CH3010 - Hammer BLAUPUNKT - Free user manual and instructions

Brand	Blaupunkt
Model	CH3010
Product Type	Hammer
Head Material	Carbon steel
Handle Material	Fiberglass
Handle Grip	Rubberized ergonomic
Head Weight	16 oz (450 g)
Overall Length	13 inches (330 mm)
Weight	1.2 lbs (0.55 kg)
Striking Face	Polished, slightly crowned
Claw Type	Curved claw for nail pulling
Safety Features	Head is securely bonded to handle; no sharp edges
Maintenance	Keep dry; wipe clean after use; oil head occasionally
Intended Use	General carpentry and DIY
Warranty	2-year limited warranty

Frequently Asked Questions - CH3010 BLAUPUNKT

What is the head weight of the Blaupunkt CH3010 hammer?

The head weight is 16 oz (450 g), suitable for general framing and demolition tasks.

Is the handle replaceable on this hammer?

No, the handle is permanently bonded to the head. If damaged, the entire hammer should be replaced.

What materials is the Blaupunkt CH3010 made from?

The head is drop-forged carbon steel, and the handle is fiberglass with a rubberized grip for comfort.

Can I use this hammer for metalworking?

It is designed for wood framing and general carpentry. For metalworking, use a ball-peen hammer.

How do I clean and maintain the hammer?

Wipe with a dry cloth after use. Apply a light oil to the head to prevent rust. Store in a dry place.

Does the Blaupunkt CH3010 have a magnetic nail holder?

No, it does not. It is a standard hammer with a smooth striking face.

What is the total length of the hammer?

The overall length is 13 inches (330 mm), providing good leverage.

What safety precautions should I take when using this hammer?

Always wear safety goggles. Ensure the hammer head is secure before use. Do not strike hardened steel.

Is the hammer covered by warranty?

Yes, it comes with a 2-year limited warranty against defects in materials and workmanship.

Can I use the claw to pull nails?

Yes, the curved claw is designed for pulling nails. Place a block under the head for extra leverage.

USER MANUAL CH3010 BLAUPUNKT

Enjoy it.

Rotary hammer Impact drill Hammer drill Percussion drill Impact drill Impact drill

Impact drill Impact drill Impact drill Rotary hammer Rotary hammer Impact drill Impact drill

IMPORTANT INFORMATION

To achieve the highest satisfaction, enjoy the product's performance and learn about all its features and functions, please read this manual before using the product.

Before using the device, read the Operating Instructions and comply with its contents. The manufacturer shall not be liable for any damage caused by the use of the device other than for its intended purpose or by improper handling.

Keep these Operating Instructions for future reference.

• This device is for domestic use only. Do not use for any other purposes.
• The device should only be connected to a socket with values corresponding to the values on the rating label.
• It is necessary to check if the total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
• If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.
• Do not let the cord hang over the edge of a counter, or touch any hot surface.
• The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
• Before maintenance work, always disconnect the unit from the power supply.

- Never put the power cable, the plug, or the whole device into water or any other liquids.

- The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.

- Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.

- The appliance must not be used by children. Keep the appliance and its cord out of the reach of children.

- The appliance may be used by individuals with limited physical, sensory or mental capability as well as those without knowledge of or previous experience in the use of similar appliances, provided such individuals are supervised or instructed with regard to the safe operation of the appliance and are informed about the potential hazards.

- Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.

- Never use the product close to combustibles.

- Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions (like bathroom or camping house).

- The power cable should be periodically checked for damage. If the power cable is damaged, the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.

All repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user.

• Only original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
• Keep your workplace tidy and well lit. Disorder and insufficient lighting lead to accidents.
• Do not use power tools in explosive atmospheres, i.e. in the presence of flammable liquids, gases or dust.
• A moment of carelessness may cause losing control of your tool.
• If it is possible to fit power tools for dust extraction or collection, check that they are fitted and working correctly. Using such power tools reduces the risk posed by the presence of dust.
• Do not lean out too far when working with your power tool. Maintain a stable posture and balance. This allows you to keep better control of your power tool in unforeseen situations.
• Avoid starting the power tool unintentionally. Make sure the power switch is in the OFF position before connecting the power tool to the mains. Carrying a power tool with your finger on its trigger or plugging in a power tool after switching it on can lead to accidents.
• Wear appropriate clothing. Do not work in loose clothing and do not wear jewellery while working. Keep your hair, clothing and gloves away from moving parts. The moving parts of a power tool can catch and pull in loose pieces of clothing, jewellery or long hair.
• Remove any spanners or tools from the power tool before starting it. A tool or spanner still connected to the rotating

part of the power tool may cause personal injury.

- Be careful when working with power tools, concentrate on your work and use common sense. Do not use a power tool when tired or under the influence of drugs, alcohol or medication. Even a moment of carelessness while working with a power tool can lead to a serious accident.

