R-VG400PRU8 - Fridge HITACHI - Free user manual and instructions
Find the device manual for free R-VG400PRU8 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Refrigerator |
| Brand | Hitachi |
| Model | R-VG400PRU8 |
| Total Capacity | 400 Liters |
| Fridge Capacity | 280 Liters |
| Freezer Capacity | 120 Liters |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 250 kWh/year |
| Power Supply | 220-240 V ~ 50 Hz |
| Refrigerant | R600a |
| Dimensions (H x W x D) | 1760 x 700 x 700 mm |
| Weight | 65 kg |
| Noise Level | 42 dB(A) |
| Climate Class | SN-T |
| Defrost Type | Automatic (No Frost) |
| Temperature Control | Electronic |
| Interior Lighting | LED |
| Shelves | Tempered glass |
| Door Alarm | Yes |
| Warranty | 2 years |
Frequently Asked Questions - R-VG400PRU8 HITACHI
How do I set the temperature on my Hitachi R-VG400PRU8?
Press the Temperature Control button repeatedly to cycle through settings. The recommended fridge temperature is 4°C and freezer -18°C.
Why is water pooling inside the fridge?
Check if the drain hole is blocked. Clean it with a pipe cleaner or warm water. Also ensure the door seals are not damaged.
How do I defrost the freezer?
This model features No Frost, so manual defrosting is not required. If ice builds up, check the door seal or call service.
Why is the fridge not cooling?
Ensure the power cord is plugged in. Check the thermostat setting. If still not cooling, the compressor may be faulty; contact Hitachi support.
How to change the interior light bulb?
Unplug the fridge. Remove the light cover by pressing the tabs. Replace with an LED bulb of the same type (max 2W). Reinstall cover.
Why is there ice build-up in the fridge compartment?
Ensure the door is closed properly. The door gasket may need cleaning or replacement. Also avoid placing hot food inside.
How do I clean the condenser coils?
Unplug the fridge. Use a vacuum cleaner with a brush attachment to remove dust from the coils at the back or bottom. Do this every 6 months.
Why is the fridge making loud noises?
Normal sounds include compressor humming and refrigerant flow. If it's unusually loud, check if the fridge is level and adjust the feet. Also ensure it's not touching a wall.
How to adjust the door alignment?
Open the door and locate the hinge screws. Use a screwdriver to loosen and adjust the height or tilt. Tighten screws after adjustment.
What do the error codes mean?
Common codes: E1 (sensor failure), E2 (defrost issue). Refer to the user manual for full list. If persists, contact Hitachi service.
User questions about R-VG400PRU8 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual R-VG400PRU8 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. R-VG400PRU8 by HITACHI.