ZoneFlex R700 - Access Point Ruckus Wireless - Free user manual and instructions
Find the device manual for free ZoneFlex R700 Ruckus Wireless in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Point |
| Brand | Ruckus Wireless |
| Model | ZoneFlex R700 |
| Dimensions (W x D x H) | 19.5 x 19.5 x 4 cm |
| Weight | 0.8 kg |
| Power Supply | PoE (802.3at) or 12V DC adapter |
| Wireless Standard | 802.11ac Wave 2 |
| Frequency Bands | 2.4 GHz and 5 GHz |
| MIMO | 3x3:3 |
| Max Data Rate | 5 GHz: 1.3 Gbps, 2.4 GHz: 450 Mbps |
| Ethernet Ports | 1 x Gigabit Ethernet (PoE in) |
| Antenna | Internal adaptive antenna array |
| Security | WPA2, WPA3, 802.1X, RADIUS, ACL |
| Management | Web GUI, CLI, Cloud (Ruckus Cloud) |
| Mounting | Ceiling or wall mount (kit included) |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 95% non-condensing |
| LED Indicators | Power, Ethernet, Wi-Fi status |
| Maintenance | Clean with a soft dry cloth; avoid liquids |
| Spare Parts / Repairability | Not user-serviceable; contact Ruckus support |
Frequently Asked Questions - ZoneFlex R700 Ruckus Wireless
How do I set up the ZoneFlex R700?
Connect the access point to your network via Ethernet with PoE or use the DC adapter. Power on, wait for the LED to turn green, then access the web interface at the default IP (e.g., 192.168.0.1) or use the Ruckus Cloud app.
What is the default username and password?
The default username is 'admin' and the default password is 'admin' (case-sensitive). For security, change these immediately after first login.
How do I reset the ZoneFlex R700 to factory defaults?
Press and hold the reset button (located on the back) for 10 seconds using a paperclip. The device will reboot with factory settings.
Does the ZoneFlex R700 support PoE?
Yes, it supports 802.3at PoE (Power over Ethernet). Ensure your switch or injector provides at least 15.4W (802.3at recommended).
What is the maximum range of the ZoneFlex R700?
Indoor range is approximately 30-50 meters (100-165 ft) in typical office environments, but actual range depends on obstacles and interference.
Can I manage multiple ZoneFlex R700 devices centrally?
Yes, you can manage them via the Ruckus Cloud platform or on-premises with SmartZone or ZoneDirector controllers.
How do I update the firmware?
Download the latest firmware from the Ruckus support site. Upload the file via the web interface under Administration > Firmware Upgrade.
What security protocols does the ZoneFlex R700 support?
It supports WPA2, WPA3, 802.1X with RADIUS, and MAC address filtering. For advanced security, enable VLAN and ACL.
How do I clean the ZoneFlex R700?
Use a soft, dry cloth to wipe the exterior. Do not use any liquids, sprays, or abrasive cleaners.
Is the ZoneFlex R700 wall-mountable?
Yes, it comes with a mounting bracket for ceiling or wall installation. Follow the included template for proper placement.
User questions about ZoneFlex R700 Ruckus Wireless
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual ZoneFlex R700 - Ruckus Wireless and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZoneFlex R700 by Ruckus Wireless.
USER MANUAL ZoneFlex R700 Ruckus Wireless
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ruckus Wireless
Model : ZoneFlex R700
Category : Access Point