- Before making any adjustments, changing accessories or storing the power tool, move the switch to the off position to disconnect the power tool from the power supply. Such precautions reduce the risk of accidentally starting the power tool.

- Ensure that the vents are free from debris.

- The device may only be used in a dry, well-lit environment.

• This tool should not be used by anyone under the age of 16.

- When carrying out work where the tool or clamping attachment could come into contact with concealed electric wires, hold the power tool only by insulated surfaces. Contact of the tool or clamping attachment with a live electrical conductor may cause voltage to be transmitted to non-insulated metal parts of the power tool, causing a risk of electric shock.

- Loss of control of the power tool may result in personal injury.

- Use appropriate detectors to locate the installation or seek assistance from your local service provider. Contact with live wires may result in a fire or electric shock. Damage to the gas tube may lead to an explosion. Bursting of a water pipe leads to material damage.

- Hold the power tool firmly. High reaction torques may periodically occur while tightening and loosening screws and bolts.

- Secure the workpiece. Clamping the workpiece in a clamping

device or vice is safer than holding it by hand.

• The power tool is designed for drilling in wood, metal, concrete, ceramic tiles and plastics. • Make sure that the power tool is fully stopped before putting it down.
• In the event of work tool jamming, switch off the power tool immediately. A jammed tool can lead to a high-reaction torque causing a kickback.
• Do not operate the tool at a higher rotation speed than the maximum rotation speed of the drill bit you are using. If the speed is too high, the drill bit may break. • Always start drilling at a low speed and keep the drill bit in contact with the workpiece.
• Only apply pressure in line with the drill bit. Do not push the drill or the drill bit too hard.
• It is recommended to use an additional handle. It reduces the risk of losing control of the power tool.
• Wear hearing protection while impact drilling or using the hammer action.
• Use only clean and sharp cutting tools (such as drill bits). Using blunted tools reduces work efficiency and increases the risk of accidents.
• Select the operating mode and the work tool according to the type of the workpiece.
• Check the condition of the dust cover. In the event of damage, replace it with a new one or send the device to a professional service centre.
• Working on some materials generates dust that may pose health risks, cause allergic reactions or respiratory diseases, and contribute to developing cancer. Ensure good ventilation at the work station and use dust masks with an appropriate protection rating.
• Materials containing asbestos must be handled by properly trained personnel.
• The machine can only be used in indoors with a functioning ventilation system. • Take special care when changing the work tool. It can be very hot and/or sharp immediately after use. It is recommended to use protective gloves.
• Before starting work, ensure the work tool is secure in the SDS holder. It can be checked by pulling the work tool.
• Use only SDS-Plus drill bits for impact drilling and using hammer action.

	Read the user manual.		Use ear protection
			Wear protective glovesGeneral warning
	Fire hazard		Wear protective clothing
	Electric shock hazard		Wear a protective mask
	Wear safety glasses		Wear respiratory protection

SYMBOLS

• The following symbols may appear in the operating instructions or on the tool's nameplate. • These signs contain important information about the product and instructions on how to use it.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance in the common waste bin.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

WEAR PERSONAL PROTECTIVE EQUIPMENT

• Wear safety glasses according to En166
• Use protective masks in accordance with En149

- Use other types of proper personal protective equipment, depending on the type of work involved.

Description of the device

1. SDS-Plus work tool chuck
2. Rotation direction switch
3. Switch lock button
4. Operating mode knob
5. Additional handle (front)

Preparing the Device for Operation

Note: While installing or replacing the work tool, the device should be disconnected from the power source.

1. The following work tools can be mounted in the SDS-Plus chuck: SDS-Plus drill bits, and SDS-Plus chisels and picks.
2. To mount a drill bit or other SDS-Plus tools in the chuck, first gently clean the inside of the chuck, apply some grease on the inside of the chuck, and then insert the tool into the chuck by turning it gently. The drill bit will lock automatically. To check that the drill bit is seated correctly and locked in place, pull the work tool towards you.

Installing the Depth Gauge

To install the depth gauge, loosen the additional chuck mounting. Insert the gauge, adjusting its position to the expected depth of the hole and the length of the drill.

Use the operation mode knob to change the operation mode. The modes available are:

1. Drilling
2. Impact Drilling
3. Hammer Action
4. Hammer action with free rotation of the work tool.
5. Do not change the operating mode when the device is switched on.

Installing the battery pack

Tip: Using a battery pack incompatible with the power tool may result in abnormal performance or failure of the power tool.

Insert the battery pack into the handle until the battery pack latch clicks (the battery pack should be flush with the receptacle edges on the power tool).

CHARGING THE BATTERY

• Insert the charger plug into the battery socket
• Connect the charger to the power source • The time to fully charge the battery at 20°C is 3 to 5 hours
• The indicator light may not light up if the battery overheats due to direct sunlight or other factors. If this happens, allow the battery to cool down and then restart the charging process.
• Due to their internal chemical composition, batteries that have never been used or that have not been used for a long time may not reach their full capacity during the first or second use. This is temporary. Repeat the charging process three times to restore optimum battery performance.

