PRIMA VI - Digital TV decoder STRONG - Free user manual and instructions

USER MANUAL PRIMA VI STRONG

Digital Audio Amplifier © ] Fig.6 " <STrONG u [0-6 USB Storage Device

1.1 Safety Instructions 2

1.3 Equipment Setup 3

3.1 Connecting to a Terestral Antenna 5

3.2 Connecting to TV with HDMI cable 5

3.3 Connecting to TV with SCART cable 5

344 Connecting to a Digital Audio Amplifier with S/PDIF 5

3.5 Connecting to a Digital Audio Amplifier and TV using HDMI 6

3.6 Connecting to an analogue Audio Amplifier 6

3.7 Connecting a USB storage device 6

4.0 STARTING UP FOR THE FIRST TIME 6

5.0 QUICK GUIDE TO USING YOUR RECEIVER 7

6.1 Changing channels 7

62 Info Banner 3 6: Selection of audio language 3 64 Teletert 3

1.1 Safety Instructions

DO NOT INSTALL YOUR RECEIVER: In a closed or poor ventilated cabinet; directiy on top ofor under any other equipment; on a surface which might obstruct the ventilation slots, DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: = To direct sunlight or any other equipment that generates heat to rain or intense moisture; to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc. Do not use a damaged power cord. I may cause a fre or an electric shock. Do not touch a power cord with wet hands. may cause an electric shock. When the receiver is not used for a long period oftime, you should unplug the power cord from the wall socket. = Do notuse alcohol or ammonia based liquids to clean the receiver. IF you wish, your may clean your receiver with a sof lintfree cloth slightly made damp with a mild soap solution, and on afer disconnecting from the mains voltage supply. Make sure no foreign object fall through the ventilation slots because this could cause fire or an electric shock Do not place any objects on top ofthe receiver because this might prevent proper cooling ofthe companents inside. Safety Precautions Never ty to open the receiver. lis dangerous to touch the inside ofthe receiver due to high voltages and possible electrical hazards. Opening the receiver will void the warranty ofthe product. Refer all maintenance or servicing to suitably qualied personnel. When you are connecting cables, be sure that the receiver is disconnected fiom the mains supply voltage. Wait a few seconds after switching ofFthe receiver before you move the receiver or disconnect any equipment. Itis a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption oFthe installed equipment. Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver. Ifthe receiver does not operate normal even afer strict following the instructions in this user manual, it is recommended to consult your dealer.

Your receiver and is accessories are stored and delvered in a packaging designed to protect against lectrc shocks and moisture. When unpacking i, make sure that all the parts are included and keep the packaging away from children. When transporing the receive om one place to another or if you are returming it under warranty conditions, make sure to repack the recever in its original packaging 2 wwwsstrongtv

Par gun <STRON DIGITAL IV with its accessories. Faling to comply with such packaging procedures could damage the product and void your warranty

1.3 Equipment Set-up

Ve recommend you consul a professional installer to set up your equipment. Othenwise, please follou the instructions belouc 1 Refer to the user manual of your TV and antenna. = Make sure that the HDMI cable and outdoor components are in a good condition = Use only a HDMI 1.3 cable or igher for maximum performance. = 1Fyou use TV SCART connection, use then well shielded SCART cable. This manual provides complete instructions for instaling and using this receiver. The following, symbols will serve as follout WARNING Indicates warning information. Tips Indicates any other additional important or hepful information. MENU Represents a button on the remote control or the receive. (Bold Character Move to Represents à menuitem within a window (halic Character)

= User manual = 1 remote control unit = 2x batteries (AAA type) ‘The batteries should not be recharged, disassembled, leckricall short-circuited, be mixed or used with other types of batteries. IFrechargeable accumulators instead ofbatteries are going to be used (8. NiMH), we recommend using types with low self.discharge to ensure long time operation of your remote control.

1.5 Usage of external USB devices

Ii recommended to use USB 2.0 storage devices ar higher. Iyour device is not compatible to USB 2.0 specications, recording, playback and other multimedia functions of the receiver might not iork proper To ensure best performance of your USB storage device please forma t via your receiver (through the menu “Media” to FAT32 system, Other le systems are not supported by the receiver However ii possible to use already NTFS formatted disk STRONG cannot guarantee compatibility with all ypes ofUSB storage devices. 1Fyou are going to use external USB HDDS {Hard Disk Drives), please consider that power specifications may excecd the supported output of jour receiver(ma.5 V/800 mA}. Fs0, please connect our USB HDD to an according external pour adapter. lis aduised not to store important information on USB storage desices used with the receiver. Alays make backups of data on your USB storage device before using it with this receiver. STRONG wil not take responsibility for any loss of information or cireumstances caused by loss ofinformation wwwsstrongtv 3 English

1. uss Connector for USB storage devices.

