ADI-200 - Uncategorized DAP-Audio - Free user manual and instructions
Find the device manual for free ADI-200 DAP-Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio DI Box / Direct Inject Box |
| Brand | DAP-Audio |
| Model | ADI-200 |
| Dimensions (approx.) | 120 x 70 x 50 mm |
| Weight (approx.) | 0.4 kg |
| Power Supply | Passive (no external power needed) or 48V phantom power |
| Input Connector | 1 x XLR (balanced) or 1/4" jack (unbalanced) |
| Output Connector | 1 x 1/4" jack (unbalanced) or XLR (balanced) |
| Frequency Response | 20 Hz – 20 kHz |
| Signal-to-Noise Ratio | > 90 dB |
| Total Harmonic Distortion | < 0.01% |
| Ground Lift Switch | Yes, to eliminate hum |
| Input Impedance | 1 MΩ (unbalanced) / 10 kΩ (balanced) |
| Output Impedance | 600 Ω (balanced) / 10 kΩ (unbalanced) |
| Housing Material | Aluminum, rugged design |
| Operating Temperature | 0°C – 40°C |
| Included Accessories | User manual, 1/4" to XLR cable (est.) |
| Cleaning Instructions | Wipe with dry cloth; no solvents |
| Safety Precautions | Do not expose to moisture; use only with phantom power up to 48V |
| Spare Parts / Repairability | Contact DAP-Audio support; no user-serviceable parts |
| Certifications | CE, RoHS |
Frequently Asked Questions - ADI-200 DAP-Audio
What is the DAP-Audio ADI-200 used for?
The ADI-200 is a passive direct injection box that converts unbalanced high-impedance signals (e.g., from guitars or keyboards) to balanced low-impedance signals for connection to mixing consoles or audio interfaces.
Does the ADI-200 require external power?
No, the ADI-200 is passive and does not need batteries or external power. It can also be powered by 48V phantom power from a mixer or interface if needed.
What connectors does the ADI-200 have?
It features a female XLR input and a 1/4" jack output (both balanced and unbalanced). Some versions may have additional jacks.
How do I eliminate hum with the ADI-200?
Use the ground lift switch on the unit to break ground loops, which often cause hum in audio systems.
What is the frequency response of the ADI-200?
The frequency response is 20 Hz – 20 kHz, ensuring full audio bandwidth with minimal coloration.
Can I use the ADI-200 with a microphone?
No, the ADI-200 is designed for line-level or instrument-level signals, not for microphones. Use a dedicated mic preamp instead.
How do I clean the ADI-200?
Wipe the unit with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners.
Is the ADI-200 repairable?
There are no user-serviceable parts inside. If damaged, contact DAP-Audio support or an authorized service center.
What is the output impedance of the ADI-200?
The balanced output impedance is 600 Ω, and the unbalanced output impedance is 10 kΩ.
Where can I download the manual for the ADI-200?
The manual is available for free on notice-facile.com in PDF format. You can also request a translation by email.
User questions about ADI-200 DAP-Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ADI-200 - DAP-Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADI-200 by DAP-Audio.
USER MANUAL ADI-200 DAP-Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAP-Audio
Model : ADI-200
Category : Uncategorized