Presario w220q - Monitor HP - Free user manual and instructions

Product Type	LCD Monitor
Brand	HP
Model	Presario w220q
Display Diagonal	22 inches
Aspect Ratio	16:10
Native Resolution	1680 x 1050
Contrast Ratio (Typical)	1000:1
Brightness (Typical)	300 cd/m²
Response Time	5 ms
Horizontal Viewing Angle	170°
Vertical Viewing Angle	160°
Video Input	VGA, DVI-D (with HDCP)
Power Consumption (Typical)	50 W
Power Consumption (Standby)	< 2 W
With Stand Dimensions (W x H x D)	20.1 x 16.5 x 8.3 inches
Weight (with Stand)	5.7 kg (12.6 lbs)
VESA Mounting	100 x 100 mm
Color	Black
On-Screen Display Languages	Multiple (including English, Spanish, French, etc.)
Removable Stand	Yes
Manufacturer Warranty	1 year limited

Frequently Asked Questions - Presario w220q HP

How do I adjust the brightness on my HP Presario w220q monitor?

Press the menu button on the front bezel, then use the arrow keys to navigate to 'Brightness' and adjust using the + or - buttons.

What is the native resolution of the HP Presario w220q?

The native resolution is 1680 x 1050 at 60 Hz.

How can I clean the screen of my monitor?

Use a soft, dry microfiber cloth. If needed, slightly dampen with water (distilled). Do not use alcohol or ammonia-based cleaners.

The monitor shows 'Out of Range' - what does that mean?

This indicates the input signal is outside the supported resolution or refresh rate. Set your computer to 1680x1050 @ 60 Hz.

Does the HP Presario w220q support VESA mounting?

Yes, it has a standard 100 x 100 mm VESA mount pattern.

How do I restore factory settings?

Press the menu button, go to 'Setup' or 'Reset', then select 'Factory Reset' and confirm.

What cables are included with the monitor?

Typically, a VGA cable and a power cord are included. A DVI cable may not be included.

Why is there no sound from my monitor?

This monitor does not have built-in speakers. Audio must be played through separate speakers or headphones connected to the computer.

Can I use the monitor with a Mac?

Yes, it is compatible with Macs that have VGA or DVI output. You may need an adapter.

How do I adjust the vertical position of the image?

Use the menu to find 'Image Position' (or similar), then adjust using the arrow keys.

USER MANUAL Presario w220q HP

W220q LCD Monitor User's Guide

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP.

This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of HP.

Hewlett-Packard Company

10955 Tantau Avenue

Cupertino, CA 95014-0770

USA

Copyright © 2006, 2007 Hewlett-Packard Development Company, L.P.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited pay-per-view viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.

Adobe and Acrobat are trademarks of Adobe Systems Incorporated.

Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license.

HP supports lawful use of technology and does not endorse or encourage the use of its products for purposes other than those permitted by copyright law.

The information in this document is subject to change without notice.

Preface

About This Guide

This guide is intended for anyone who uses the W220q LCD Monitor. It describes the monitor's features, setup, and operation.

The sections are as follows:

• Safety and Maintenance Guidelines - Setup • Using the Monitor • Installing Drivers and Using the Auto-Adjustment Feature • Technical Support FAQs - Specifications • LCD Monitor Quality and Pixel Policy • Agency Regulatory Notices

Notational Conventions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your monitor.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data, and tells you how to avoid the problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem.

Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.

Safety and Maintenance Guidelines

Important Safety Information

The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. For information on the correct power cord set to use with your monitor, see Power Cord Set Requirements.

WARNING: To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding feature. The grounding plug is an important safety feature. Connect the equipment to a grounded (earthed) power outlet.

For your safety, be sure that the grounded power outlet you plug the power cord into is easily accessible to the operator and located as close to the equipment as possible. To disconnect power from the equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord.

Before connecting cables, disconnect power from the monitor by unplugging the power cord from the electrical outlet.

Do not place anything on power cords or cables. Arrange them so that no one can accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by its plug.

CAUTION: To protect your monitor, as well as your computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, or scanner) to a surge protection device such as a power strip with surge protection or uninterruptible power supply (UPS).

Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a damage replacement policy so you can replace your equipment if surge protection fails.

Safety Precautions

CAUTION: Avoid applying pressure to the LCD screen; doing so can cause damage.

• Use only a power source and connection compatible with this monitor, as indicated on the label/back plate of the monitor.
• Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (Amps or A) for each device.
• Install your monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
• Do not allow anything to rest on the power cord. Do not walk on the cord.