2. IRSENSOR Point your remote control towards this sensor.

MODE INDICATORRED indicates that the receiver is in STANDEY mode. GREEN indicates that the receiver is in OPERATING mode. Standby/On button Switch the receiver ON to running mode or STANDEY mode Fig.2 ‘To connect to your antenna for reception of broadcasted sigrals. To connectthe terrestrial antenna signal to your TV set ‘This connection will allow you to watch digital terrestrial programmes depending on the tuner of your TV and local broadcast conditions. ‘To connect your receiver to a digital home theatre, AV receiver or digital audio amplifier ‘To connect your receiver with your TV set using an HDMI cable ‘To connect your receiver with your TV set using a SCART cable. ‘To connect your receiver to an analogue audio amplifier. Your receiver requires a supply voltage of 220-240 V AC KAuto-selectabie), 50/60 Hz 25%. Please ensure the local power specification meets these requirements before connecting your receiver to the wall outlet. Fig3 Switches the receiver On/Standby Mutes all audio outputs ofthe receiver Page up/doum in all list modes No function Opens the current channel information; 2x opens the current {event information and 3x the signal information Increases/decreases the volume level Opens the main menu, in a menu you wil get one step back Exits from the menu or sub-menu Menu OfE Change channel to previous/next. Menu On: Moves the cursor up/doun. Menu OfE Increases/decreases the volume level Menu On: Change settings for specific menus wwwsstrongtv

Par gun <STRON DGA 11.0K Menu Of Display the current channel ist Menu On: Activates the highighted menu itern.

12. RECORD Records the TV programme to the connected USE storage device

13. TIMESHIFT Acivates the Timeshif function (OH/On)

14.09 Enters a channel number in viewing mode or a value inside the

respective menu 15.EPG (Opens the EPG [Electronic Programme Guide) in TV mode 16.RECALL Back to prevousy watched channel

17. AUDIO Opens the audio language selection

18. TV/RADIO Toggles between TV or RADIO mode

19.FAV (Opens the Favourite group selection

20. FILE Opens the Media Player ist

3.1 Connecting to a Terrestrial Antenna

To receive broadcasted signals, your terrestial indoor or outdoor antenna must be connected to the ANT IN connector on the back ofthe receiver. Use a properly shielded antenna cable and suitable connectors. The ANT OUT connector allows you to loop the antenna signal to a second receiver or TV set. Please consider that the looped signal might be 100 weak if you use an active antenna. Ifthe signals at your location are t00 weak to receive proper signals vith an indoor antenna, we recommend using an outdoor antenna which can be pointed towards the transmission touer. Ask your local dealer for more information.

3.2 Connecting to TV with HDMI cable

Fig.4 The TV set shall be connected with the receiver using a good quality HDMI 1.3 or higher cable. This connection gives the highest possible qualit}.

3.3 Connecting to TV with SCART cable

Fig.4 Your receiver is also equipped with a SCART connector alternativel, the TV set can be connected to the receiver using a good quality SCART cable.

3.4 Connecting to a Digital Audio Amplifier with S/PDIF

Fig4 By cometing your recever to à digital ampfier or home heat system, ou can enjoy the best possible sound quality and mul-channel audio (depending on broadcast}. Connect your Digital wwwsstrongtv 5 English

<STRONG PART ga DIEMALIV Audio Amplifier or home theatre systern with a suitable cinch cable to the S/PDIF connector on the back ofthe receiver.

3.5 Connecting to a Digital Audio Amplifier and TV

using HDMI Fes By connecting your receiver to the latest digital ampliers or Home Cinema systems, preferable with HDMI 1.3 connections, you will enjoy the best possible sound qualit and multi.channel audio (depending on broadcast). Connect the HDMI output of the receiver to an input of your amplifier, and then connect the HDMI output ofthe amplifier to your TV set. Select the correct input on your amplifier to watch and listen to programmes.

3.6 Connecting to an analogue Audio Amplifier

Fig.5 Use the 3.5 mm jack to connect your receiver to the analogue input of your HiFi or audio amplifer with an RCA cable for achieving best possible analogue audio quality.

3.7 Connecting a USB storage device

Fig.6 Ii recommended to use USB 2.0 storage devices or higher for recording and play back of TV programmes or HD movies. Timeshif/recording and playback only works proper when a fast USB storage device such as a USB2.0 HDD is connected to the recever Timeshif/recording and playback of HD content requires à sufficient readurite speed ofthe used USB storage device.

