SDBT-MSX-1L-PU-E-2.5-N-LE - Sensor Festo - Free user manual and instructions
Find the device manual for free SDBT-MSX-1L-PU-E-2.5-N-LE Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Magnetic Cylinder Sensor |
| Model | SDBT-MSX-1L-PU-E-2.5-N-LE |
| Brand | Festo |
| Dimensions (L x W x H) | 27 mm x 8 mm x 8 mm |
| Weight | Approx. 20 g |
| Supply Voltage | 10 ... 30 V DC |
| Switching Output | NPN, normally open |
| Cable Length | 2.5 m |
| Electrical Connection | 3-wire cable with open ends |
| Switching Frequency | 1 kHz |
| Ambient Temperature | -25 ... 70 °C |
| Protection Class | IP67 |
| Housing Material | PA6 plastic |
| Mounting | T-slot (slot nut) |
| LED Indicator | Yes, yellow when output active |
| Reparability | Not repairable; replace unit |
| Cleaning | Wipe with damp cloth; avoid solvents |
| Safety | Observe voltage limits; avoid mechanical shock |
| Spare Parts | No spare parts; complete sensor replacement |
| Application | Position sensing on pneumatic cylinders |
Frequently Asked Questions - SDBT-MSX-1L-PU-E-2.5-N-LE Festo
How do I wire the Festo SDBT-MSX-1L-PU-E-2.5-N-LE sensor?
The sensor has a 3-wire cable: brown for +V (10-30V DC), blue for GND, and black for the NPN output.
What is the output type of this sensor?
It has an NPN output, normally open (NO). The output switches to GND when a magnetic field is detected.
Can I use this sensor with a PLC?
Yes, it is compatible with 24V DC PLC inputs. Connect the black wire to the PLC input and use a common GND.
What is the sensing range of the SDBT-MSX?
The sensing range depends on the magnet strength and orientation, typically up to 60 mm with standard Festo cylinder magnets.
How do I mount the sensor on a cylinder?
Insert the sensor into the T-slot of the cylinder. Use the included screw to secure it at the desired position.
What does the LED indicator mean?
The yellow LED turns on when the sensor detects a magnetic field and the output is active.
Is the sensor suitable for washdown environments?
It has IP67 protection, so it is dust-tight and can withstand temporary immersion. However, avoid high-pressure sprays.
How can I test if the sensor is working?
Apply power (10-30V DC) and bring a magnet near the sensing face. The LED should light and the output should switch to GND.
What is the cable type and length?
The sensor comes with a 2.5 m long, 3-wire PVC cable with stripped ends for flexible connection.
Is this sensor interchangeable with other Festo models?
Yes, it shares the same T-slot mounting and electrical characteristics as other Festo SDBT sensors, making it a direct replacement.
User questions about SDBT-MSX-1L-PU-E-2.5-N-LE Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sensor in PDF format for free! Find your manual SDBT-MSX-1L-PU-E-2.5-N-LE - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDBT-MSX-1L-PU-E-2.5-N-LE by Festo.
USER MANUAL SDBT-MSX-1L-PU-E-2.5-N-LE Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : SDBT-MSX-1L-PU-E-2.5-N-LE
Category : Sensor