Maintenance Guidelines

To enhance the performance and extend the life of your monitor:

• Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating properly or has been dropped or damaged, contact your Hewlett-Packard authorized dealer, reseller, or service provider.
• Adjust only those controls that are described in the operating instructions.
• Turn your monitor off when not in use. You can substantially increase the life expectancy of your monitor by using a screen saver and turning off the monitor when not in use.
• Keep your monitor in a well-ventilated area, away from excessive light, heat, or moisture.
• Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.
• Unplug your monitor from the wall outlet before cleaning.
• Do not drop your monitor or place it on an unstable surface.
• When removing the monitor pedestal base, you must lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken.

Cleaning the Monitor

The monitor is a high-quality optical device that requires special care when cleaning. To clean the monitor, follow these steps:

1. Turn off the computer and the monitor. 2. Unplug your monitor from the wall outlet before cleaning.

CAUTION: Do not use benzene, thinner, ammonia, or any volatile substances to clean the monitor screen or cabinet. These chemicals may damage the monitor. Do not use liquid cleaners or aerosol cleaners. Never use water to clean an LCD screen.

3. Wipe the screen with a dry, soft, clean cloth. - If the screen requires additional cleaning, use an antistatic screen cleaner. 4. Dust the monitor housing. Use a damp cloth to clean the cabinet. - If the cabinet requires additional cleaning, use a clean cloth dampened with isopropyl alcohol. 5. Plug in the monitor. 6. Turn on the monitor and the computer.

Setup

Base and Tilt

Attaching the Base

1. Set the base on a flat surface, such as a table top.

2. Using both hands, position the pedestal over the base and press down firmly to lock it in place. Make sure that the base is securely locked in place before continuing with the setup procedure.

CAUTION: To prevent damage, avoid applying pressure to the panel front.

Removing the Base

1. Set the panel face-down on a flat, protected surface. 2. Squeeze the tabs in the bottom of the base to release the lock. 3. Remove the base from the pedestal.

CAUTION: To prevent damage, avoid applying pressure to the panel front.

Adjusting the Tilt

For optimal viewing, adjust the screen tilt to your own preference, as follows:

1. Face the front of the monitor and hold the stand so that you do not topple the monitor while changing the tilt. 2. Adjust the tilt by moving the monitor's top edge toward or away from you.

CAUTION: To avoid breakage or other damage, do not touch the LCD screen while changing the tilt.

Cables

Attaching the Cables

1 Turn off your computer. 2 Connect the built-in monitor speakers to the computer, using the audio cable (green connector).

3 If you are attaching a VGA cable, connect one end of the 15-pin D-Sub VGA cable (blue connector) to the back of the monitor and connect the other end to the computer VGA port.

4 Connect one end of the power cord to the back of the monitor and plug the other end into a grounded outlet.

5 Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, see Technical Support FAQs and Using the Monitor.

Wall Mounting Arm

Preparing to Install a Wall Mounting Arm (Not supplied)

This monitor can be attached to a wall mounting arm that you purchase separately.

CAUTION: Before disassembling the monitor, turn off the monitor power, and disconnect all power, video, and audio cables.

Wall-Mounting the Monitor (Mounting Fixture not Supplied)

Before you mount the monitor on a wall, a swing arm, or other mounting fixture, you must remove the monitor base and the pedestal. You will need a Phillips screwdriver. Read the following warning and caution statements before beginning the procedure.

WARNING: To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting fixture is adequately installed and secured before attaching the monitor. Refer to the instructions supplied with the wall-mounting fixture and check that it is capable of supporting the monitor.

1 Disconnect the cables from the monitor.

2 With the panel face-down on a protected surface, remove the screws and the pedestal/base attachment. 3 Follow the manufacturer's instructions to assemble the wall mounting arm.

Installing a Wall Mounting Arm

1 Set the monitor screen down on a flat, soft, protected surface. 2 Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the mounting holes in the back of the monitor. 3 Insert four screws into the mounting holes and tighten. 4 Reconnect the cables. Refer to the user's manual that came with the wall mounting arm (purchased separately) for instructions on attaching it to the wall.

Using the Monitor

Operating Instructions

Control buttons are located on the front of the panel, as shown below. Use the Menu button (C) to adjust the display settings to your personal preferences:

• Set up the monitor, attach the cables, and adjust the tilt as described in the Setup section above.
• Press the Power button (F) to turn the monitor on and off. The power indicator lights up when the monitor is on.
• The monitor must be turned on for the other control buttons to work.
• Set the resolution (Setting the Optimal Resolution) and adjust the volume (Adjusting the Volume).
• Adjust the onscreen display (OSD) settings (Adjusting On-screen Display Settings).

