Beha-Amprobe

AM-520-EUR - Multimeter Beha-Amprobe - Free user manual and instructions

Find the device manual for free AM-520-EUR Beha-Amprobe in PDF.

📄 290 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Beha-Amprobe AM-520-EUR - page 8
Pick your language and provide your email: we'll send you a specifically translated version.
Product typeDigital multimeter
BrandBeha-Amprobe
ModelAM-520-EUR
CategoryMultimeter
Dimensions (L x W x H)180 x 90 x 50 mm
Weight400 g (with battery)
Power supply9V battery type 6LR61
Display6000-count LCD display with backlight
Measurement functionsAC/DC voltage (600V), AC/DC current (10A), resistance (60 MΩ), capacitance (1000 µF), frequency (60 MHz), duty cycle, diode test, continuity, temperature (°C/°F)
Additional featuresAuto-range, data hold, auto power off, non-contact voltage detection (NCV)
Electrical safetyCAT III 600V, CAT IV 300V
Maintenance and cleaningClean with a soft, damp cloth; do not use solvents; replace the battery when the low battery symbol appears
Spare parts and repairabilityStandard 9V battery; replacement fuse (F 0.5A/600V, F 10A/600V); no user-serviceable parts except battery and fuses
General information290-page manual available in multiple languages; 2-year manufacturer's warranty

Frequently Asked Questions - AM-520-EUR Beha-Amprobe

How to measure DC voltage with the Beha-Amprobe AM-520-EUR?
Turn the selector to the V position with the DC symbol (solid line). Connect the black lead to the COM jack and the red lead to the V/Ω/Hz jack. Place the test probes on the circuit terminals. Read the value on the display.
How to change the battery of my multimeter?
Turn off the device and remove the test leads. Unscrew the back compartment screws, remove the cover. Replace the used 9V battery with a new one (type 6LR61). Close the compartment and screw back.
What do the symbols on the selector mean?
The symbols include: V for voltage, A for current, Ω for resistance, -|(- for capacitance, Hz for frequency, -> for diode test, and a speaker symbol for continuity. Refer to the manual for more details.
How to use the continuity function?
Turn the selector to the continuity symbol (buzzer). Connect the leads as for a resistance measurement. If the resistance is less than about 50 Ω, the device emits a beep.
My multimeter displays 'OL', what does it mean?
The display OL (Overload) indicates that the measured value exceeds the selected range or the circuit is open. Select a higher range or check your connections.
Can I measure voltages above 600V?
No, the maximum allowed voltage is 600V AC or DC. Do not exceed this limit to avoid damaging the device and causing injury.
How to maintain the device?
Clean the housing with a soft, damp cloth. Avoid solvents. Replace the battery as soon as the low battery symbol appears. Store the device in a dry, dust-free place.
What to do if the fuse is blown?
Disconnect all leads and turn off the device. Open the back compartment and locate the glass fuse. Replace it with a fuse of the same type: 0.5A/600V for low currents, 10A/600V for the 10A jack. Use a suitable replacement fuse.
The backlight does not work, what to do?
Check that the device is powered on. The backlight is usually activated by pressing the BACKLIGHT or HOLD button for a few seconds. If the problem persists, replace the battery.
How to measure temperature with my AM-520-EUR?
Turn the selector to the °C/°F position. Connect the type K thermocouple (not included) to the COM and V/Ω/Hz jacks. Place the probe on the object to measure. The temperature is displayed in degrees Celsius or Fahrenheit depending on the selection.

User questions about AM-520-EUR Beha-Amprobe

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Multimeter in PDF format for free! Find your manual AM-520-EUR - Beha-Amprobe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AM-520-EUR by Beha-Amprobe.

USER MANUAL AM-520-EUR Beha-Amprobe

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Beha-Amprobe

Model : AM-520-EUR

Category : Multimeter