JBuddies Studio Wireless - Earphones JLab - Free user manual and instructions
Find the device manual for free JBuddies Studio Wireless JLab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Over-Ear Headphones |
| Brand | JLab |
| Model | JBuddies Studio Wireless |
| Driver Size | 30mm |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32 Ohms |
| Wireless Technology | Bluetooth 5.0 |
| Battery Type | Rechargeable Lithium-Ion |
| Battery Capacity | 300mAh |
| Charging Time | 2 hours |
| Playback Time | Up to 25 hours |
| Weight | 165g |
| Dimensions | 15.5 x 7.0 x 18.5 cm |
| Microphone | Built-in |
| Controls | On-ear buttons for volume, track, and call |
| Safety Feature | Volume limited to 85dB to protect hearing |
| Cleaning | Wipe with a soft dry cloth; do not use liquids |
| Spare Parts | Replacement ear cushions available |
| Repair | Contact JLab support; not user-serviceable |
| Warranty | 1 year limited |
Frequently Asked Questions - JBuddies Studio Wireless JLab
How do I pair my JLab JBuddies Studio Wireless with a device?
Turn on the headphones by pressing and holding the power button for 3 seconds. The LED will flash blue and red, indicating pairing mode. Enable Bluetooth on your device and select 'JBuddies Studio Wireless' from the list.
What is the battery life and how do I charge it?
The headphones offer up to 25 hours of playback. Charge using the included USB-C cable; full charge takes about 2 hours. The LED turns solid green when fully charged.
Are these headphones safe for children?
Yes, they have a built-in volume limiter that caps output at 85dB to protect young ears. Always supervise use and follow the user manual.
Can I use the headphones while charging?
No, it is recommended not to use the headphones during charging to avoid potential damage. Wait until fully charged.
How do I clean the headphones?
Use a soft, dry cloth to wipe the exterior. Do not use water, alcohol, or abrasive cleaners. Remove ear cushions only if needed for gentle cleaning.
What should I do if the headphones won't turn on?
Check if they are charged. If not, connect to a charger for at least 10 minutes. If still no response, try resetting by pressing the power button for 10 seconds.
Can I pair with multiple devices simultaneously?
No, the headphones support a single connection at a time. To switch devices, disconnect from the current device and pair with the new one.
What is the range of the Bluetooth connection?
The Bluetooth range is approximately 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.
Are replacement ear cushions available?
Yes, you can purchase replacement ear cushions from JLab's official website or authorized retailers.
How do I reset the headphones to factory settings?
Press and hold both the volume up and volume down buttons simultaneously for 5 seconds until the LED flashes red then blue. This clears the pairing list and resets the headphones.
User questions about JBuddies Studio Wireless JLab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Earphones in PDF format for free! Find your manual JBuddies Studio Wireless - JLab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JBuddies Studio Wireless by JLab.
USER MANUAL JBuddies Studio Wireless JLab
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JLab
Model : JBuddies Studio Wireless
Category : Earphones