DW626 - Uncategorized DEWALT - Free user manual and instructions
Find the device manual for free DW626 DEWALT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hammer drill/driver |
| Brand | DeWalt |
| Model | DW626 |
| Dimensions (L x W x H) | 30 x 20 x 10 cm |
| Weight | 2.0 kg |
| Power supply | Mains 220-240 V, 50 Hz |
| Power consumption | 600 W |
| No-load speed (variable) | 0-3000 rpm |
| Number of speeds | 1 |
| Chuck | Keyed chuck 13 mm |
| Drilling capacity (steel) | 13 mm |
| Drilling capacity (wood) | 40 mm |
| Drilling capacity (concrete) | 16 mm |
| Main functions | Drilling, screwdriving, hammering, reverse |
| Maintenance and cleaning | Unplug before cleaning; use a damp cloth without solvent; check brushes regularly |
| Safety | Wear safety glasses and hearing protection; unplug before changing accessories |
| Spare parts and repairability | Brushes, chuck, switch, power cable available |
| General information | CE compliant; double insulation |
Frequently Asked Questions - DW626 DEWALT
How to change the chuck on the DW626?
To change the chuck, insert an Allen key into the chuck retaining screw and turn counterclockwise. Remove the old chuck and screw on the new one. Make sure the screw is tight.
How to use the hammer function?
The hammer function is activated by turning the selection ring behind the chuck. Set it to the hammer symbol. Use it only for drilling in masonry, concrete, or stone.
How to adjust the rotation speed?
Speed is variable via the trigger. Pressing harder increases speed. For constant speed, use the trigger lock button (if present).
What type of oil to use for maintenance?
Use a light oil for power tools. Never lubricate the chuck or motor with heavy oil. Apply a few drops on moving parts after heavy use.
How to reverse the rotation direction?
Use the direction selector above the trigger. Push it to the right for forward rotation (drilling) and to the left for reverse rotation (unscrewing).
What to do if the drill does not start?
First, check that the plug is properly connected and the power cable is not damaged. If the problem persists, test the outlet with another device. If the drill still does not start, contact an authorized repairer.
How to replace the brushes on the DW626?
Unplug the tool. Remove the brush holder caps on each side of the motor. Take out the worn brushes and insert new ones, respecting the curvature direction. Replace the caps and run the tool at no load for 5 minutes to break in.
What is the maximum drilling capacity in wood?
With a suitable drill bit, the DW626 can drill up to 40 mm diameter in wood. For large diameters, pre-drill with a smaller bit.
How to clean the drill after use?
Unplug the tool. Use a dry or slightly damp cloth to wipe the exterior. Never use solvents or abrasive products. Blow out ventilation slots with compressed air.
Where to find spare parts for the DW626?
Spare parts (brushes, chuck, switch, cable) are available from authorized DeWalt dealers or on their official website. Always use original parts.
User questions about DW626 DEWALT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DW626 - DEWALT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DW626 by DEWALT.
USER MANUAL DW626 DEWALT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEWALT
Model : DW626
Category : Uncategorized