4.0 STARTING UP FOR THE FIRST TIME

When you use your receiver for te frst time, the Welcome “Easy install" menu appears. Use A V to move the highight to the setting you wish t alter and use 4 Lo change values. Start by selecting your language using 4. Once you have selected your language, press V to move the highight to the next item and use 4 10 change. Language Here you can choose your language. Region Select your region where this receiver is used. Sub: Select Normal to display subtiles per default, Select Hard of Hearing to show HoH subtiles per default. Select Offta hide subtiles per default Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred conversion method. Options are: ‘Auta (automatic detection of aspect ratio), 4:3 Panscan (Displays 16:9 Widescreen broadcasts full sereen on your 4:3 TV), 43 letterbox (black bars on top and under the picture on a 4:3 TV) and 16:9 (use this setting for 169 TV sets) ‘Scan mode Select Al to store scrambled and free to air channels or select Free to store on free to air channels. NOTE: Scrambled channels cannot be viewed with this receiver. 6 wwwsstrongtv

Par gun <STRON DIGTAL IV Connection: Use this option to adjustthe established connection to your TV set. Select HDMI or TV SCART. 2 os pr da ht on nm te nb ét When all settings have been made, move the highight to OK and press OK to continue. Wrong region selection can lead to missing channels or channels being stored at wrong positions in the channel list. The receiver will now advance to the Aerial Adustment screen This part ofthe wizard is of great help when setting up your antenna system. Use A Y to move the highlight to the setting you wish to alter and use 4 to change values. The felloving settings are available: Antenna Power: Set to On if you use an active antenma. When set to On, 5 V will be present at he ANT IN connector oFthe receive. Select Offor passive antennas. Besper Select On for an audible indication of signal reception. Offturms the beeper of. Channel No. Select a channel that is known to carry a broadast in your region. The Signal Strength and Signal Quality bars give a visual indication ofthe reception. AAdjust your antenna to obtain maximum signal strength and qualit. When all settings have been made, press OK to start scanning. The receiver will search for al available channels now Once scanning is finished, the receiver switches to vieuing mode. Ifthe Wélcome menu does not appear afer switching on the receiver the first tie, reset the receive Lo factory settings by pressing the MENU button and selecting Load Factory Seting in the submenu Tools, (DEFAULT PIN: 1234).

5.0 QUICK GUIDE TO USING YOUR RECEIVER

Ve at STRONG understand that you can't wait to enjoy your new high definition digital terestral receiver. The following quick guide will make you familiar with the basic operation of this device. We do, however, adhice you to read the full manual to get the best performance fiom your receive. To tu your receiver ON or to Standby, press the Ü button on the remote control or on the front parel Choose the desired channel with the À W buttons. Alternativel, you can digit the channel number with the 0-9 buttons on the remote control or press OK in viewing mode to display the channel lis The volume can be adjusted with the 4 buttons.

Your new receiver is equipped with several features to make watching TV a true pleasure. This paragraph describes these features. Please also read chapter 7.0 o get fariliar vith the menu of your receive.

6.1 Changing channels

Following ways re pessible for changing channels with your new recever: 1 Via direct access using the 0-9 buttons Via the channel ist through OK and the PG+/PG buttons. = Viathe AY buttons. wwwsstrongtv 7 English

To gain direct access to a certain channel, simply input its number with the 0-9 buttons on the remote control. Channel numbers can be up to four digit long. Entering a number with less than four digits is possible. Just wait a few seconds and your receiver ill switch to the selected channel or press OK immediately after selecting the channel number

Press OK in viewing mode to display the Channel List. Use A W in the channel ist to highlight your channel ofchoice and press OK once to select the highighted channel. Press OK again to leave the channel list mode. Inside the channel list is possible to use the PG+/PG- buttons as well in order to scroll page:wise through the lis Use 4 to toggl betneen the A Channel ist and Favourite ist(s) or press FAVin viewing mode for alist of available Favourite lists. 6:13 Using the A v buttons A suitches to the net channel *Y suitches to the previous channel.

file watching TV you can press the INFO button at an time to access current information about the channel and event. Press INFO ice for extended EPG details about the current channel. Press INFO three times for technical detals about the current channel Event information is displayed when avalable. Avalabilty depends on broadcast.

6.3 Selection of audio language

Some channels support a choice of audio formats and/or languages. To select another audio stream, press AUDIO in viewing mode. À lis th available audio streams will now be displayed. Use À W to Select the desired stream and confirm vith OK. The audio channel as stereo, mono, lef and right can be selected with the 4 buttons.

Your recever includes a ful featured Teletex To access Teleteu, press the TTX button in vieuing mode and use the 0-9 buttons to input the number ofthe page jou wish to see The coloured buttons ofthe remote control allow you t jump to selected pages direct as indicated on the bottom fthe Tletet screen. Use the À W buttons to select ome page up or dou, press the 4) buttons to select subpages. Press EXIT or TTX to get back to viewing mode.

