AP272 - Vacuum Cleaner Vacmaster - Free user manual and instructions
Find the device manual for free AP272 Vacmaster in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Vacuum cleaner |
| Dimensions (L x W x H) | 350 x 300 x 400 mm |
| Weight | 5.5 kg |
| Power supply | Mains, 220-240 V, 50/60 Hz |
| Nominal power | 1200 W |
| Tank capacity | 5 L |
| Filtration | Washable HEPA filter |
| Noise level | 75 dB |
| Power cord length | 6 m |
| Operating radius with hose and extension | 8 m |
| Included accessories | Flat crevice tool, fabric brush, furniture nozzle |
| Main functions | Powerful suction, cyclonic filtration, electronic power regulation |
| Care and cleaning | Regular filter cleaning, tank emptying, hose inspection |
| Safety | Automatic shut-off in case of overheating, thermal protection |
| Spare parts and repairability | Replacement filter, tank, power cable |
| General information | 2-year warranty, manufactured according to CE standards |
Frequently Asked Questions - AP272 Vacmaster
How to use the Vacmaster AP272 vacuum cleaner?
Plug in the device, press the on/off button. Use the power adjustment knob to adapt the suction. For liquid suction, remove the HEPA filter and use the supplied foam filter.
How to clean the HEPA filter?
Unclip the filter, tap it to remove dust, then wash it with warm soapy water. Let it dry for 24 hours before reassembly.
What to do if the vacuum cleaner loses power?
Check that the tank is not full, the filter is not clogged, and the hose is not blocked. Clean or replace the filter if necessary.
How to empty the tank?
Unlock the tank by pressing the latch, remove it and empty its contents into a trash bin. Rinse with clean water if necessary.
The vacuum cleaner gets very hot, is this normal?
Slight heating is normal. If the heat is excessive, the thermal cut-off will activate. Let it cool for 30 minutes before restarting. Check that the filters are not blocked.
Can I use dust bags?
No, the Vacmaster AP272 is a bagless vacuum with a cyclonic tank. Use the supplied HEPA filter and foam filter.
How to replace the filter?
Purchase a compatible replacement filter (ref. VF200). Open the filter compartment, remove the old filter, insert the new one. Close the compartment.
The vacuum cleaner is making noise, what to do?
Abnormal noise can be caused by an obstruction or a dirty filter. Check the hose and filters. If the noise persists, contact customer service.
Where to find spare parts?
Check the official Vacmaster website or authorized dealers. You can order online: filter, tank, hose, etc.
The device won't turn on, possible causes?
Check the plug and power cord. Make sure the tank is properly engaged (safety). If the problem persists, the thermal switch may be triggered: let it cool down.
User questions about AP272 Vacmaster
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual AP272 - Vacmaster and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP272 by Vacmaster.