WM-FH-W001 - Heating Sygonix - Free user manual and instructions
Find the device manual for free WM-FH-W001 Sygonix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fan Heater |
| Brand | Sygonix |
| Model | WM-FH-W001 |
| Heating Power | 2000 W |
| Voltage | 220-240 V ~ 50/60 Hz |
| Dimensions (H x W x D) | 30 x 25 x 15 cm |
| Weight | 2.5 kg |
| Thermostat | Adjustable |
| Safety Features | Overheat protection, tip-over switch |
| Heating Element | Ceramic |
| Fan Speeds | 2 |
| Oscillation | No |
| Control Type | Rotary knob |
| Cord Length | 1.5 m |
| Color | White |
| Protection Class | II |
| Noise Level | 45 dB |
| Energy Efficiency Class | A |
| Suitable For | Indoor use |
| Warranty | 2 years |
Frequently Asked Questions - WM-FH-W001 Sygonix
How do I clean the Sygonix WM-FH-W001 heater?
First, unplug the heater and let it cool completely. Use a soft cloth to wipe the exterior. For the air intake and outlet, use a vacuum cleaner with a brush attachment. Do not use water or abrasive cleaners.
Is it safe to leave the heater on overnight?
The heater has built-in overheat protection and a tip-over switch, but it is not recommended to leave it unattended for long periods. Always follow the safety instructions in the manual.
Does the WM-FH-W001 have a timer function?
No, this model does not feature a built-in timer. It uses a simple on/off switch with adjustable thermostat control.
Why is the heater blowing cold air?
Check that the thermostat is set to a higher temperature than the room. Ensure the heater is plugged in and the power switch is on. If the issue persists, the heating element may be faulty.
Does the heater have a thermostat?
Yes, it has an adjustable thermostat that allows you to set your desired room temperature. Once reached, the heater will cycle on and off to maintain it.
What is the power consumption of this heater?
The heater has a maximum power output of 2000 W. At full power, it consumes 2 kWh per hour. Actual consumption depends on the thermostat setting.
Can I use an extension cord with the WM-FH-W001?
It is not recommended. If necessary, use a heavy-duty extension cord rated for at least 2000 W and fully unrolled. Ensure the cord does not overheat.
How do I reset the heater after a safety shutdown?
Unplug the heater and let it cool down for 15 minutes. Check for blockages in the air vents. Plug it back in and turn it on. The safety features will automatically reset.
Does the heater oscillate?
No, the WM-FH-W001 does not have an oscillation feature. It has a fixed front panel with manual adjustment of the airflow direction if possible.
Where can I find the filter, and how often should I clean it?
The heater has a removable dust filter located at the rear or side. Clean it every 2 weeks with a vacuum cleaner to maintain performance. Replace if damaged.
User questions about WM-FH-W001 Sygonix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual WM-FH-W001 - Sygonix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WM-FH-W001 by Sygonix.
USER MANUAL WM-FH-W001 Sygonix
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sygonix
Model : WM-FH-W001
Category : Heating