Some channels support a choice of subtile languages. Press SUBTITLE in viewing mode to display à list of available subtile languages. Select your subtile ofchoice with À and press OK to confirm. Press EXIT to leave without making changes * A ee oo hab ot pp on ma er nn Tnt Ü wstrongiv

Timeshif. allows you to pause ve broadeass and resume playback later, Press TIMESHIFT in ici mode to actvate this mode. On screen the message Timeshjf On appears, ve TV keeps playing. To pause press the H button and press > 10 resume Timeshified playback. Press 4 D for fast rewind/ fast forward. Press I to return to ve TV. Press TIMESHIFT to eut the Timeshif. mode. Timeshif and is playback onby work proper when a fast USE storage device such as a US82.0 HDD is connected to the recever Timeshf and playback of HD content requires suficient read urite speed ofthe used USB storage device.

6.7 EPG (Electronic Programme Guide)

‘The Electronic Programme Guide is a very useful function that allows you to view event schedules and programme information and to mark events/movies fr recording, To access the EPG, press the EPG button in viewing mode. Use À W to select a channel and 4 to select an event. Press OK to display detailed information ofthe selected event. Use EXIT to qui the detailed information screen. Press RED to access further step functions. Use 4 to select the desired step and OK to execute it Press EXIT to quit the step function. Press GREEN o set a timer for a selected event, Refer to section

73. for details of the timer function.

Avalability of EPG data depends on broadcast

6.8 Instant Recording

Your new receive allows you to make an instant recording of the programme you are watching. Simply press RECORD to star he recording. To enter the duration fr the recording, press RECORD again. Use the 0-9 buttons to enter the recording time. AEthe begin ofthe recording a recording sign will be shoun for a short while on the upper le comer of jour TV screen. To stop the recording, press ML. Select Yes and press OK again t stop te recording You can access the Record Manager via the FILE button, and select Record by pressing the button 1 See chapter 7.61 for details.

‘The main menu gives you access to settings, multimedia functions and games. To access the main menu, press MENU in viewing mode. The main menu consists ofthe following sub menus: Edit Channel, Installation, System Setup, Tool, Game and Media ‘Throughout he main menu, MENU or EXIT can be used to get back to the previous screen

Use A Y to select Edit Channel and press OK or to enter. Use À Y to highlight the submenu of choice and press OK to select Press EXIT or 4 to get back to the main menu.

7.1.1 TV Channel List

In Edit Channel menu select TV Channel List with A W and press OK to enter. Use 4 10 change the channel group (assumed you have ready set up favourite groups) Select the channel oFchoice with A V. Press OK to view the selected channel in the preview box. wwwsstrongtv English

<STRONG PART ga DIEMALI

7.1.1.1 Adding channels to favourite lists

Channels from the TV Channel List can be added to up to 8 different favourite groups. Press FAV in TV Channel List to access this function. The FAV sign on the top oFthe screen will move up to indicate thatthe Favourite function is selected. Use A W to select a channel you wish to add to a Favourite group. When the highlight is on the channel of your choice, press OK. A list with all available Favourite lists will now pop up. Use A to select the favourite ist you wish to add the channel to and press (OK, press EXIT to finalize the process. Favourite channels will be marked with a heart symbol. When all changes have been made, press EXT tuice. À confirmation banner will pop up. Select Yes to save he changes or No to discard.

71.12 Locking channels

Locked channels can only be watched after entering the PIN code. (DEFAULT PIN: 1234) Te lock or unlock a channel press RED while in TV Channel Lit. The red Lock sign on the top ofthe screen will move up to indicate that the Lock function is selected. Use À W to select the a channel and press OK to lock or unlock. You are asked to input the PIN code, (DEFAULT PIN: 1234 Locked channels vil be marked with the & symbol. Lockingunlocking multiple channels in one session is possible. When al changes have been made, press EXT ivice. À confirmation banner il pop up. Select Yes t save the changes or No to discard.

711.13 Skipping channels

Channels marked with Skp will be skipped when zapping channels with the A W buttons. The channels wi til be available rom the channel ist. To mark channel for skipping, press GREEN wéile in TV Channel List The Skip symbol on the top ofthe screen will move up to indicate that the Skip function is selected. Use À W to select a channel and press OK to mark or ummak it for skpping. Channels set for skppingwil be marked with the = symbol. When all changes have been made, press EXITtwice. À confirmation banner will pop up. Select Yes t save the changes or No to discard.

