashes briefly during pairing and when the door/window status changes. It also supports status feedback via the app.
How do I reset the HMIPW-DRAP to factory settings?
Press and hold the pairing button (inside the device) for 4 seconds until the LED blinks rapidly. Release and the device resets.
What is the maximum cable length for the wired connection?
The total bus cable length should not exceed 100 meters to ensure reliable communication.
Can I integrate the HMIPW-DRAP with other smart home systems?
It is exclusively compatible with the Homematic IP ecosystem. Integration with other systems requires a gateway or bridge.
Why is my HMIPW-DRAP not detected by the app?
Ensure the device is powered via the bus and within range. Verify that the central unit (Access Point) is online. Try a factory reset and re-pair.
What does the LED flash pattern mean?
A slow blink indicates pairing mode. A fast blink signals a successful connection or a device reset. A steady on (rare) may indicate an error; consult the manual.
User questions about HMIPW-DRAP Homematic IP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smart Home in PDF format for free! Find your manual HMIPW-DRAP - Homematic IP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HMIPW-DRAP by Homematic IP.
USER MANUAL HMIPW-DRAP Homematic IP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Homematic IP
Model : HMIPW-DRAP
Category : Smart Home