PI1800 - Printer KONICA MINOLTA - Free user manual and instructions

Product Type	Printer controller for Minolta Di181 digital copier
Print Resolution	600 x 600 dpi
Print Speed	18 pages per minute (ppm)
Interface	IEEE 1284 (Type B parallel port)
Installed RAM Memory	8 MB
Supported Paper Formats	A3, A4, A5, B4, B5, envelopes (C5, DL, COM10, Monarch), custom (100 x 148 mm to 297 x 431.8 mm)
Paper Sources	Manual bypass tray, 1st tray, 2nd tray, 3rd tray, 4th tray
Compatible Operating Systems	Windows 95, Windows 98, Windows NT 4.0
Command Type	GDI (original)
Certifications	CE marking (safety EN 60950, laser EN 60825-1, EMC EN 55022/55024)
Main Functions	Local and network printing, driver settings (format, orientation, copies, order, resolution, brightness, gamma, compression, pattern)
Maintenance and Cleaning	Refer to the Di181 copier manual for cleaning procedures
Common Troubleshooting	Error messages: load paper, format error, missing format, no cassette; solutions in the manual

Frequently Asked Questions - PI1800 KONICA MINOLTA

How to install the PI1800 printer driver?

Insert the supplied CD-ROM into the drive. The installation program starts automatically. Follow the instructions. If it does not start, run Minolta.exe from the CD. The 'Minolta Pi1800' icon appears in the Printers folder.

What to do if printing does not start?

Check that the copier is on, the interface cable (parallel) is properly connected, and automatic standby mode is not active. If the printer LED flashes, press the [PRINTER MENU] key to display the error message.

How to cancel a current print job?

Press the [PRINTER MENU] key on the copier. The screen displays the status. Press [0] to cancel the current job, or [1] to cancel all jobs and reset.

What does the message 'Load paper' mean?

The selected paper source is empty. Load paper of the appropriate size into the indicated tray. Printing resumes automatically.

How to set paper size in the driver?

Under Windows 95/98: go to Settings > Printers, right-click 'Minolta Pi1800', Properties, Paper tab. Select the desired size (A4, A3, custom, etc.). Under Windows NT 4.0: use the Paper/Output tab.

How to adjust print brightness?

In the printer driver, Graphics tab (Windows 95/98) or Document Options (Windows NT 4.0). Move the slider towards 'Darker' or 'Lighter' (95/98) or set the value between -64 and +64 (NT 4.0). The default value is center position (0).

Can I use the manual bypass tray?

Yes. In the printer driver, under 'Paper Source', select 'Manual Bypass Tray'. Load a sheet individually into the designated tray.

How to resolve the 'Missing format' error?

The paper size defined in the driver is not available in any source. Load paper of the correct size into one of the trays. You can ignore the error by pressing [1] to continue with the available paper.

Which operating systems are supported?

The PI1800 printer driver is compatible with Windows 95, Windows 98, and Windows NT 4.0. Later versions of Windows are not officially supported.

How to reset the printer after an error?

Press the [PRINTER MENU] key. If a job is waiting, press [0] to clear the job, then [1] to reset. If no job, press [0] to reset directly.

USER MANUAL PI1800 KONICA MINOLTA

Format absent ^2 LTR

0:EFFACER 1:CONTIN.

End-user Licence Agreement (GB)

PLEASE READ CAREFULLY THE LICENCE AGREEMENT BELOW BEFORE OPENING THIS PACKAGED SOFTWARE. OPENING THIS PACKAGE INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS BELOW. IF YOU DO NOT AGREE WITH THEM, YOU SHOULD PROMPTLY RETURN THE PACKAGE UNUSED.

1. Software

"Software" means the computer program contained in this package (which may include digitally encoded, machine readable, scalable outline font data as encoded in a special format), together with all codes, techniques, software tools, format, design, concepts, methods and ideas associated with the computer program and all documentation related thereto.

2. Licence Agreement

This is a licence agreement and not an agreement for sale. Minolta owns, or has been licensed from other owners, copyrights in the Software. Except as stated in this Agreement, you are not granted any rights to patents, copyrights, trade names, trademarks (whether registered or unregistered), or any other rights, franchises or licences in respect of the Software. Title to the Software and any copy made from it is retained by Minolta or such other owners.

3. LICENCE

Minolta, hereby grant to you, and you agree to accept a non-exclusive, non-transferable and limited licence and you may:

(1) install and use the Software on a single computer and one associated Minolta product.
(2) use the Software only for your own customary business or personal purposes.
(3) make a copy of the Software for backup or installation purposes only in support of the normal and intended use of the Software.
(4) transfer possession of copies of the Software to another party by transferring a copy of this Agreement and all other documentation along with at least one complete unaltered copy of the Software, provided that (i) you must, at the same time, either transfer to such other party or destroy all your other copies of the Software. (ii) such transfer of possession terminates your licence from Minolta, and (iii) such other party shall accept and be bound by these licence terms by its initial use of the Software.

4. RESTRICTIONS

(1) You shall not without the written consent of Minolta:
(i) use, copy, modify, merge or transfer copies of the Software except as provided herein. (ii) reverse assemble or reverse compile the Software except as permitted by law; or (iii) Sublicence, rent, lease or distribute the Software or any copy thereof.
(2) You shall not export or re-export the Software in any form under violation of export restrictions by the government of your country.

5. LIMITED WARRANTY

Minolta warrants the media on which the Software is recorded to be free from defects in materials and workmanship under normal use. Warranty details and limitations for the Hardware containing the Software are described in the Statement of Limited Warranty which was supplied with the hardware. With the exception of the foregoing express warranties applicable to hardware and media only, the Software is not warranted and is provided "AS IS". SUCH WARRANTY ARE IN LIEU OF ALL OTHER WARRANTYES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

6. LIMITATION OF REMEDIES

IN NO EVENT WILL MINOLTA BE LIABLE FOR ANY LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM USE OR INABILITY TO USE THE SOFTWARE, EVEN IF MINOLTA OR ITS AUTHORISED REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR FOR ANY CLAIM BY YOU BASED ON A THIRD PARTY CLAIM.

7. TERMINATION

You may terminate your licence at any time by destroying the Software and all your copies of it or as otherwise described in these terms. Minolta may terminate your licence if you fail to comply with these terms. Upon such termination, you agree to destroy all your copies of the Software.

8. GOVERNING LAW

This Agreement shall be governed by the laws of the country where the delivery is made to the original customer.

9. GOVERNMENT END USERS

If you are acquiring the Software on behalf of any unit or agency of the United States Government, the following provisions apply. Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at

FAR 252.227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19(c)(2).

YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORISED REPRESENTATIVES OF EACH PARTY. BY OPENING THE PACKAGE, YOU AGREE TO ACCEPT THE TERMS OF THIS AGREEMENT.

4. Les restrictions.