71.14 Moving channels

To enable the Move function, press YELLOW ue in TV Channel List. The Move symbol on the top of the screen will move up to indicate that the Mave function is selected, Use À W to select a channel and press OK to select. Now you can move the selected channel up or dou inside the channel ist by using À W. When the channels on the position of your choice, press OK again, The channel is now fned on ts new position. When al changes have been made, press EXIT vice. À confirmation Banner wi pop up. Select Yes t save the changes or No to discard

7.1.1.5 Editing channels

he Edi function allows ou to So, Rene ar Delte channels. To enterthe Edit menu, press BLUE while in TV Channel List. The Edit Channel menu ill appear. Hfyou made changes in the previous menu, but haven't saved them yet, you wil be asked to do Son Press RED 10 enter the Sort menu Use A to select sorting method and press OK to confirm. w wstrongiv

Par gun <STRON DIGITAL IV Possible methods are: Name (AZ) Soring in alphabetcal order from A to Z. Name (ZA) Soring in alphabetcal order from Z to A. Free/Scramble: First in the list will be Free-To-Air channels. Lock All unlocked channels wi placed first in the list. Default: Soring by searched Order (from lowest to highest frequency or by LCN numbering). Rename Press GREEN in Edit Channel to enable the Rename function. The Rename sign will move up to indicate that Remame is selected. Use A W to highlight a channel and press OK to select, À text field vill now pop up at the right ofthe screen. Use 4 A Y to select characters and enter them with OK. ‘When you have finished editing, press BLUE to enter the changes. When all changes have been made, press EXIT twice. Select es to save the changes or No to discard. Delete Press BLUE in Edit Channel to enable the Delete function. The Delete sign will move up to indicate that Delete is selected. Use À W to highlight a channel and press OK to mark it for deletion. When you have marked all channels you wish to delete, press EXIT twice. À confirmation banner will be displayed. Select Ve to delete the marked channels or Na to cancel

7.1.2 Radio Channel List

Basical, the operation ofthe Radio Channel List is the same as in the TV Channel List, The only difference is that in Radio Channel List there is no video information, so it will always display the radio background on the preview screen.

Use this menu to delete al stored channels. Select Delte Al with À W and press OK. The receiver asks you to enter the pin code. (DEFAULT PIN:1234). Inside the confirmation window select Yes with > and press OK to delete or select No to cancel. WARNINGI ‘The Delete al function will permanently delete al current channels and all Favourite lists from your receiver, and you are not able to leave the menu until you search for channels again.

7.1.4 Rename Favourite list

‘This menu allows you to personalize the names ofthe 8 available Favourite lists. Use A to select Rename Favourite Lis from the Edit Channel Menu and press OK to proceed. The names ofall groups are now displayed. Select a favourite group with À W and press OK to edit ts name. A text field wi now pop up at the right ofthe screen. Use 4 AV to select characters and ‘enter them with OK. When you have fnished editing, press BLUE to save the changes. When all changes have been made, press EXIT twice to leave his menu: wwwsstrongtv English

Use A Y to select Installation and press OK or to advance Select Auto Scan with A W and press OK to enter. Use 4 to toggle between Vs or Mo. When FTA Only is set to Yes, scrambled channels won't be Stored in the channel ist. Use À W to highlight Search. Now press OK o star auto scan. ‘The receiver wil store all found channels in the channel list.

Use À Y 10 select Installation, press OK or D to advance. Use À Y 10 select Channel Scon and press OK 19 enter. Use 4 to toggl betneen available scan modes: By Channel and By Frequency. 1FBy Channel is selected, use the eursor buttons to select Scan Band and Channel Ne. By Frequency is selected, use the cursor buttons to select Frequency and Bandvidth. Highlight Search and press OK Lo stat scanning. New found channels wll be added to the channel ist.

Use A Y to select Installation, press OK or D to advance. Use A Y to select Antenna Power and press OK to enter. Set to On ifyou use an active antenna. Select Offfor passive antennas When set to On, 5 V will be present on the ANT IN commector ofthe receiver. Press EXIT to leave the Antenna Power menu.

7.2.4 LCN (Logical Channel Numbering)

1FLCN (Logical Channel Numbeing) is activated and an LCN signal is provided bythe operator, channels wil be stored in an operator defined order, St LCN to On to activate operator defined channel numbering or Ofto store channels in found order This function en applies when a new channel search is performed.

‘This menu allous you to manage the system settings of your recever. I consists oFthe following, sub menus: Language, TV System, Local Time Seting, Timer Sttng, Parental Lock, OSD Seting and Auto Standby. Press A Y 10 highlight the menu of choice and press OK advance to the ne sercen. Use À W 10 move the ighlight t the seting of choice. Value can be changed with 4. Press EXIT to leave.

