SC-08 - Uncategorized Chauvet - Free user manual and instructions
Find the device manual for free SC-08 Chauvet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Effect Light / Strobe |
| Brand | Chauvet |
| Model | SC-08 |
| Dimensions | 10 x 8 x 6 inches (25.4 x 20.3 x 15.2 cm) |
| Weight | 5.0 lb (2.3 kg) |
| Power Supply | AC 100-240V, 50/60 Hz |
| Power Consumption | 35 W |
| Light Source | 8x White LEDs |
| DMX Channels | 2 or 4 selectable |
| Control Modes | DMX, Sound Active, Master/Slave |
| Strobe Rate | 0-20 Hz |
| Beam Angle | 30 degrees |
| Housing | Metal, black finish |
| Cooling | Passive ventilation |
| Mounting | Floor standing or hanging bracket |
| Operating Temperature | 40°F - 95°F (5°C - 35°C) |
| Maintenance | Clean with a soft, dry cloth |
| Safety | Use on stable surface; avoid water exposure |
| Spare Parts | Fuse replacement (type F 2A 250V) |
| Repairability | Service by qualified technician only |
| Included Items | Power cord, mounting bracket, user manual |
Frequently Asked Questions - SC-08 Chauvet
How do I connect the SC-08 to a DMX controller?
Connect a DMX cable from the controller's output to the DMX In port on the SC-08. Set the DMX address using the DIP switches on the back. Refer to the manual for addressing details.
How do I reset the SC-08 to factory defaults?
To reset, power off the unit, hold the Menu button while powering on, and continue holding until the display shows 'reset'. Release the button.
What is the correct way to clean the SC-08?
Use a soft, dry cloth to wipe the housing and lens. Do not use abrasive cleaners or liquids. For stubborn dirt, lightly dampen the cloth with water.
Can the SC-08 be used outdoors?
No, the SC-08 is designed for indoor use only. Exposure to rain, moisture, or extreme temperatures may damage the unit.
How do I replace the fuse?
Unplug the unit. Locate the fuse holder near the power input. Use a screwdriver to open it. Replace the blown fuse with a 2A 250V fast-acting fuse of the same type.
Why is the SC-08 not responding to sound?
Ensure the unit is in Sound Active mode (set via menu). Check that the internal microphone is not blocked. Adjust the sound sensitivity level in the settings menu.
What is the maximum number of units in Master/Slave mode?
You can daisy-chain up to 32 SC-08 units in Master/Slave mode. The first unit acts as master, and the rest as slaves via DMX cables.
How do I update the firmware?
Firmware updates are not user-serviceable. Contact Chauvet support for assistance if needed.
Does the SC-08 come with a warranty?
Yes, the SC-08 comes with a limited 2-year warranty. Keep your receipt for service requests.
What should I do if the unit overheats?
Power off immediately and allow it to cool. Ensure proper ventilation around the unit. Reduce ambient temperature if necessary. If the problem persists, contact support.
User questions about SC-08 Chauvet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SC-08 - Chauvet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC-08 by Chauvet.
USER MANUAL SC-08 Chauvet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chauvet
Model : SC-08
Category : Uncategorized