320/20-4 - Lawn mower GUDE - Free user manual and instructions

Product type	Electric lawn mower
Brand	Güde
Model	320/20-4
Cutting width	32 cm (320 mm)
Cutting height	25-75 mm, continuously adjustable
Grass bag volume	20 L
Motor power	1200 W
Power supply	Electric 230 V / 50 Hz
Cutting type	Pivoting blade rotor
Drive system	Manual push
Net weight	11 kg
Dimensions (L x W x H)	40 x 30 x 35 cm
Sound level	84 dB(A) (K=3 dB)
Mulching function	Yes, with mulching plug included
Ergonomic handle	Foldable for storage
Wheels	4 plastic wheels, diameter 18 cm
Maintenance and cleaning	Clean after each use; sharpen blade once per season
Safety	Engine stops in 3 seconds; anti-start cable
Spare parts and repairability	Replacement blade ref. 320/20-4-01; grass bag ref. 320/20-4-02
General information	2-year warranty; user manual available as PDF

Frequently Asked Questions - 320/20-4 GUDE

How to start the Güde 320/20-4 lawn mower?

Plug the mower into a 230 V socket. Hold the safety handle down and pull the starter cord (or press the button depending on model). Release the handle to stop the engine.

What is the minimum cutting height?

The minimum cutting height is 25 mm, adjustable via central lever up to 75 mm.

How to use the mulching function?

Remove the grass bag and install the supplied mulching plug. The mower mulches the grass and redistributes it onto the lawn as natural fertilizer.

What safety precautions should be taken?

Wear closed shoes and safety glasses. Never mow when the lawn is wet. Always unplug before maintenance.

How to clean the lawn mower?

Use a dry brush to remove grass residue. Never use high-pressure water. Clean ventilation slots with a brush.

What is the grass bag volume?

The grass bag has a capacity of 20 liters. It is advisable to empty it regularly to avoid clogging.

How to sharpen the blade?

Unplug the mower. Turn it over, unscrew the blade and sharpen it with a file. Replace the blade respecting the cutting direction. Check the balance.

Where to find spare parts?

Spare parts are available on the Güde website or from authorized dealers. References: blade (320/20-4-01), bag (320/20-4-02).

What is the noise level of the mower?

The noise level is approximately 84 dB(A). Wear hearing protection if necessary.

How to store the lawn mower?

Fold the handle by unscrewing the knobs. Store the mower in a dry place, protected from frost. Empty the bag and clean it before storage.

USER MANUAL 320/20-4 GUDE

Translation of the original operating instructions Battery lawn mower

320/20-4

95850

ENGLISH Please read the instructions carefully before starting the machine.

DE	Montage	SL	Montaža
EN	Assembly
FR	Assemblage
IT	Montaggio
NL	Montage
CZ	Montáž
SK	Montáž
HU	Szerelés

1

2-3

DE	Inbetriebnahme	SL	Uvedba v pogon
EN	Starting-up the machine
FR	Mise en service
IT	Messa in funzione
NL	Inbedrijfstelling
CZ	Uvedení do provozu
SK	Uvedenie do prevádzky
HU	Üzembe helyezés

2

4-6

DE	Mähanweisungen	SL	Napotki za košnjo
EN	Cutting instructions
FR	Consignes de tonte
IT	Istruzioni per taglio
NL	Aanwijzingen voor het maaien
CZ	Pokyny k sečení
SK	Pokyny na kosenie
HU	Utasítás kaszáláshoz

3

7-10

DE	Betrieb	SL	Delovanje
EN	Operation
FR	Fonctionnement
IT	Esercizio
NL	Gebruik
CZ	Provoz
SK	Prevádzka
HU	Üzemeltetés

4

11

DE	Reinigung / Wartung	SL	Čiščenje / Vzdrževanje
EN	Cleaning / Maintenance
FR	Nettoyage / Entretien
IT	Pulizia / Manutenzione
NL	Schoonmaken / Onderhoud
CZ	Čištění / Údržba
SK	Čistenie / Údrzba
HU	Tisztítás / Karbantartás

