iQ10-WB - Speaker Turbosound - Free user manual and instructions
Find the device manual for free iQ10-WB Turbosound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Loudspeaker |
| Brand | Turbosound |
| Model | iQ10-WB |
| Woofer Size | 10 inches |
| High-Frequency Driver | 1-inch compression driver |
| Amplifier Power | 250 W Class D |
| Frequency Response | 60 Hz – 20 kHz |
| Maximum SPL | 124 dB peak |
| Dispersion (Horizontal x Vertical) | 90° x 60° |
| Impedance | 4 Ω (passive mode) / 20 kΩ (active input) |
| Enclosure Material | 15 mm birch plywood |
| Grille | Powder-coated steel with acoustic foam |
| Color | White (WB) |
| Dimensions (H x W x D) | 534 x 330 x 320 mm (21.0 x 13.0 x 12.6 in) |
| Weight | 14.5 kg (32.0 lbs) |
| Input Connectors | 1 x XLR-1/4" combo, 1 x XLR link output, 1 x powerCON |
| DSP Presets | Flat, Monitor, Delay, User |
| Mounting Options | Pole mount (35 mm), M10 flying points (8x) |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Protection Features | Overcurrent, overvoltage, thermal limiting |
| Recommended Use | Live sound, fixed installation, portable PA |
Frequently Asked Questions - iQ10-WB Turbosound
How do I connect the iQ10-WB to a mixer?
Use a balanced XLR cable from the mixer output to the combo input on the speaker. Set the input level switch to Line if the mixer output is line level, or Mic if using a microphone directly.
Can I use the iQ10-WB as a floor monitor?
Yes, the iQ10-WB has a wedge shape and can be used as a stage monitor. Select the Monitor DSP preset for optimal performance.
What is the difference between iQ10 and iQ10-WB?
The WB stands for White, indicating the cabinet color is white instead of black. Otherwise, specifications are identical.
How do I mount the speaker on a tripod stand?
Insert the speaker's pole mount socket (35 mm) onto the stand's pole. Ensure the stand is rated for the speaker's weight (14.5 kg) and secure the tilt adjustment if needed.
What power cord does the iQ10-WB use?
It uses a standard powerCON connector. A powerCON-to-IEC cable is included. Use a mains cable suitable for your region (e.g., C13 connector to wall).
How to reset the built-in DSP?
Press and hold the MUTE button on the rear panel for 5 seconds until the LED flashes. This resets the DSP to the default Flat preset.
Can I daisy-chain multiple iQ10-WB speakers?
Yes, use the LINK XLR output to connect to the next speaker's input. The daisy-chain limit is typically up to 4 speakers per mixer channel.
What is the maximum ambient temperature for operation?
The iQ10-WB can operate in ambient temperatures from 0°C to 40°C (32°F to 104°F). Avoid exposure to direct sunlight or rain.
How often should I clean the grille?
Clean the grille every 6 months using a soft brush or vacuum with a brush attachment to remove dust. Do not use liquids or compressed air directly on the drivers.
Is the iQ10-WB suitable for outdoor use?
The iQ10-WB is not weatherproof. For outdoor use, protect it from moisture and direct sunlight. Consider using a cover or placing it under a canopy.
User questions about iQ10-WB Turbosound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual iQ10-WB - Turbosound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iQ10-WB by Turbosound.
USER MANUAL iQ10-WB Turbosound
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Turbosound
Model : iQ10-WB
Category : Speaker