External Controls

A - (minus) button

Navigates backward through the OSD menu and decreases adjustment levels. If the OSD menu is inactive, activates the Volume decrease.

B + (plus) button

Navigates forward through the OSD menu and increases adjustment levels. If the OSD menu is inactive, activates the Volume increase.

C Menu button Opens, selects, or exits the OSD menu.

D Mute button: Turns sound on or off.

E Auto button

Automatically fine-tunes the image quality.

F Power button: Turns the monitor on or off.

G Power LED: Fully powered = green

Sleep mode = amber

Sleep timer mode = flashing amber

See Technical Support FAQs for more information.

Settings

Setting the Optimal Resolution

The recommended resolution for this monitor is 1680 x 1050. To configure the monitor to this resolution, complete the setup procedure and make sure that the monitor is connected to the computer. Turn the monitor on and do the following:

1. Click the Windows Start Button®, and then click Control Panel. 2. Under Appearance and Personalization, click Adjust Screen Resolution. 3. Set the resolution slide bar to 1680 x 1050.

NOTE: If 1680 × 1050 is not shown, download the monitor driver from the Web. See Using the Monitor for instructions.

Adjusting the Volume

While the monitor is turned on but the OSD menu is inactive, press the volume increase and decrease (plus and minus) buttons to adjust volume to the desired level. Volume can range from 0 (mute) to 100. The preset value is 50.

Locking and Unlocking the OSD

To change the lock status of the on-screen display (from locked to unlocked, or from unlocked to locked) press and hold the Menu button for 10 seconds while the monitor is on. If the OSD is locked, the message "OSD Lock" displays for 10 seconds.

Adjusting On-Screen Display Settings

Use the OSD menu to adjust the screen image and change settings. To access the OSD menu:

1 If the monitor is not already on, press the Power button to turn the monitor on. 2 Press the Menu button to activate the OSD menu. 3 Press the - (minus) and + (plus) buttons to navigate through the functions. Once the desired function is highlighted, press the Menu button again to activate it. If the selected function has a sub-menu, it displays. Press - (minus) or + (plus) again to navigate through the sub-menu functions. Once the desired sub-function is highlighted, press the Menu button to activate it. 4 Press - (minus) or + (plus) to change the settings of the selected function. 5 To exit and save, select the Exit function. If you want to adjust another function, repeat steps 3–4.

NOTE: If the buttons remain untouched for 30 seconds while displaying a menu, new adjustments will be saved and exit the menu.

OSD Menu

The table below shows the OSD menus and their functions at each level.

OSD Menu Levels

Level 1 Level 2 Level 3 Factory Preset

Brightness	Adjustment	Scale		Y
	Reset
	Cancel
Save and Return
Contrast	Adjustment	Scale		Y
	Reset
	Cancel
Save and Return
Volume	Adjustment Scale			Y
Image Control	Auto Adjustment "Adjusting" Message Y
Horizontal Position	Adjustment Scale	Y
Vertical Position	Adjustment Scale	Y
	Custom Scaling	Fill to ScreenFill to Aspect Ratio
	Clock	Adjustment Scale	Y
Clock Phase	Adjustment Scale	Y
	Cancel
Save and Return
Color	9300 K
	6500 K			Y
Custom Color	Custom Color
		Adjustment
		Reset
		Cancel
		Save and Return
	sRGB
	Reset
	Cancel
Save and Return

OSD Menu Levels (continued) Level 1 Level 2 Level 3 Factory Preset

Language	Deutsch
	Simplified	Chinese
	Japanese
	English
	Español
	Français
	Italiano
	Nederlands
	Cancel
	Save and Return
Management	Power Saver	On / Off Selection	Y
	Power On Recall	On / Off Selection	Y
	Mode Display	On / Off Selection	Y
	Power-On Status Display	Top/Middle/Bottom	Middle
	DDC/CI Support	On / Off Selection	Y
	Sleep Timer	Timer Set Menu	Y
	Cancel
	Save and Return
OSD Control	Horizontal OSD Position	Adjustment Scale	Y
	Vertical OSD Position	Adjustment Scale	Y
	OSD Timeout	Adjustment Scale	Y
	Cancel
	Save and Return
Information
Factory Reset	Yes
	No
Exit

English

Installing Drivers and Using the Auto-Adjustment Feature

Downloading Drivers and Software

To download the latest version of drivers and software files from the HP Support Web site:

1 Refer to: http://www.hp.com/support 2 Select your country/region. 3 Select Download Drivers and Software. 4 Enter the model number of your monitor. The software download pages for your monitor will be displayed. 5 Download and install the driver and software files using the instructions in the download pages.

