Mini Par RGBW LED - Lighting Eliminator Lighting - Free user manual and instructions
Find the device manual for free Mini Par RGBW LED Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can |
| Model | Mini Par RGBW LED |
| Brand | Eliminator Lighting |
| Light Source | 4-in-1 RGBW LED |
| Power Consumption | 30W |
| Input Voltage | AC 100-240V, 50/60Hz |
| Beam Angle | 25° |
| Dimensions (L x W x H) | 6.5 x 6.5 x 7.5 in (16.5 x 16.5 x 19 cm) |
| Weight | 1.5 lbs (0.68 kg) |
| Cooling | Passive convection |
| Control Protocol | DMX512 (3-pin XLR) |
| DMX Channels | 4 or 6 selectable |
| Operating Modes | DMX, Master/Slave, Sound Active, Auto Run |
| Housing Material | Aluminum |
| Lens | High-quality tempered glass |
| IP Rating | IP20 (indoor use only) |
| Mounting | Floor stand or truss via included bracket |
| Included Accessories | Power cord, DMX cable, mounting bracket, manual |
| Maintenance and Cleaning | Wipe with a soft dry cloth; avoid solvents |
| Safety | CE, RoHS compliant; keep away from moisture |
| Spare Parts and Repairability | Contact customer support for replacement LEDs or PCB |
| General Information | Designed for stage, DJ, bar, and mobile lighting |
Frequently Asked Questions - Mini Par RGBW LED Eliminator Lighting
How do I set the DMX address on the Mini Par RGBW LED?
Use the DMX Address menu on the LED display. Press Menu until Addr appears, use Up/Down to set the address, and press Enter to confirm.
Can this fixture operate without a DMX controller?
Yes. Select Auto Run or Sound Active mode for standalone operation. The fixture will cycle through built-in programs or respond to music.
What is the maximum number of units I can daisy-chain?
You can daisy-chain up to 32 units using 3-pin XLR cables with a DMX terminator at the end for best signal integrity.
How do I clean the lens and housing?
Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Do not use abrasive materials or solvents.
Why is the light flickering?
Check the DMX cable connections, ensure the fixture is set to the correct DMX address, and verify that the controller is sending a clean signal. In sound-active mode, adjust the microphone sensitivity.
What is the power supply requirement?
The fixture requires AC 100-240V, 50/60Hz. Use the included power cord. Do not connect to a dimmer pack.
Can I mount this fixture upside down on a truss?
Yes. The included mounting bracket allows overhead mounting. Ensure the fixture is securely clamped and rated for the weight.
How many DMX channels does the fixture use?
It supports 4-channel (RGBW) or 6-channel (RGBW + dimmer + strobe) modes. Select via the Channel menu.
What is the beam angle?
The beam angle is 25 degrees, providing a narrow spotlight effect suitable for highlighting or stage wash.
How do I reset the fixture to factory defaults?
Press and hold the Menu button for 5 seconds while powered on. Select Factory Reset and confirm with Enter.
User questions about Mini Par RGBW LED Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Mini Par RGBW LED - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mini Par RGBW LED by Eliminator Lighting.
USER MANUAL Mini Par RGBW LED Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : Mini Par RGBW LED
Category : Lighting