Go Work POP Wireless - Earphones JLab - Free user manual and instructions
Find the device manual for free Go Work POP Wireless JLab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Earbuds |
| Brand | JLab |
| Model | Go Work POP Wireless |
| Connectivity | Bluetooth 5.0 |
| Battery Life (Earbuds) | Up to 8 hours |
| Battery Life (Case) | Additional 24 hours |
| Charging Time | Approximately 2 hours |
| Driver Size | 8mm |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32 ohms |
| Weight (Per Earbud) | 5g |
| Weight (Charging Case) | 50g |
| Water Resistance | IPX4 (Sweat Resistant) |
| Controls | Touch Sensors |
| Microphone | Built-in |
| Compatibility | iOS, Android, Windows |
| Dimensions (Case) | 6.5 x 4.8 x 2.5 cm |
| Color | Black |
| Special Features | Ear Hooks for Stability, Noise Isolation |
| Maintenance | Clean with a dry cloth; avoid exposure to moisture |
| Safety | Do not use while driving; avoid prolonged listening at high volume |
Frequently Asked Questions - Go Work POP Wireless JLab
How do I pair my JLab Go Work POP Wireless earbuds with my phone?
Ensure the earbuds are charged. Remove them from the case; they automatically enter pairing mode. On your phone, enable Bluetooth and select "Go Work POP Wireless" from the list.
Why is one earbud not working?
Try resetting the earbuds: place both in the case, close the lid for 10 seconds, then reopen. If the issue persists, check for debris in the charging contacts and ensure they are fully charged.
How long does the battery last on a full charge?
The earbuds provide up to 8 hours of playback time. The charging case adds an additional 24 hours, giving a total of up to 32 hours.
Can I use the earbuds while charging?
No, the earbuds cannot be used while charging. You must remove them from the case to use them, and the case charges only when the earbuds are inside.
Are the earbuds water-resistant?
Yes, they have an IPX4 rating, meaning they are resistant to sweat and splashes of water. However, they should not be submerged or exposed to heavy rain.
How do I control music playback and calls?
Use the touch sensors: single tap to play/pause or answer calls, double tap to skip forward, triple tap to go back. Long press for volume control or voice assistant.
Why is the audio cutting out or distorted?
Check that the earbuds are within 10 meters of your device and there are no obstructions. Also, ensure the earbuds are clean and the ear tips fit properly for optimal sound.
Can I use one earbud independently?
Yes, you can use either the left or right earbud alone. Simply remove one from the case and it will connect as a mono headset.
How do I clean the earbuds?
Wipe the earbuds with a soft, dry cloth. For ear tips, remove them and wash with mild soap and water, then dry completely before reattaching. Avoid getting moisture into the charging ports.
What should I do if the earbuds are not charging?
Clean the charging contacts on both the earbuds and case with a dry cotton swab. Ensure the case has battery by checking the LED indicator. If still not charging, try a different USB cable.
User questions about Go Work POP Wireless JLab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Earphones in PDF format for free! Find your manual Go Work POP Wireless - JLab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Go Work POP Wireless by JLab.
USER MANUAL Go Work POP Wireless JLab
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JLab
Model : Go Work POP Wireless
Category : Earphones