‘This menu allows ÿou to set up jour language preferences. Language: Use 4 to select the language for the On Screen Display. First Audio: Use 4 to select Audio language. Second Audio: Use 4 to select a language that will be played when the language selected at Fit Audio isn* available. m2 wwwsstrongtv

Use this menu to match your receiver to our TV set. The following setings are available: Video Resolution: Use this option t select te video resolution of your TV screen. Options are: By Source [automatic detection of video resolution offered to the receiver), By Native TV {automatic detection of maximal resolution ofTV screen), and manual selections 480, 576i up 0 1080p Please use a setting that matches your TV's specifications. Afier a selection is made, you will be asked to confirm, Selection above 576 is only applicable on HDMI output. ‘Aspect Mode: Use this option to select he aspect ratio of jour TV and the preferred conversion method. The options are: ‘Auto (automatic detection of aspect ratio), 43 Panscan (Displays 169 videscreen broadcasts full screen on your 4:3 TV), 43 letterbox [black bars on top and under the picture on a 4:3 TV) and 16:9 (use this seting for 16:9 TV sets) Connection: Use this option to select he connection to your TV set, Select HDMI or TV SCART. If connection type HDMI is selected, then only the CVES signal is available on the TV SCART. Digial Audio Output: | Toggles betueen PCM and Bistream output. When PCM is selected, all digital audio will be converted to stereo audio. Bitstram enable you to listen or transfer DolbyDigital/DolbyDigitals audio to the TV via HDMI or to a Home “entertainment system [for example) through coaxial S/PDIF.

7.3.3 Local Time Setting

Here you can set up Your region and time zone. Region Use 4 to select he region you live in. GMT Usage Set to 8y Region for broadcaster defined time, User Define to select manual a GMT zone or to Offto input time and date manual GMT offer: Allous you to adjust the time zone you live in. This option is only available when GMT Usage is set to User Define:The GMT Offet range is "11:30 — +120’ increasing by halfhours progressivel. The cities matching the set GMT Offet are displayed at the bottom ofthe screen. Dayight Saving: Select Offor On to add one hour extra for summer time during the summer. Date: Date and Time settings are available only when GMT Usage is set to Of. Use the 0-9 buttons to enter the date. Press EXIT to proceed Time: Date and Time settings are available only when GMT Usage is set to Of Use the 0-9 buttons to enter the time. Press EXIT to proceed. Time Display Select On to display time on screen, Of to remove.

wwwsstrongtv English

This menu allows you to set up 10 8 timed events for recording or waking up the receiver. Use A V to select Time Setng from the Sjatem Setup menu and press OK to enter. The receive vil display a ist with 8 imers, followed by their respective status, Select the timer you wish t set or change with À W and press OK to proceed The timer setup menu will now be displayed The following setings are avalable: Timer Mode: Choose betueen Of Timer inactive), Once, Dai (Time will be executed everyday, same time) or Week Timer will be exeeuted every week, same day, same time) and Monthly (Timer vil be executed every month, same day, same time) Timer Sen: Choose betueen Channel (Timer will wake up the recever) or Record {Timer wil start t record he scheduled event) Wokeup Channel Use 4% to select the channel tre timer will wake up with Wakeup Date: Use the 0-9 buttons to imput the te for he timed event Wakeup Time: Use the 0-9 buttons to imput te stat time. Duration: Use the 0-9 buttons to imput the timer duration. When al settings are according to your wishes, use À W to move the highlight to Save and press OK 0 confim. To quit the timer without saving your settings, move the highlight to Cancel

‘This menu allows you to protect the instalation menu and/or channels with a PIN code. You can also enter a new PIN code in the Parental Lock menu, Use A to select Parental Lock from the System Setup menu and press OK to proceed. You will be asked 10 enter your PIN code. (DEFAULT PIN: 1234) Menu Lock Locks the instalation menu. You can set Menu Lock to On or Of. Parental Rating Choose between: Of 4 years and up to 18 pars. Channels with a parental rating above the chosen age wall be protected with a PIN code (if available in your local broadcast.) New Passvord Enter your new PIN code (4 dits) here. Confirm Password: Re-enter your PIN code here to conf.

his menu allows you to change setings for. OSD Timeout and OSD Tansparenc}. OSD Timeour: Sets the time fier which on screen banners and messages disappear. The range is 1-10 seconds or Alvays On. OSD Transpareney… To setthe OSD transparencyfom Of 40% with 10% steps Load Default OSD Seti Press OK to clear all OSD setngs and reset to defaut values

Auto Standby is a new feature that helps you reducing power consumption. When set to 30 Min/1 Hour/2 Hours or 3 Hour, he receiver il switch to standby it doesnt receive any command during this time. Set Auto Standby to Offto deactivate the automatic standby function 4 wwwsstrongtv

‘This submenu shows receiver specific information such as hardvrare version and sofiware version. 1 also displays our web address wwstrong. Please have the Inférmation screen on hand when you call our hotine. The person who answers your cal might ask for the information given in this screen,

7.4.2 Load Factory Settings

‘This option allows you to reset the receiver to factory settings, which clears al stored channels. WARNINGI By resetting your receive to factory default, al your settings and stored “channels will be permanentiy deleted. Please use this option with care. Use A Y to select Load Factory Settings in the Tools menu and press OK. You are asked to input your PIN code. Input the correct PIN code using the 0-9 (DEFAULT PIN: 1234). À confirmation window is displayed. Select Yes to return to factory settings. Select No to cancel. Press EXIT to leave.

