PI6000 PS - Printer KONICA MINOLTA - Free user manual and instructions

Product Type	Monochrome PostScript Printer
Print Technology	Laser, PostScript Level 2
Maximum Resolution	600 dpi
Supported Paper Sizes	Letter, A4, Legal, Ledger, Executive, A3, B4, B5, A5
Default Memory (RAM)	16 MB (expandable)
Recommended Maximum Memory	Approximately 7.7 MB (depending on configuration)
Supported Operating Systems	Windows 95, Windows NT 4.0, Windows 3.1, Mac OS 7.1 and later
Connection Interface	Parallel (LPT1) and Ethernet (Macintosh)
Print Functions	Duplex (two-sided), booklet, stapling, punching, folding, watermark, transparent inserts
Finishing Options	Corner or 2-point stapling, short/long edge punching, half or Z-fold, front/back cover
Font Management	TrueType/PostScript substitution, Type 1, Type 3, Type 42 downloading
Color Management	Grayscale (monochrome printer)
Paper Feed	Tray 1, Tray 2, Tray 3, high-capacity cassette, manual feed, automatic selection
Number of Copies	Up to 999
PostScript Capabilities	Level 2, EPS format, archive, PJL
Maintenance	Clean contacts and paper path as needed; use a quality parallel cable
Security	Sharing settings and permissions under Windows NT; user account management
Spare Parts and Repairability	Contact Konica Minolta after-sales service; optional memory and accessories
General Information	110-page manual, user manual available for free download

Frequently Asked Questions - PI6000 PS KONICA MINOLTA

How to install the printer driver on Windows 95?

Insert the provided CD-ROM, open the Driver\95\AdobePS folder, then run Setup.exe. Accept the license agreement, follow the steps by selecting Minolta Pi6000 PS from the printer list, the LPT1 port, and print a test page to verify installation.

What paper sizes are supported?

The printer supports the following sizes: Letter, A4, Legal, Ledger, Executive, A3, B4, B5, A5. The default size is Letter.

How to print on both sides (duplex)?

In the Paper or Features panel of the driver, select the Duplex printing option. Choose Flip on long edge or Flip on short edge according to the desired binding.

What to do if a PostScript error appears?

Enable the PostScript print error message option in the PostScript panel. This will print an error report. Also check memory and timeout settings.

How to add a watermark to a document?

Open the driver properties, go to the Watermark panel. Click New to create a custom watermark (text, font, size, angle, color). You can print it on all pages or only the first.

Why does the printer not print after installation?

Check that the parallel cable is properly connected and the printer is powered on. Ensure the driver is correctly installed and the LPT1 port is selected. Print a test page from the printer properties.

How to set a number of copies greater than 1?

In the Paper panel (Windows 95) or Layout panel (Windows NT), enter the desired number of copies (1 to 999). Note that some applications may ignore this setting.

Can I use the printer on a network?

Yes, under Windows NT, you can share the printer via the Sharing panel. For Macintosh, use the Chooser and select the printer on the Ethernet network.

How to replace a TrueType font with a printer font?

In the Fonts panel, click Edit the table. Select the TrueType font to replace and choose an equivalent PostScript font from the list. You can also send TrueType fonts as Type 42.

What to do in case of a paper jam?

Open the printer covers and gently remove the jammed paper. Avoid tearing the paper. After clearing the jam, close the covers and reset the printer if necessary. Use quality paper and check the guides.

USER MANUAL PI6000 PS KONICA MINOLTA

Perforation bord court

Perforation bord court

PLEASE READ CAREFULLY THE LICENSE AGREEMENT BELOW BEFORE OPENING THIS PACKAGED SOFTWARE. OPENING THIS PACKAGE INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS BELOW. IF YOU DO NOT AGREE WITH THEM, YOU SHOULD PROMPTLY RETURN THE PACKAGE UNUSED.

1. SOFTWARE

"Software" means the computer program contained in this package (which may include digitally encoded, machine readable, scalable outline font data as encoded in a special format), together with all codes, techniques, software tools, format, design, concepts, methods and ideas associated with the computer program and all documentation related thereto.

2. LICENSE AGREEMENT

This is a license agreement and not an agreement for sale. Minolta owns, or has been licensed from other owners, copyrights in the Software. Except as stated in this Agreement, you are not granted any rights to patents, copyrights, trade names, trademarks (whether registered or unregistered), or any other rights, franchises or licenses in respect of the Software. Title to the Software and any copy made from it is retained by Minolta or such other owners.

3. LICENSE

Minolta, hereby grant to you, and you agree to accept a non-exclusive, non-transferable and limited license and you may:

1. install and use the Software on a single computer and one associated Minolta product.

2. use the Software only for your own customary business or personal purposes.

3. make a copy of the Software for backup or installation purposes only in support of the normal and intended use of the Software.

4. transfer possession of copies of the Software to another party by transferring a copy of this Agreement and all other documentation along with at least one complete unaltered copy of the Software, provided that

(i) you must, at the same time, either transfer to such other party or destroy all your other copies of the Software.

(ii) such transfer of possession terminates your license from Minolta, and
(iii) such other party shall accept and be bound by these license terms by its initial use of the Software.

4. RESTRICTIONS

You shall not without the written consent of Minolta:

(i) use, copy, modify, merge or transfer copies of the Software except as provided herein.
(ii) reverse assemble or reverse compile the Software except as permitted by law; or
(iii) Sublicense, rent, lease or distribute the Software or any copy thereof

1. You shall not export or re-export the Software in any form under violation of export restrictions by the government of your country.

5. LIMITED WARRANTY

Minolta warrants the media on which the Software is recorded to be free from defects in materials and workmanship under normal use. Warranty details and limitations for the Hardware containing the Software are described in the Statement of Limited Warranty which was supplied with the hardware. With the exception of the foregoing express warranties applicable to hardware and media only, the Software is not warranted and is provided "AS IS". SUCH WARRANTY ARE IN LIEU OF ALL OTHER WARRANTYES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

6. LIMITATION OF REMEDIES

IN NO EVENT WILL MINOLTA BE LIABLE FOR ANY LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM USE OR INABILITY TO USE THE SOFTWARE, EVEN IF MINOLTA OR ITS AUTHORISED REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR FOR ANY CLAIM BY YOU BASED ON A THIRD PARTY CLAIM.

7. TERMINATION

You may terminate your license at any time by destroying the Software and all your copies of it or as otherwise described in these terms. Minolta may terminate your license if you fail to comply with these terms. Upon such termination, you agree to destroy all your copies of the Software.

8. GOVERNING LAW

This Agreement shall be governed by the laws of the country where the delivery is made to the original customer.

9. GOVERNMENT END USERS

If you are acquiring the Software on behalf of any unit or agency of the United States Government, the following provisions apply. Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252.227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19(c)(2).

YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORISED REPRESENTATIVES OF EACH PARTY. BY OPENING THE PACKAGE, YOU AGREE TO ACCEPT THE TERMS OF THIS AGREEMENT.