HM-RC-19 - Smart Home Homematic IP - Free user manual and instructions
Find the device manual for free HM-RC-19 Homematic IP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smart Home Remote Control |
| Model | HM-RC-19 |
| Brand | Homematic IP |
| Dimensions (approx.) | 80 x 80 x 20 mm |
| Weight (approx.) | 50 g |
| Power Supply | 2 x AAA batteries (not included) |
| Wireless Protocol | Homematic IP, 868.3 MHz |
| Range (free field) | Up to 200 m |
| Functions | Control heating, lighting, blinds, and other Homematic IP devices; 4 buttons for direct commands |
| Mounting | Wall mount (included) or table stand |
| Maintenance & Cleaning | Clean with a soft, dry cloth. Do not use solvents. |
| Safety | Designed for indoor use only. Low voltage device. No user-serviceable parts inside. |
| Spare Parts & Repairability | Batteries and wall mount plate available separately. Device not repairable by user. |
| General Information | Compatible with Homematic IP smart home system. Requires a Homematic IP Access Point. |
Frequently Asked Questions - HM-RC-19 Homematic IP
How do I pair the HM-RC-19 with the Homematic IP system?
Press and hold the pairing button (located inside the battery compartment) for 3 seconds until the LED flashes. Then enable pairing mode in the Homematic IP app.
What type of batteries does the HM-RC-19 use?
It uses 2 AAA alkaline batteries. Rechargeable batteries (Ni-MH) are also supported.
How can I reset the HM-RC-19 to factory settings?
Remove the batteries, press and hold any button, reinsert batteries while holding the button. The LED will blink rapidly to confirm reset.
What is the wireless range of the HM-RC-19?
The range is up to 200 meters in free field. Indoors, range may be reduced depending on walls and obstacles.
Can I mount the HM-RC-19 on a wall?
Yes, a wall mount plate is included. Screw the plate to the wall and snap the remote onto it.
How do I change the battery?
Slide off the back cover, replace the two AAA batteries with correct polarity, and replace the cover.
The remote is not responding. What should I do?
Check if the batteries are installed correctly and have enough charge. If still not working, try re-pairing the device with the access point.
How many devices can I control with the HM-RC-19?
You can assign up to 4 different functions to the buttons via the Homematic IP app. The number of controllable devices is limited only by system capacity.
What does the LED on the remote indicate?
When pressing a button, the LED lights up briefly to confirm the command. Flashing indicates pairing mode or low battery.
Is the HM-RC-19 waterproof?
No, it is designed for indoor use only. Keep away from moisture and extreme temperatures.
User questions about HM-RC-19 Homematic IP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smart Home in PDF format for free! Find your manual HM-RC-19 - Homematic IP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HM-RC-19 by Homematic IP.
USER MANUAL HM-RC-19 Homematic IP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Homematic IP
Model : HM-RC-19
Category : Smart Home