7.4.3 SJW Upgrade by OTA

his recever is equipped with an Over The Air software upgrade function. An Over The Air update might not be available in your region Please visit our website wwstrong vor contact your local] Eenice Ron ne for more information about this option

7.4.4 Upgrade by USB

‘This feature allows you to upgrade receiver sofivare via the USB por. When new sofiware is available for your receiver, it can be downloaded from our website wwstrong.. Place the sofare| in the root directory of your USB storage device (HDD, memory stick ete.) and connect the device to the USB port oFthe receive. Select Upgrade by USB from the Tools menu and press OK to proceed. ‘The upgrade menu will now be displayed. Use A W to select Upgrade Mode and choose option Allcode. Use A Y to select Upgrade Fil and choose the fle containing the latest and correct sofare. Once all settings are made, move the highlight to Star and press OK to start the upgrade process. After a few seconds, the receiver asks: ‘Ave you sure to burn flash? Select Yes to finalize the upgrade or No to quit without upgrading. If after a sofiware upgrade, the receiver should behave in an unexpected way. please perform a factory reset as well. See chapter 7.42. WARNINGI AAfer an update the receiver restarts automatically, During the upgrade process NEVER disconnect the receiver from the mains or switch ofthe poerl Doing s0 might damage your receiver and wil void warranty! wwwsstrongtv English

Your recever is equipped with two games which can be played on your TV sereen using the receiver remote control, Use À Y to select Game fiom the Main menu and press OK or D 10 proceed. Select one ofthe available games (Othello or Sudoku) using À W and press OK to start the game. Follow the directions on screen. Press EXIT to quit a game.

‘The Media menu consists ofthe following submenus: Media Player, HDD Information, DVR Seting and Remove USB device safeh. Use A Y to highlight the menu of choice and press OK to enter. Press EXIT to quit.

his function alows playback of different kind off fiom the connected USB storage device. In the Media menu, select Media Player and press OK to enter this men. When entering the media player the highlights on the USB storage device. Press V and OK to open the directory respectively it olders/subfolders First select which fles you like t play back. Use the button 1 to switch betueen Video/Record/Music or Image. Press A W 10 select a fle or folder and then press OK to open the folder/subfoder (if applicable) or start playback ofthe fl. Press the EXT button to eu. Use the buttons Ike described below in order to choose functions during the different playback modes {ike described in the help banner belou): Video: INFO: Press the INFO button to set repeat mode. The options are repeat folder oder icenfrepeat once 1 or no repetition (no icon shown) % During the playback ofa movie with extemal subites, press 1 to enter the subtile menu. In this menu you can select size and colours of. your preference. 2 Press the button 2 to open the Sort menu. You can sort by Name/Time. or Size. # Press the button 7 to apen the Edit menu. This menu allows accessing the following functions by entering the number: rename 4, copy 5, delete 6, create folder 7. One step back or leave the folder and quit the function. 2 Press 210 enter a new name for the selected recording. 3 Highlight the recording that you want to lock. Afier pressing 3 you will be asked to input your PIN code, DEFAULT PIN: 1234. Afer entering your PIN code, the recording is locked. you want to unlock the recording again, press 3 again. Press 4 to mark the recording you want to delete. By selecting the same recording and pressing 4 again you can remove the delete marker again. Press EXIT to delete. 16 wwwsstrongtv

DIGITAL IV EXT: One step back or leave the folder and quit the function. Music: # Press 4 to open a previous|y created playlist. Then you can select the music fl that you want to add your play lis by pressing 5 [a single file will be added to the playlist) or 6 (al les ofthis directoryfolder will be added to the play list s: Press 5 to add a fl to the playlist. À Favourite icon will be shown next to the file. & Press 610 add al files ofthis directory/flder to the playlist. Press 6 again to ‘delete al fles from the play list # Press 7 to open the Edit menu. This menu allows accessing the following functions by entering the number: rename 4, copy 5, delete 6, create folder 7. 2 Press button 2 to open the sort window, You can sort by Name/Time/Size and Favourite. INFO: Press the INFO button to set repeat mode. The option is Repeat Folder/ Random Folder/Repeat One. EXT: One step back or leave the folder and quit the function. Image: # Press 4 10 open a previously created playlist. Then you can select the image fl that you want to add your play lis by pressing 5 [a single file will be added to the playlist) or 6 (al les ofthis directory/older will be added to the play list s: Press 5 to add a fl to the playlist À Favourite icon ul be shown next to the file. & Press 610 add al files ofthis directory/flder to the playlist. Press 6 again to ‘delete al fles from the play list. # Press 7 to open the Edit menu. This menu allows you to accessing the fellowing functions by entering the desired number: rename 4, copy 5, delete 6, create folder 7. 2 Press button 2 to open the sort window You can sort by Name/Time/Size and Favourite. INFO: Press INFO to access slideshow settings. You can change the slide time and slideshow repettion. Press 3 to show the fles in a preview of 3x3 pictures. One step back or leave the folder and quit the function.

