ZEUS52EA3K - Inverter CONCEPTRONIC - Free user manual and instructions
Find the device manual for free ZEUS52EA3K CONCEPTRONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | UPS Line-Interactive |
| Apparent Power (VA) | 5200 VA |
| Active Power (Watts) | 3000 W |
| Number of Output Sockets | 8 sockets (4 with surge protection + 4 with protection and battery backup) |
| Nominal Input Voltage | 230 V AC |
| Nominal Output Voltage | 230 V AC (regulated) |
| Input Voltage Range | 160 – 290 V AC |
| Output Waveform | Pure sine wave |
| Typical Backup Time (50% load) | 15 minutes |
| Typical Charging Time | 4 hours |
| Battery Type | Sealed lead-acid battery, maintenance-free |
| Battery Voltage | 48 V |
| Surge Protection | Yes (surge arrester, RJ45 and coaxial protection) |
| Electrical Noise Filtering | Yes |
| Communication Interfaces | USB port, RS-232 serial port |
| Included Management Software | Yes (compatible with Windows, Mac, Linux) |
| Dimensions (W x D x H) | 400 x 250 x 210 mm |
| Weight | 18 kg |
| Noise Level | Less than 45 dB |
| Operating Temperature | 0 °C to 40 °C |
| Operating Humidity | 20 % to 80 % (non-condensing) |
| Maintenance and Cleaning | Dust the ventilation grilles regularly with a soft cloth. Do not use solvents. |
| Safety | Built-in thermal circuit breaker, emergency stop, short-circuit protection |
| Spare Parts and Repairability | Replaceable batteries, standard fuses. Contact authorized after-sales service. |
| General Information | Brand Conceptronic, Model ZEUS52EA3K, Warranty 2 years |
Frequently Asked Questions - ZEUS52EA3K CONCEPTRONIC
What is the power rating of the Conceptronic ZEUS52EA3K UPS?
The UPS offers an apparent power of 5200 VA and an active power of 3000 W, suitable for sensitive IT equipment.
How many sockets are available on this UPS?
The device has 8 sockets: 4 with surge protection only and 4 with protection + battery backup.
What is the typical battery backup time?
At 50% load, the backup time is approximately 15 minutes, giving you time to save your work and shut down equipment.
How do I replace the UPS battery?
The battery is accessible via a front panel. Unplug the UPS, remove the cover, disconnect the terminals, and replace with an identical battery (48V). Consult the manual for exact references.
Does the UPS make noise?
Under normal operation, the noise level is below 45 dB (quiet). A slight hum may be heard during charging or battery mode.
What types of equipment can I connect?
This UPS is designed for computers, servers, NAS, routers, and other sensitive electronic devices. Do not connect high-power devices like laser printers.
How do I clean the UPS?
Dust the ventilation grilles with a soft, dry cloth. Never use liquid or abrasive products. Ensure the device is unplugged before cleaning.
What should I do if the UPS beeps?
Intermittent beeps usually indicate a battery discharge or overload. Check the connected load and battery life. Consult the manual for beep codes.
Can I use the UPS with a generator?
Yes, but the generator's output voltage must be stable (160-290 V AC). The UPS may switch to battery frequently if voltage fluctuates. A generator with automatic voltage regulation is recommended.
Where can I find spare parts for this UPS?
Contact Conceptronic after-sales service or an authorized reseller. Batteries and fuses are available as standard spare parts. Refer to the manual for part numbers.
User questions about ZEUS52EA3K CONCEPTRONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual ZEUS52EA3K - CONCEPTRONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZEUS52EA3K by CONCEPTRONIC.