SV-800.1 - Uncategorized KOSPEL - Free user manual and instructions
Find the device manual for free SV-800.1 KOSPEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Vertical electric water heater |
| Brand | Kospel |
| Model | SV-800.1 |
| Capacity | 800 liters |
| Dimensions (H x W x D) | 1800 x 800 x 800 mm |
| Weight | 150 kg |
| Power supply | 400 V three-phase, 50 Hz |
| Power | 12 kW |
| Maximum pressure | 6 bar |
| Maximum water temperature | 75 °C |
| Main features | Adjustable thermostat, anti-freeze protection, temperature indicator, reinforced thermal insulation |
| Care and cleaning | Clean the exterior with a non-abrasive damp cloth. Descaling of the heating element recommended every 2 years |
| Safety | Overheat protection, IP24 protection, safety valve included |
| Spare parts | Thermostat, heating element, flange gasket, magnesium anode |
| Repairability | Repairability index 7.2/10 (according to French regulations) |
| Installation | Wall-mounted or floor-standing, cold water and hot water connection 1 inch |
| Tank material | Enamelled steel with anti-corrosion protection |
| Warranty | 5 years on the tank, 2 years on components |
| Energy | Electricity, energy class A |
Frequently Asked Questions - SV-800.1 KOSPEL
How to set the temperature of the Kospel SV-800.1 water heater?
Use the thermostat adjustment knob located on the front panel. Turn it to select the desired temperature, usually between 45°C and 65°C for domestic use.
What to do in case of a water leak?
Immediately cut off the power supply and water inlet. Check the connections and the safety valve. If the leak persists, contact a professional.
How to descale the water heater?
Drain the appliance, remove the heating element and clean it with a suitable descaling agent. Rinse thoroughly before reassembling. It is recommended to call a professional every 2 years.
What is the power consumption of the SV-800.1?
The power is 12 kW, which corresponds to approximately 12 kWh per hour of operation at full power. Actual consumption depends on frequency of use and set temperature.
How to replace the magnesium anode?
Disconnect the power, drain the water heater, remove the old anode and install the new one. Check the condition every 2 years and replace if necessary.
The water heater makes an abnormal noise, what to do?
A noise may indicate limescale buildup. Perform descaling. If the noise persists, check the heating element and contact a professional.
How to drain the water heater?
Cut off the power supply and water inlet. Open the nearest hot water tap to let air in. Connect a hose to the drain and open the drain valve.
What is the recommended working pressure?
The working pressure is 6 bar maximum. Ensure the safety valve operates correctly. If pressure exceeds, install a pressure reducer.
How to activate the anti-freeze protection?
Anti-freeze protection is automatic. The water heater maintains a minimum temperature of around 5°C to prevent freezing. Ensure the power is connected.
Can I install the SV-800.1 outdoors?
The appliance is designed for indoor use. The IP24 rating allows outdoor installation under shelter, but avoid direct exposure to rain or frost.
User questions about SV-800.1 KOSPEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SV-800.1 - KOSPEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SV-800.1 by KOSPEL.
USER MANUAL SV-800.1 KOSPEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KOSPEL
Model : SV-800.1
Category : Uncategorized