Combi 85 M Q - Lawn mower STIGA - Free user manual and instructions
Find the device manual for free Combi 85 M Q STIGA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Ride-on lawn mower |
| Brand | STIGA |
| Model | Combi 85 M Q |
| Cutting width | 85 cm |
| Engine | 4-stroke petrol, Briggs & Stratton |
| Engine power | 12.5 hp (9.3 kW) |
| Grass catcher capacity | 250 litres |
| Cutting height adjustment | Central, 25 to 75 mm, 7 positions |
| Cutting system | Mulching, collection, side discharge (option) |
| Transmission | Hydrostatic, pedal-operated |
| Forward speed | Variable, 0-8 km/h |
| Turning radius | 50 cm |
| Weight | 320 kg |
| Dimensions (L x W x H) | 2500 x 900 x 1100 mm |
| Fuel | Unleaded petrol |
| Battery type | 12 V – 24 Ah (starting) |
| Safety | Seat contact, parking brake, automatic engine stop |
| Maintenance | Engine oil change, deck cleaning, blade sharpening |
| Spare parts | Available at authorised STIGA dealers |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - Combi 85 M Q STIGA
How to start the mower?
To start, make sure the battery is charged, turn on the ignition, engage the parking brake, then turn the ignition key. If the engine is cold, use the choke (choke) as indicated in the manual.
What type of engine oil to use?
Use a SAE 10W-30 or SAE 30 oil for 4-stroke engines. Check the oil level before each use and change it every 50 hours of operation or once per season.
How to adjust the cutting height?
Central adjustment is done with a single lever. Move it to the desired position (25 to 75 mm). Heights are indicated by notches. Make sure the mower is stopped and the engine is off before adjusting.
How to clean the cutting deck?
After each use, tilt the mower (spark plug up) and remove grass debris with a water jet or scraper. Avoid directing water at the engine and electrical components. Dry thoroughly before storage.
How often to sharpen or replace the blades?
Inspect blades after each use. Sharpen them every 25 hours of cutting or when dull. Replace if damaged or worn. Regular sharpening ensures a clean cut and prevents tearing of the grass.
What to do if the mower does not start?
Check the battery (voltage, connections), fuel level, spark presence (spark plug), and that safety devices (seat, brake) are engaged. Consult the manual for jump start procedures if the battery is discharged.
How to change the blade?
Disconnect the spark plug and wear gloves. Tilt the mower on the side opposite the air filter. Lock the blade with a tool, then unscrew the central bolt. Install the new blade respecting the cutting direction (sharp edge forward). Tighten to the recommended torque.
What fuel to use?
Use unleaded petrol with an octane rating of at least 95 (RON). Avoid petrol containing more than 10% ethanol. Do not fill the tank above the mark to prevent overflow.
How to use mulching mode?
For mulching, install the mulching plug (often supplied) in the discharge chute. The deck must be clean. Adjust the cutting height (do not cut more than 1/3 of the grass height). Mulching finely grinds the grass and redistributes it onto the ground.
Where to find spare parts?
Original STIGA parts are available at authorised dealers and on the official STIGA website. Use your model number (Combi 85 M Q) to order the correct parts. Refer to the manual for the spare parts list.
User questions about Combi 85 M Q STIGA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lawn mower in PDF format for free! Find your manual Combi 85 M Q - STIGA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Combi 85 M Q by STIGA.