S-Manuale 64 Heritage Line - Coffee grinder ECM - Free user manual and instructions
Find the device manual for free S-Manuale 64 Heritage Line ECM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Coffee Grinder |
| Brand | ECM |
| Model | S-Manuale 64 Heritage Line |
| Burr Size | 64 mm flat steel burrs |
| Adjustment | Stepless micrometric |
| Dosing | Manual (single or double dose) |
| Hopper Capacity | Approx. 300 g |
| Dimensions (W x D x H) | 120 mm x 200 mm x 350 mm |
| Weight | 5.0 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Power Consumption | 250 W |
| RPM (at 50 Hz) | 1400 rpm |
| Noise Level | < 70 dB(A) |
| Construction Material | Die-cast aluminum, stainless steel |
| Cleaning | Disassemble burrs for deep cleaning; use brush |
| Safety Features | Motor thermal overload protection; non-slip feet |
| Spare Parts Availability | Through ECM service centers |
| Warranty | 2 years (conditions apply) |
| Included Accessories | Cleaning brush, tamping mat (optional) |
| Certifications | CE, RoHS |
Frequently Asked Questions - S-Manuale 64 Heritage Line ECM
How do I adjust the grind size on the ECM S-Manuale 64 Heritage Line?
The grinder features a stepless micrometric adjustment ring. Turn the ring while the burrs are running to avoid jamming. Fine adjustments for espresso; coarser for filter. Refer to the manual for full range.
Can I use the S-Manuale 64 for single dosing?
Yes, the grinder is designed for single dosing. Use the included bellows or a single dose hopper (optional) to minimize retention. The flat burrs give consistent results even with low doses.
How often should I clean the burrs?
Clean the burrs every 2-4 weeks depending on usage. Remove the hopper, unscrew the upper burr carrier, and brush off coffee residues. Avoid water on burrs; use a dry brush or vacuum.
What is the correct RPM for the 64 mm burrs?
The motor runs at 1400 RPM (50 Hz) / 1700 RPM (60 Hz). This relatively low speed reduces heat buildup and static, preserving flavor. ECM designed it for optimal extraction.
Is the Heritage Line grinder quiet?
Yes, it operates at around 65-70 dB(A), which is typical for a professional-grade grinder. The aluminum body dampens vibration. Use a soft rubber mat for further noise reduction.
Does the grinder have a safety lock?
The grinder includes a safety microswitch: it will not operate unless the hopper is properly installed. Additionally, the burr chamber cover must be secured. This prevents accidental contact with moving parts.
What spare parts are available for the S-Manuale 64?
Common spare parts include: burr sets (original ECM), hopper, burr carrier, gaskets, and motor brushes. Contact your dealer or ECM's service network. The grinder is designed to be fully repairable.
Can I use the grinder for Turkish coffee?
The 64 mm flat burrs can grind fine enough for Turkish coffee if adjusted very finely. However, stepless adjustment allows precise tuning. Note that very fine grinding may increase retention.
How do I replace the burrs?
Disconnect power. Remove hopper, then unscrew the upper burr carrier (left-hand thread). Lift out the old burr. Install new burr with the correct orientation (alignment pins). Tighten to torque spec (approx. 2 Nm). Lower burr is similarly replaced.
Where can I download the manual for the ECM S-Manuale 64 Heritage Line?
The original manual is available for free on notice-facile.com. You can download the PDF in English or request a translated version. The manual contains detailed instructions on setup, adjustment, and maintenance.
User questions about S-Manuale 64 Heritage Line ECM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Coffee grinder in PDF format for free! Find your manual S-Manuale 64 Heritage Line - ECM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S-Manuale 64 Heritage Line by ECM.