Using the Auto-Adjustment Function

Press the Auto button to optimize the screen performance for VGA (analog).

If your monitor is using VGA (analog) input, auto-adjustment can correct the following image quality conditions:

• Fuzzy or unclear focus
• Ghosting, streaking, or shadowing effects
• Faint vertical bars
• Thin, horizontal scrolling lines
• An off-center picture

Technical Support FAQs

Technical Support FAQs (Frequently Asked Questions)

Problem & Question Possible Solutions
Power LED is not on.	Make sure the Power button is on and the power cord is properly connected to a grounded power outlet and to the monitor.
No Plug & Play.	In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer and video card. Check with your computer manufacturer.Check the monitor's video cable and make sure none of the pins are bent.Make sure the HP monitor drivers are installed (HP monitor drivers are available at: http://www.hp.com/support)
Picture is fuzzy and has ghosting shadowing problem.	Adjust the contrast and brightness controls.Make sure you are not using an extension cable or switch box.We recommend plugging the monitor directly into the video card output connector on the back of your computer.For VGA input, the auto-adjustment function may fix this problem.
Picture bounces, flickers or wave pattern is present in the picture.	Move electrical devices that may cause electrical interference as far away from the monitor as possible.Use the maximum refresh rate your monitor is capable of at the resolution you are using.
Monitor is stuck in "Active Off-Mode."	The computer power switch should be in the on position.The computer video card should be snugly seated in its slot.Make sure the monitor's video cable is properly connected to the computer.Inspect the monitor's video cable and make sure none of the pins are bent.Make sure your computer is operational by hitting the Caps Lock key on the keyboard while observing the Caps Lock LED. The LED should either turn on or off after hitting the Caps Lock key.
Missing one of the primary colors (red, green, or blue).	Inspect the monitor's video cable and make sure that none of the pins are bent.Make sure the monitor's video cable is properly connected to the computer.
Screen image is not centered or sized properly.	Adjust horizontal and vertical screen position.For VGA input, the auto-adjustment function may fix this problem.
Picture has color defects (white does not look white).	Adjust RGB color or select color temperature.
Unable to set the monitor to the optimal resolution.	Make sure that the graphics card supports the optimal resolution ( 1680 × 1050 ).Make sure that the latest supported driver is installed for the graphics card. For HP and Compaq systems, you can download the latest graphics driver for your system from:http://www.hp.com/supportFor other systems, refer to the Web site for your graphics card.

Specifications

All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower.

W220q

Display Type 22 inches, TFT LCD 55.88	cm
Viewable Image Size 22-inch diagonal	55.88 cm
Tilt	-5°	to
Face Treatment	Antiglare polarizer with hard coating (select models only)
Maximum Weight (unpacked) 14.551 lb. 6.6 kg
Dimensions (including pedestal)
H e i	17.20 inches h t	437 mm
D e p	9.84 inches h	250 mm
W i d	20.74 inches h	526.7 mm
Optimum Display Resolution 1680 x 1050 (60 Hz)
Text Mode 720 x 400
Dot Pitch 0.282 (H) x 0.282 (V) mm
Horizontal Frequency	30 to 81 kHz
Vertical Refresh Rate	56 to 76 Hz
Audio Power Output	2W / channel @ PC 1 Vrms
Speaker (R/L)	2W / 16 ohm speaker
Power Consumption	<55 watts typical
Input Terminal	VGA connector
Environmental Requirements
Temperature: Operating	41 to 95°F	5 to 35°C
Non-operating	-4 to 140°F	-20 to +60°C
Relative Humidity	20 to 85% (non-condensing)
Power Source	100-240 V v , 50-60 Hz
Altitude: Operating	0 to 6,561.68 feet	0 to 2,000 m
Non-operating	0 to 40,000 feet	0 to 12,192 m

20°

Preset Display Modes

Preset	Pixel	Format	Horizontal Frequency (kHz)	Vertical Frequency (Hz)
1 640 x 480	31.47	59.94
2 640 x 480	37.50	75.00
3 720 x 400	31.47	70.08
4 800 x 600	37.88	60.32
5 800 x 600	46.88	75.00
6 832 x 624	49.72	74.55
7 1024 x 768	48.36	60.00
8 1024 x 768	60.02	75.03
9 1152 x 720	44.86	60.00
10 1152 x 870	68.68	75.06
11 1152 x 900	61.80	65.96
12 1280 x 768	47.396	60.00
13 1280 x 960	60.00	60.00
14 1280 x 1024	63.98	60.02
15 1280 x 1024	79.98	75.02
16 1440 x 900	55.94	59.89
17 1600 x 1000	61.648	60.00
18 1680 x 1050	65.29	60.00

Power Cord Set Requirements

The monitor power supply is provided with automatic line switching (ALS). This feature allows the monitor to operate on input voltages in the range of 100–240V, 50/60 Hz, 1.5A.