5

12

2

1	DE Montage SL Montaža
	EN Assembly
	FR Montage
	IT Montaggio
	NL Montage
	CZ Montáž
	SK Montáž
	HU Szerelés

DE Assembly

SL Assembly

EN Assembly

FR Assembly

IT Assembly

NL Assembly

CZ Assembly

SK Assembly

HU Assembly

1

3

4

	DE	Montage	SL	Montaža
	EN	Assembly
	FR	Montage
	IT	Montaggio
	NL	Montage
	CZ	Montáž
	SK	Montáž
	HU	Szerelés

8

SL Assembly

DE Assembly EN Assembly FR Assembly IT Assembly NL Assembly CZ Assembly SK Assembly HU Assembly

1

5

6

7

	DE	Akku	SL	Akumulator
	EN	Battery
	FR	Batterie
	IT	Accumulatore
	NL	Accu
	CZ	Akumulátor
	SK	Akumulátor
	HU	Akkumulátor

DE Inbetriebnahme

SL Uvedba v pogon

EN Starting-up the machine

FR Mise en service

EN Any works / adjusting on the machine to be only performed with the engine switched off, contact key taken out and when the mowing blade is not moving.

EN Cutting height setting

2

2

	1	2	3
	25 mm 45 mm 65 mm

DE Mähanweisungen

SL Napotki za košnjo

EN Cutting instructions

FR Mowing instructions

3

DE

Mähen

SL kosite

EN

mow

FR

tondre

IT

falciare

NL

maaien

CZ

sekat

SK

kosit

HU

szénaboglya

STOP

DE Mähen - Sammeln

SL kosite - zbirati

EN mow - collect

FR tondre - collecter

1

6

3	DE Mähen - Sammeln	SL kosite - zbirati
	EN mow - collect
	FR tondre - collecter
	IT falciare - raccogliere
	NL maaien - verzamelen
	CZ sekat - sbírat
	SK kosit' - zbierat'
	HU szénaboglya - gyűjt

DE Betrieb

SL Delovanje

EN Operation

FR Fonctionnement

IT Operation

NL Use

CZ Operation

SK Operation

HU Operation

4

START

STOP

5	DE	Reinigung / Wartung	SL	Čiščenje / Vzdrževanje
	EN	Cleaning / Maintenance
	FR	Nettoyage / Entretien
	IT	Pulizia / Manutenzione
	NL	Schoonmaken / Onderhoud
	CZ	Čištění / Údržba
	SK	Čistenie / Údrzba
	HU	Tisztítás / Karbantartás

5

STOP

Technical data

Cordless lawn mower 320/20-4

Art. No	95850
Battery voltage 20 V	---
No-load speed n0	2800 min -1
Cutting width 320 mm
Cutting depth 25/45/65 mm
Collection bag capacity 30 l
Weight without battery/Charging equipment	8,5 kg
Degree of protection IP X4

Noise details

Sound pressure level LpA1)	72.7 dB(A)
Measured sound power level LWA2)	83.8 dB(A)
Guaranteed sound power level LWA3)	90 dB (A)
Measured according to 1) EN IEC 62841-4-3; 2)3) 2000/14/EC amended by 2005/88/ec; 1) Uncertainty K=3 dB (A); 2) Uncertainty K = 3.78 dB (A), Wear ear protectors!

Vibration details

Vibration emission value (triaxial vector sum) determined according to EN 60335
Vibration emission value ah	0.98 m/s2
Uncertainty K = 1,5 m/s2

Battery

Voltage 20 V
Battery type Li-ion
Battery capacity 4,0 Ah
Battery power 80 Wh
Charging time 2,6 h
Net weight 0,67 kg

Battery Charger

Input voltage 230 V
Input power	30 W
Output voltage	20 V
Output current	1,5 A
Safety class	II
Net weight 0,63 kg

WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.

The vibration emission level may be used to compare one tool with another.

It may be used for a preliminary assessment of exposure.

An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

Noise and vibration

• The total vibration value given has been measured according to a standard test procedure and can be used to compare one machine with another;
• The total vibration value given can also be used for a preliminary exposure assessment.

