BDI-A 2 30 - Wall socket BRENNENSTUHL - Free user manual and instructions
Find the device manual for free BDI-A 2 30 BRENNENSTUHL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Wall socket |
| Brand | Brennenstuhl |
| Model | BDI-A 2 30 |
| Number of outlets | 2 |
| Rated voltage | 230 V ~ 50 Hz |
| Rated current | 16 A |
| Maximum power | 3680 W |
| Material | Flame-retardant plastic |
| Protection class | IP20 |
| Mounting type | Flush or surface-mounted |
| Dimensions (HxWxD) | 80 x 80 x 40 mm |
| Weight | 0.1 kg |
| Color | White |
| Safety features | Child protection (shutters) |
| Standards | CE, VDE |
| Connection terminals | Screw terminals for up to 2.5 mm² wire |
| Operating temperature | -5 °C to 40 °C |
| Warranty | 2 years |
Frequently Asked Questions - BDI-A 2 30 BRENNENSTUHL
How do I install the Brennenstuhl BDI-A 2 30 wall socket?
Ensure power is off. Connect wires to screw terminals: L (brown/black), N (blue), PE (yellow-green). Secure in flush box and attach faceplate.
Warning: Consult a qualified electrician if unsure.
Warning: Consult a qualified electrician if unsure.
Is this socket suitable for outdoor use?
No, the BDI-A 2 30 has an IP20 rating, meaning it is only protected against solid objects larger than 12.5 mm and not against water. Use indoors only.
What is the maximum power I can draw from this socket?
The socket is rated for 16 A at 230 V, so maximum load is 3680 W. Do not exceed this to avoid overheating.
For continuous high loads, consider a dedicated circuit.
For continuous high loads, consider a dedicated circuit.
Does the BDI-A 2 30 have USB charging ports?
No, this model is a standard wall socket without USB ports. For USB charging, look at Brennenstuhl models with integrated USB.
What tools are needed for installation?
You need a screwdriver (Phillips or flathead depending on screws), wire stripper, and optionally a voltage tester. Ensure you have appropriate flush box.
How do I connect the wires to the socket?
Strip wires about 10 mm. Loosen screw terminals, insert conductors, tighten screws firmly. Ensure no bare wire protrudes.
Connect L, N, and PE correctly.
Connect L, N, and PE correctly.
Is the socket compatible with smart home systems?
The BDI-A 2 30 is a passive socket without smart features. To use with smart home, connect a smart plug or replace with a smart socket.
How should I clean the socket?
Disconnect power. Wipe exterior with a dry or slightly damp cloth. Do not use abrasive cleaners or liquids. Avoid moisture ingress.
What should I do if the socket feels warm?
Slight warmth under high load is normal. If excessively hot, reduce load or check wiring. Persistent overheating may indicate a fault – stop use and consult an electrician.
Does the socket come with mounting screws?
Typically, the socket includes screws for the faceplate. For the flush box, you may need separate screws.
Check package contents; if missing, use standard 3.5x25 mm screws.
Check package contents; if missing, use standard 3.5x25 mm screws.
User questions about BDI-A 2 30 BRENNENSTUHL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wall socket in PDF format for free! Find your manual BDI-A 2 30 - BRENNENSTUHL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDI-A 2 30 by BRENNENSTUHL.
USER MANUAL BDI-A 2 30 BRENNENSTUHL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BRENNENSTUHL
Model : BDI-A 2 30
Category : Wall socket