The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country/region where the equipment was purchased.

If you need to obtain a power cord for a different country/region, you should purchase a power cord that is approved for use in that country/region.

The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm² or 18AWG, and the length of the cord must be between 4.94 ft (1.5 m) and 12 ft (3.6 m). If you have questions about the type of power cord to use, contact your HP-authorized service provider.

A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.

Pin Assignments

Pin Number	15-Pin Side of the Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 Ground
5 Detect Cable
6 GND-R
7 GND-G
8 GND-B
9 +5V
10 Ground
11 Ground
12 DDC-Serial data
13 H-sync
14 V-sync
15 DDC-Serial clock

Plug and Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel.

LCD Monitor Quality and Pixel Policy

The HP LCD Monitor uses high-precision technology, manufactured according to high standards, to help guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the HP LCD Monitor. These imperfections are caused by one or more defective pixels or subpixels.

• A pixel consists of one red, one green, and one blue subpixel.
• A defective whole pixel is always turned on (a bright spot on a dark background), or it is always off (a dark spot on a bright background). The first is the more visible of the two.
• A defective subpixel (dot defect) is less visible than a defective whole pixel and is small and only visible on a specific background.

To locate defective pixels, the monitor should be viewed under normal operating conditions and in normal operating mode at a supported resolution and response rate, from a distance of approximately 50 cm (16 in).

We expect that, over time, the industry will continue to improve its ability to produce displays with fewer cosmetic imperfections, and we will adjust guidelines as improvements are made.

For more information about your W220q Monitor, refer to the HP Web site at: http://www.hp.com/support

Agency Regulatory Notices

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user's authority to operate the equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC rules and regulations.

Declaration of Conformity for Products Marked with FCC Logo, United States Only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For questions regarding your product, contact:

Hewlett-Packard Company

P. O. Box 692000, Mail Stop 530113

Houston, Texas 77269-2000

Or

call: 1-(800)-474-6836

For questions regarding this FCC declaration, contact:

Hewlett-Packard Company

P. O. Box 692000, Mail Stop 510101

Houston, Texas 77269-2000

Or

call: 1-(281)-514-3333

To identify this product, refer to the part, series, or model number found on the product.

Canadian Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Canadian Notice

European Union Regulatory Notice

This product complies with the following EU directives:

• Low Voltage Directive 2006/95/EC • EMC Directive 2004/108/EC

Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family.

This compliance is indicated by the following conformity marking placed on the product:

This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g., Bluetooth).

This marking is valid for EU non-harmonized Telecom products. *Notified body number (used only if applicable — refer to the product label).

Hewlett-Packard GmbH, HQ-TRE, Herrenberger Straße 140, 71034 Böblingen, Germany

Disposal of Waste Equipment by Users in Private Households in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Japanese Notice

Japanese Power Cord Notice

Japanese Material Content Declaration

A Japanese regulatory requirement, defined by Specification JIS C 0950, 2005, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit www.hp.com/go/jisc0950.

This HP product contains Mercury in the fluorescent lamp in the display LCD that might require special handling at end-of-life.

Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) (www.eiae.org).

HP Recycling Program

HP offers product end-of-life return programs for HP and other manufacturers' hardware in several geographic areas.

The terms and availability of these programs vary by geography because of differences in regulatory requirements and local customer demand. For information on the HP recycling program, refer to the HP Web site at: http://www.hp.com/recycle

EPA ENERGY STAR® Compliance

ENERGY STAR

Products marked with the ENERGY STAR® logo on the packaging box qualify with the U.S. Environmental Protection Agency's ENERGY STAR® guidelines for energy efficiency.

Products with the ENERGY STAR® label are designed to use less energy, help you save money on utility bills, and help protect the environment.

ENERGY STAR® is a registered trademark owned by the U.S. government.

The Table of Toxic and Hazardous Substances/Elements and their Content

as required by China's Management Methods for Controlling Pollution by Electronic Information Products

Part Name	Toxic and Hazardous Substances and Elements
	Lead (Pb)	Mercury (Hg)	Cadmium (Cd)	Hexavalent Chromium (Cr(VI))	Polybrominated biphenyls (PBB)	Polybrominated diphenyl ethers (PBDE)
Liquid Crystal Display Panel	X	X	O	O	O	O
Chassis/Other	X	O	O	O	O	O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006.X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.All parts named in this table with an “X” are in compliance with the European Union’s RoHS Legislation – “Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment”.Note: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.