HY50 - Water pump HYUNDAI - Free user manual and instructions
Find the device manual for free HY50 HYUNDAI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Model | HY50 |
| Brand | Hyundai |
| Power | 750 W |
| Voltage | 220-240 V, 50 Hz |
| Max Flow Rate | 50 L/min |
| Max Head | 30 m |
| Inlet/Outlet Size | 1 inch |
| Housing Material | Cast Iron |
| Impeller Material | Stainless Steel |
| Dimensions (L x W x H) | 30 x 20 x 25 cm |
| Weight | 10 kg |
| Protection Class | IPX4 |
| Thermal Protection | Yes |
| Self-Priming | Yes |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Clean filter regularly |
| Safety Features | Do not run dry; use earth leakage breaker |
| Spare Parts Availability | From authorized service centers |
| Warranty | 2 years |
Frequently Asked Questions - HY50 HYUNDAI
How to install the Hyundai HY50 water pump?
Place the pump on a stable, flat surface near the water source. Connect the suction pipe to the inlet and discharge pipe to the outlet. Ensure all connections are tight. Fill the pump casing with water for priming. Plug into a grounded outlet with earth leakage protection.
What is the maximum suction height of the HY50?
The maximum suction height is 8 meters. For optimal performance, keep suction lift below 6 meters.
Can the HY50 pump dirty or muddy water?
No, this pump is designed for clean water only. Using it with dirty water can damage the impeller and reduce lifespan.
How do I prime the HY50 pump?
Remove the priming plug at the top of the pump. Pour clean water into the cavity until full. Replace the plug securely. The pump is now primed and ready to start.
Why is the pump not turning on?
Check power supply and circuit breaker. Ensure thermal protection hasn't tripped (let it cool). Verify that the impeller is not jammed. If problem persists, consult a technician.
How to clean the HY50 pump?
Disconnect power. Remove inlet filter and clean with water. Flush pump interior with clean water. Do not use chemicals. Reassemble after drying.
What fluids can the HY50 pump handle?
Only clean water free of solids, oils, or corrosive substances. Temperature range: 0-40°C.
Does the pump have built-in thermal protection?
Yes, the HY50 includes a thermal overload protector that automatically shuts off the motor if it overheats. It resets when cooled.
Where can I find spare parts for the HY50?
Original spare parts are available at Hyundai authorized service centers. Use only genuine parts to maintain warranty.
How to winterize the pump?
Drain all water from the pump and pipes. Store in a dry, frost-free place. Remove and store inlet filter separately.
User questions about HY50 HYUNDAI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual HY50 - HYUNDAI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HY50 by HYUNDAI.
USER MANUAL HY50 HYUNDAI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HYUNDAI
Model : HY50
Category : Water pump