ZoneFlex 7982 - Access Point Ruckus Wireless - Free user manual and instructions
Find the device manual for free ZoneFlex 7982 Ruckus Wireless in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | Ruckus Wireless |
| Model | ZoneFlex 7982 |
| Wireless Standard | IEEE 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 300 Mbps per band |
| Antenna Type | Internal dual-polarized pattern |
| Ethernet Ports | 2 x 10/100/1000 Mbps (1x PoE) |
| Power over Ethernet | 802.3af/at PoE or DC power adapter (12V) |
| Dimensions (W x D x H) | 20.0 x 20.0 x 4.5 cm (7.9 x 7.9 x 1.8 in) |
| Weight | 1.2 kg (2.6 lbs) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Security | WPA2, WPA, 802.1X, MAC address filtering |
| Management | Web interface, SSH, SNMP, Ruckus ZoneDirector |
| Mounting | Wall, ceiling, or desk mountable |
| LED Indicators | Power, Ethernet, Radio status |
| Care Instructions | Clean with dry, soft cloth; avoid liquids |
| Spare Parts | Contact Ruckus support for replacement parts |
| Repairability | Professional repair recommended; no user-serviceable parts |
Frequently Asked Questions - ZoneFlex 7982 Ruckus Wireless
How do I reset the ZoneFlex 7982 to factory defaults?
Press and hold the reset button on the back panel for at least 10 seconds using a paperclip until the LED blinks red. The device will reboot with default settings.
What is the default IP address and login credentials?
Default IP is 192.168.0.254 with username 'super' and password 'sp-admin'. Ensure your computer is on the same subnet.
Does the ZoneFlex 7982 support PoE?
Yes, it supports 802.3af/at Power over Ethernet. You can use a PoE switch or injector. Alternatively, use the optional 12V DC power adapter.
Can I mount this access point on a wall or ceiling?
Yes, the ZoneFlex 7982 comes with mounting brackets for wall, ceiling, or desk placement. Follow the installation guide for proper orientation.
What wireless standards does it support?
It supports IEEE 802.11a/b/g/n, delivering up to 300 Mbps per band (2.4 GHz and 5 GHz). It is not 802.11ac compatible.
How many clients can it handle simultaneously?
The ZoneFlex 7982 can handle up to 512 active clients, though performance may vary based on network conditions and configuration.
Is it compatible with Ruckus ZoneDirector controllers?
Yes, it works seamlessly with Ruckus ZoneDirector or FlexMaster for centralized management and mesh networking.
How do I update the firmware?
Download the latest firmware from the Ruckus support site. Log into the web interface, go to Administration > Upgrade, and upload the file. Do not power off during upgrade.
What security features are available?
It supports WPA2, WPA, 802.1X, and MAC address filtering. Advanced features like WIPS and rogue AP detection are available with ZoneDirector.
Does it have a backup battery or UPS?
No internal battery. For power backup, connect the access point to a PoE switch with UPS or use a separate external UPS.
User questions about ZoneFlex 7982 Ruckus Wireless
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual ZoneFlex 7982 - Ruckus Wireless and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZoneFlex 7982 by Ruckus Wireless.
USER MANUAL ZoneFlex 7982 Ruckus Wireless
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ruckus Wireless
Model : ZoneFlex 7982
Category : Access Point