WARNING:

• the vibration emission during actual use of the machine may deviate from the specified value depending on the type of use of the machine and
• the need to establish safety measures to protect the user based on an estimate of the exposure under actual operating conditions (taking into account all parts of the operating cycle, such as the times when the machine is switched off and when it is idling, in addition to the trip time).

Read and understand the operating instructions before using the appliance. Familiarise with the

control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.

The operator is responsible for accidents or risks to third parties.

If you have any doubts about the connection and operation, please contact our customer service center.

Only persons over 16 years of age may work on the appliance. An exception is made for young people trained to acquire knowledge under the supervision of a trainer during vocational education.

This appliance is not intended for use by children.

The machine must not be used by persons with reduced physical, sensory, or mental capabilities, or by persons lacking experience or knowledge, unless they are supervised by a responsible person.

Children must be supervised to ensure they do not play with the machine.

Specified Conditions of Use

The cordless lawn mower is designed for cutting small to medium-sized grass areas in private gardens around the house or in hobby gardens. Due to the physical danger to the user and other persons, the lawn mower must not be used for any other purpose.

Do not use this product in any way other than as stated for normal use. The manufacturer is not liable for damages resulting from failure to observe general regulations in force and instructions in this manual.

The mower must not be used for cutting ashes, hedges, or thickets, for cutting and mulching creepers, or for mowing lawns on roofs or in balcony boxes. The mower must also not be used as a crusher for mulching tree cuttings and twigs, or for leveling any terrain irregularities.

Residual Risks

Even when the device is used properly and all safety regulations are complied with, there may still be some residual risks.

⚠️ Rotating blades may cause serious injuries by cutting or amputating body parts.

Never touch under the housing when the engine is running. Wear gloves! Never remove the collection bag while the machine is operating.

⚠️ Thrown-off stones or soil may cause injuries.

Before mowing, check the area to be mowed for any unwanted objects. Make sure the collection bag is properly attached. Wear safety goggles when working.

⚠️ Poor lighting/light conditions represent a high safety risk.

Provide adequate lighting or good lighting conditions when working with the machine.

⚠ Hearing damage

A longer stay in the immediate vicinity of the running unit may cause hearing damage. Wear ear protectors!

⚠ Damage to health arising from vibrations to hand and arms if the device is used for a long time or if the device is not guided and evaluated properly.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2.

Accident type, 3. Number of injured persons, 4. Injury type(s)

Symbols

Warning/caution!

Read the operating instructions to reduce the risk of injury.

Wear eye protective goggles! Wear ear protectors!

Wear gloves!

Wear safety cut through resistant shoes with safety sole and steel toe!

Warning against thrown-off items

Warning against sharp knives. Knives keep running for a short time after the appliance is switched off.

Keep bystanders in safe distance from the appliance (at least 5 m)

Switch off the engine before any work on it.

Always keep children and unauthorised persons out of reach of the appliance.

Protect against humidity Never expose tool to rain.

Switch the appliance off and remove the contact key before any adjustment, cleaning and servicing work.

Protection class III

CE marking

Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

Guaranteed sound power level L_WA

General Power Tool Safety Warnings

WARNING

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

c) When the battery pack is not in use, keep it away from other metal objects, such as paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6) Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety instructions for Cordless lawn mower

Danger of injury!

Never put your hands and feet near the rotating parts. Keep a distance from the ejection opening at all times.

When working with this machine, do not use spare parts other than those recommended by us. Using spare parts not recommended by us can result in serious injuries to persons or damage to the machine.

Keep children and other persons including animals at a safe distance when using the appliance. Minimum safe distance is 5 m.

Wear personal protective equipment. Wear solid shoes and long trousers. Never use the appliance when barefooted or in light sandals. Wear protective gloves if necessary.

Check carefully the terrain where the appliance is being used and remove any items that could get caught and be thrown away.

Avoid operating the equipment in wet grass, where feasible.

All protection covers and safety devices must be correctly attached to operate the device.

Never remove the collection bag when the machine is being operated.

⚠️ Before using, always visually inspect to see that the blades, blade bolts, and cutter assembly are not blunt, worn, or damaged. Replace worn or damaged blades and bolts in sets to preserve balance. The protective equipment on the appliance is strictly prohibited to be disassembled, changed, or used in conflict with the designation, and it is prohibited to attach any protective equipment of other manufacturers. The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.

