Eliminator Lighting

Micro Galaxian Three - Lighting Eliminator Lighting - Free user manual and instructions

Find the device manual for free Micro Galaxian Three Eliminator Lighting in PDF.

📄 16 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Eliminator Lighting Micro Galaxian Three - page 2
2 / 16
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED Effect Light
Brand Eliminator Lighting
Model Micro Galaxian Three
Light Source 3 x 1W LEDs (RGB)
Beam Angle 30 degrees
Control Modes DMX, Sound Active, Master/Slave
DMX Channels 3 or 7 selectable
Power Input 100-240V AC, 50/60Hz
Power Consumption 15W
Dimensions (L x W x H) 5.5 x 5.5 x 6.7 inches (140 x 140 x 170 mm)
Weight 1.5 lbs (0.68 kg)
Housing Material Aluminum and plastic
Cooling Passive convection
Mounting Floor stand or truss mount with included bracket
Operating Temperature 14°F to 104°F (-10°C to 40°C)
Protection Rating IP20 (indoor use only)
Safety Features Overheat protection, fuse protection
Maintenance Clean lens with soft cloth and mild cleaner
Spare Parts Available LED modules, power supply, control board
Warranty 1 year limited

Frequently Asked Questions - Micro Galaxian Three Eliminator Lighting

How do I set up the Micro Galaxian Three?
Connect the power cord, mount the fixture securely, and set the mode using the DIP switches or menu. For DMX, set the address and connect a DMX controller.
Can I use this light without a DMX controller?
Yes, the Micro Galaxian Three has sound-active and master/slave modes for standalone or synchronized operation without a controller.
How do I clean the fixture?
Disconnect power and wipe the lens with a soft, lint-free cloth dampened with a mild glass cleaner. Avoid harsh chemicals.
What is the recommended DMX address for the first unit?
Set the first unit to address 1 using the DIP switches or menu. Ensure no other fixtures conflict by keeping unique addresses.
How many Micro Galaxian Three can I daisy-chain?
You can daisy-chain up to 32 units. Use proper DMX cables and terminate the last fixture with a 120-ohm resistor.
Why is the fixture not responding to sound?
Check that the sound-active mode is selected and the microphone sensitivity is adjusted. Ensure music has enough bass to trigger the sensor.
What does the 'master/slave' mode do?
One unit set as 'master' controls the others (set to 'slave') to create synchronized light shows without a DMX controller.
Can I replace the LED modules?
Yes, LED modules are replaceable. Contact Eliminator Lighting or an authorized dealer for compatible replacement parts.
What power supply does this unit need?
It requires 100-240V AC, 50/60Hz. Use only the supplied power cord. Do not use a dimmer or non-approved power source.
How do I reset the fixture to factory settings?
Press and hold the menu button for 5 seconds until the display shows 'rSt'. Release and confirm to reset all settings.

User questions about Micro Galaxian Three Eliminator Lighting

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual Micro Galaxian Three - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Micro Galaxian Three by Eliminator Lighting.

USER MANUAL Micro Galaxian Three Eliminator Lighting

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Eliminator Lighting

Model : Micro Galaxian Three

Category : Lighting