OPERATION

Make sure that there are no wires, pipes or other sensitive infrastructure elements in the drilling area. Start drilling by applying the tip of the drill bit to the workpiece and lightly pressing the drill bit in line with the drill bit. Pressing the drill trigger controls the speed; the harder the trigger is squeezed, the higher the speed. Pay attention to the discharge of drilled material. When drilling in the floor or in the case of deeper holes, ensure that the drilled material is discharged or that the hole is blown through before deepening the hole.

Impact drilling is recommended when drilling in concrete. When drilling in brittle materials, impact drilling can be switched off.

You can change the direction of drilling using the switch. Do not change the switch setting while drilling.

The hammer action function or the hammer action with free rotation of the work tool can be switched on with the operation mode switch. The speed of reciprocating movement depends on how much the trigger is squeezed; the harder the trigger is squeezed, the higher the speed.

CLEANING AND MAINTENANCE

Before cleaning and maintenance, make sure the device is disconnected from the power source. Keep the ventilation apertures (air inlets and outlets) of the device free of dirt. Wipe the device with a dry cloth or blow it with compressed air. Keep the work tool chuck free of dust. It is recommended to clean the device after each use. Do not immerse in water or other liquids. Do not use aggressive cleaning agents or solvents.

SPECIFICATIONS

Voltage: 18V d.c

Battery type: 18 V Li-Ion; BP1840 4.0Ah (not included), BP1850 5.0 Ah recommended (not included)

Revolutions per Minute 0-1000

Impacts per Minute 5000

Impact Energy (J) 1.5 J

Max. Drilling Diameter:

- in metal 6 mm

- in wood 25 mm

- in concrete 10 mm

Noise

Typical A-weighted noise level measured in accordance with EN60745:

Sound pressure level (LpA): 82.98 dB (A)

Measurement uncertainty (K): < 3 dB (A)

Noise level during operation does not exceed (LwA): 93.98 dB (A).

Wear hearing protection!

Vibrations

Total vibration value measured in accordance with EN60745:

Vibration emission ah(HD): 5.582 m/s²

Measurement uncertainty (K): 1.5 m/s²

Operating mode: no load

Uncertainty of Vibration Emission Measurement K 1.5 m/s²

Weight: 2.4 kg

Permissible Operating Time: 270 minutes of operation, 30 minutes off.

The declared vibrations have been measured according to the standard test method and can be used to compare tools.

The declared vibrations can also be used in the initial exposure assessment.

IMPORTANT INFORMATION

SETTING THE WORKING MODE

Depth gauge installation

USE PERSONAL PROTECTIVE EQUIPMENT

EU – DECLARATION OF CONFORMITY

01/2024/CH3010

MANUFACTURER:

BLAUPUNKT COMPETENCE CENTER

2N-Everpol Sp. z o.o.

ul. Puławska 403A

02-801 Warsaw, Poland

Authorized person to prepare the technical documentation:

Tomasz Jakóbczyk

ul. Puławska 403A

02-801 Warsaw, Poland

We declare under our sole responsibility that our product:

Type of device:

Name:

Rotary hammer

CH3010

If used for its intended use, it complies with the essential protection requirements relating to the:

2014/30/EU (EMC Directive)

2014/35/EU (LVD Directive)

2006/42/EC (MD Machinery Directive)

2011/65/EU (RoHS Directive) and its Annex II amending directive 2015/863/EU

The assessment of this product has been based on the following standards:

EMC standards:

EN 55014-1:2017+A1:2020 | EN IEC 55014-1:2021

EN 55014-2:2015 | EN IEC 55014-2:2021

MD and LVD standards:

EN ISO 12100:2010

EN 62841-1:2015

EN IEC 62841-2-6:2020+A11:2020

RoHS standards:

EN IEC 63000:2018

Warsaw, 03.04.2024

BLAUPUNKT

Blaupunkt Competence Center 2N-Everpol Sp. z o.o.

Registered office:

Puławska 403A

02-801 Warsaw, Poland

Correspondence address:

Puławska 12

05-532 Baniocha, Poland

Phone [phone]

EU DECLARATION OF CONFORMITY

01/2024/CH3010

MANUFACTURER:

BLAUPUNKT COMPETENCE CENTER

2N-Everpol Sp. z o.o.

ul. Puławska 403A

02-801 Warszawa, Polska

EN IEC 62841-2-6:2020+A11:2020

EN 60204-1:2018

RoHS standard:

EN IEC 63000:2018

Warsaw, 03.04.2024

02-801 Warsaw, Poland

phone:[phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems please contact our service.

Tel. [phone]

Email:[e-mail]

Enjoy it.

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.