DPMX-1216 CEE - Dimmer Eurolite - Free user manual and instructions
Find the device manual for free DPMX-1216 CEE Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DMX Dimmer Pack |
| Channels | 16 |
| Power Supply | 230V AC, 50/60 Hz |
| Max Load per Channel | 10 A (2300 W) |
| Total Max Load | 160 A (36800 W) |
| DMX Connectors | 3-pin XLR (input and output) |
| DMX Protocol | DMX512 |
| Dimensions (W x H x D) | 483 x 88 x 265 mm (19", 2U) |
| Weight | 5.5 kg |
| Mounting | 19" rack mount, included brackets |
| Cooling | Fan-cooled, front-to-back airflow |
| Dimming Curve | Adjustable linear or square law |
| Preheat Function | Yes, adjustable per channel |
| Protection | Overload, short circuit, thermal protection |
| Fuse | Main fuse 16 A (5x20 mm) |
| Operating Temperature | 0°C to 40°C |
| Housing Material | Metal, painted |
| Maintenance | Clean with dry cloth, do not use liquids |
| Spare Parts | Fuses, power cord, fan (available from Eurolite) |
| Certifications | CE, TÜV (expected) |
Frequently Asked Questions - DPMX-1216 CEE Eurolite
How do I set the DMX address on the DPMX-1216 CEE?
Use the DMX address thumbwheel switches on the rear panel. The first channel will respond to the set address, and subsequent channels will follow sequentially.
What is the maximum load per channel?
Each channel can handle up to 10 A (2300 W at 230V). Do not exceed this limit to avoid damage.
Can I use this dimmer with LED fixtures?
Yes, but only with dimmable LED fixtures. Some LEDs may require a trailing-edge dimmer; this unit uses leading-edge dimming, so compatibility should be tested.
Why is one of my channels not responding?
Check the DMX address setting, ensure the fixture is set to the correct address, and verify DMX cable connections. Also, check the channel's fuse if it has blown.
How do I replace a blown fuse?
Disconnect the unit from power. Open the fuse holder on the rear panel, replace the blown fuse with one of the same type (16 A, 5x20 mm). Close the holder and reconnect.
Can I rack mount this dimmer?
Yes, the DPMX-1216 CEE is designed for 19-inch rack mounting and comes with mounting brackets. It occupies 2U of rack space.
What should I do if the unit overheats?
Ensure proper ventilation around the unit. Do not block the fans or air vents. If overheating persists, reduce the total load or check for fan failure.
How do I clean the dimmer?
Use a soft, dry cloth to wipe the exterior. Do not use any liquids or sprays, as they may damage the electronics.
Is there a warranty for this product?
Yes, Eurolite provides a 2-year warranty for manufacturing defects. Keep your proof of purchase for any warranty claims.
Can I control the dimmer without a DMX console?
No, this unit requires a DMX512 control signal to operate. It does not have a built-in standalone mode or manual controls.
User questions about DPMX-1216 CEE Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dimmer in PDF format for free! Find your manual DPMX-1216 CEE - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPMX-1216 CEE by Eurolite.