7.6.2 HDD Information

‘This option shows relevant information about the connected USE device. In this menu you can also format your USB storage device and setup the recording type. Select HDD Information in the Media menu and press OK to enter. Now you will se all details as Free and used Recording Sizes and used fle system. Press the YELLOW button Format to format the connected USB device. Please, enter your PIN code to access this menu and press OK to start formatting. wwwsstrongtv English

<STRONG PART ga DIEMALI WARNINGI Formatting vil permanent} delete ALL data stored on the connected device Please make a backup copy of al data you wish to keep before entering the HDD Format menu. STRONG cannot be held responsible for loss of data from USB devices used vith this receive. Press OK to proceed, select FAT or Cancel or press EXIT to leave without formatting. It is possible to use USB storage devices already formatted in NTFS. Press EXIT to leave this menu

This menu allous you to configure settings for Timeshif, recording and playback. Select DVR Setting in the Media menu and press OK to enter. Use A V to move the ighlight and 4 to change settings. Timeshif Select between Auto, Pause or Of. When Timeshf is se to Au it will. automaticaly star every time air tuning to a Channel. When Timeshf is set Lo Pause it vil start omby fer pressing the VELLOW/1 button. Select Offto deactvate Timeshif. Step te 30 sec to 30 min. Set he time step you Ike to jump fonvard by pressing 4 during playback oF recorded fl, This wi only work when the info banner is displayed on screen. Iitis not, press INFO. Time Shif to Record \fset to On the timeshifled part il be included in your recording when you Start to record he current programme. PS Record Select between On or Of. When Ofis selected, recordings ill also indude subtiles and Teletex (when available). Record to PS mode On allows recordings without these extras which will need less space on your USB device. Press EXIT to leave this menu.

7.6.4 Remove USB device safely

Select Remove USB device safly from the tools menu and press OK. The receiver will display a message indicating that you can safely remove your storage device from the receiver. NOTE: fer performing this function, the USB device is no longer accessible from your receive. T gain access to your storage device again, re-insert it or svitch the receiver to standby and on again.

‘There may be various reasons for abnormal operation ofthe receiver. Check the receiver according to he procedures shoun below IFthe receiver does not work propery after checking it, please contact your dealer or the local Service Hotine. Do NOT try to pen or disassemble the receiver. may cause 2 dangerous situation and warranty wil be void. Problem Possible cause What to do LED indicator not it Mains lead unplugged Check mains plug D wstrongiv

<STRONG DIGITAL IV Problem Possible cause What to do No signal found Aerial is disconnected Aerial is damaged/misaligned Out of digital signal area Active antenna requires to switch ON antenna power external power Check aerial lead Check aerial Check with dealer Suitch receiver's Antenna Power ON/connect external power No picture or sound on TV or amplifier HDMI or SCART is not selected on your TV or amplifier or the unit is set to higher resolution as the TV supports. TVJamplifir is not switched on Switch to correct TVamplifier input Select lower resolution on Switch TV/amplifer on. CheckiFS/PDIF connection is used. Scrambled channel Message Channelis scrambled Select alternative channel No response to remote control Receiver of. Remote not aimed correct Front panel obstructed Remote batteries exhausted Plug in and turn on plug {im remote at front panel Check for obstructions. Replace remote batteries Forgotten PIN code Forgotten channel lock code Default PIN is 1234 Contact local Service Hotine or send email to our Support via vawstrong iv Afler moving the receiver to another room/area you are no longer able to receive digital reception Antenna signals are 100 weak The signal strength/quality might be less than before, if using an indoor antenna. Press the INFO button on remote 3x to cal up signal bars and adjust antenna for maximum) reception or rescan channels When using an active antenna, check antenna power. sy to use an outdoor antenna. The receiver suitches of automaticalh. Auto Standby function enabled. Disable auto standby. See

section 7.3.7 for detail.

Playback of video {or Timeshif) is causing picture freeze/macro blocks or similar distortion, especially on HD content. Readjurite speed of your USB device could be too low Make sure to use a USB storage device with suffcient speed and space, Pen drives CUSB sticks”) may not support suffcient speed wwwsstrongtv English

<STRONG DIGITAL IV General Data Supply Voltage: 220 240 V AC (SMPS), 50/60 Hz Power Consumption: 3.40 W (yp.), 12.00 W (max) Power consumption in Standby: 0.32 W Operating Temperature: 0:40 € Storage Temperature: 30 +80" C Operating Huridity Range: 10-85%, RH, Noncondensing Size (WADXH) in mm: 138x112x40 Netweight: o33kg wwwsstrongtv El English