SCS-46-JET - Saw STANLEY - Free user manual and instructions
Find the device manual for free SCS-46-JET STANLEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | STANLEY |
| Model | SCS-46-JET |
| Product type | Jigsaw |
| Dimensions (L × l × H) | 26 × 8 × 20 cm |
| Weight | 2.2 kg |
| Power supply | 220-240 V, 50 Hz, 600 W |
| Variable speed | 500 to 3000 strokes/min |
| Max. cutting capacity (wood) | 80 mm |
| Max. cutting capacity (metal) | 10 mm |
| Bevel cut | 0° to 45° |
| Laser guide | Yes, integrated |
| Dust blower | Yes |
| Vacuum cleaner connection | Yes, 35 mm diameter |
| Shaft lock for blade change | Yes |
| Lockable switch | Yes |
| Maintenance and cleaning | Clean with a dry cloth, lubricate the guides periodically |
| Spare parts and repairability | Blades, sole plate, laser guide, motor brushes available |
| Warranty | 2 years |
| Package contents | Jigsaw, 3 blades, hex key, parallel guide, carrying case |
Frequently Asked Questions - SCS-46-JET STANLEY
How to change the blade of the SCS-46-JET jigsaw?
Unplug the tool. Use the supplied hex key to loosen the locking screw. Remove the old blade and insert the new one, making sure the teeth are facing forward. Tighten the screw firmly.
What type of blade to use for cutting metal?
Use a special metal blade with fine teeth (e.g., TPI 14-18). The speed should be reduced to avoid overheating.
How to adjust the bevel cut?
Loosen the sole plate adjustment knob, tilt the sole plate to the desired angle (0° to 45°), then retighten the knob. Check the angle with a protractor if necessary.
What to do if the saw does not start?
Check that the power cord is plugged in and the outlet works. Check the condition of the carbon brushes. If the problem persists, contact after-sales service.
How to use the laser guide?
The laser guide turns on automatically when the tool is turned on. It projects a red line on the workpiece to indicate the cutting path. Adjust the beam using the adjustment screw if necessary.
What safety precautions to observe?
Always wear safety glasses and a dust mask. Do not wear loose clothing. Hold the workpiece firmly. Unplug the tool before any adjustment or blade change.
How to clean the saw after use?
Unplug the tool. Wipe the housing with a damp cloth and dry. Use a brush to remove sawdust from the ventilation slots. Never immerse the saw in water.
Can the saw cut tiles?
No, this jigsaw is not designed for tiles. Use a tile cutter or an appropriate grinder.
Where to find replacement blades?
Replacement blades are available in hardware stores or online. Refer to the manual for compatible dimensions (T-shank or U-shank).
How to avoid excessive vibrations?
Make sure the blade is tight and suitable for the material. Use a guide to hold the workpiece stable. Too high speed can also increase vibrations.
User questions about SCS-46-JET STANLEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual SCS-46-JET - STANLEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SCS-46-JET by STANLEY.
USER MANUAL SCS-46-JET STANLEY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STANLEY
Model : SCS-46-JET
Category : Saw