Do not start the engine before your feet are at a safe distance from the cutting tools.

Do not tilt the appliance when starting it.

Do not start the appliance when you are standing in front of the ejection opening.

Do not run while working with the appliance. Walk slowly and cautiously.

Be careful when walking backwards – risk of tripping! Maintain a stable posture, especially on slopes. Do not mow on excessively steep slopes. Be particularly careful when changing direction on slopes.

On slopes, always mow across the slope, not up and down.

Pay maximum attention when turning around and pulling the appliance towards you.

Switch off the mower whenever you carry or tilt it, or when you leave the grass area. Wait until all rotating parts have stopped.

If you hit an undesirable object or the appliance starts vibrating, switch it off and remove the plug from the socket. Check for damage and repair any damage.

Switch off the appliance immediately after finishing your work.

• Stop the machine and remove the safety key. Wait until all rotating parts have stopped and the unit has cooled down. Remove the key whenever you leave the lawnmower. • To release a blocked blade. • To adjust the mowing height. • To empty the collection bag.
• Check the machine for proper operation after hitting an undesirable object. Repairs must be carried out before using the machine again. • To lift or transport the machine. • To flip the mower over or carry it (e.g., from lawn to lawn or across a road).
• Clean the mower or perform any other maintenance before inspecting it.

The ON/OFF switch and safety switch must not be locked.

Use only batteries that are specifically designed for this power tool. Using other batteries may cause injuries and a risk of fire.

Do not use the device near flammable liquids or gases. Risk of fire and explosion in case of short circuit.

Maintenance

Rotating blade

Any works / adjusting on the machine to be only performed with the engine switched off, contact key taken out and when the mowing blade is not moving.

Switch the appliance off and remove the contact key before any adjustment, cleaning and servicing work. Wait until all rotating parts have stopped and the appliance cooled down. After each use, clean carefully the cutter bar. Wipe it with a cloth moistened in oil or apply metal treatment spray on it.

Keep the machine clean. Regularly clean the grass ejection chute and machine body. Keep the device, in particular the air vents, clean at all times. Never spray water on the device body! Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only.

Apply environment-friendly oil to all moving parts.

Check the collection bag at regular intervals for any wear and aging.

Repairs and works specified in these Instructions may only be performed by qualified authorised staff.

Use only original accessories and original spare parts.

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

If necessary, a list of spare parts can be found at www.guede.com.

Machine to be stored in a dry place.

Disposal

The disposal instructions are based on the icons placed on the appliance or its package.

Any damaged or disposed devices must be delivered to appropriate collection centres.

Dispose of the batteries in an environmentally friendly manner.

Li-ion batteries are subject to the special disposal obligation. Have any defective batteries disposed of by a specialised shop. The battery must be taken out before the appliance is scrapped. Damaged batteries may harm the environment and your health if toxic vapours or liquids leak out of such batteries.

Therefore, never send a defective battery by post, etc. Please contact your local recycling centre.

Dispose of the batteries when discharged. We recommend applying an adhesive tape on the poles to protect them against short circuit. Never open the battery.

Guarantee

Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.

The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.

The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Important information for the customer

Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label.

Tel.: [phone] / 700-360

Fax: [phone]

E-Mail: [e-mail]

Failure removal

Defect	Cause	Removal
The motor does not start	Battery is empty Charge the battery
	Battery is defective Have it replaced in a Güde authorised service centre
	Contact key is not inserted	See „Operation“ below → 13
	Main switch or safety arch is not controlled	See „Operation“ below → 13
Unsteady running, strong vibrations	Blade is damaged Replace the blade
	Blade is loose Check and tighten the blade clamping
Poor mowing/catching performance	Blade is blunt Have the blade sharpened or replaced
	Collection bag is blocked	Empty the collection bag → 12
	Mowing height adjustment not regulated	Adjust the mowing height → 8
Grass is not collected	Blocked channel	Clean the ejection channel
	Full collection bag	Empty the collection bag → 12
	Too wet grass	Cut in dry weather