360TS - Saw Shindaiwa - Free user manual and instructions
Find the device manual for free 360TS Shindaiwa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Gas chainsaw |
| Brand | Shindaiwa |
| Model | 360TS |
| Guide bar length | 35 cm (14 inches) |
| Chain pitch | 3/8 inch |
| Chain gauge | 0.050 inch |
| Engine displacement | 36 cc |
| Maximum power | 2.4 kW (3.2 hp) |
| Idle speed | 2800 rpm |
| Maximum speed | 12000 rpm |
| Fuel tank capacity | 0.45 L |
| Chain oil tank capacity | 0.25 L |
| Weight (without bar and chain) | 5.8 kg |
| Sound level (LpA) | 101 dB(A) |
| Vibration level (front/rear) | 5.0/6.5 m/s² |
| Fuel | Gasoline-oil mixture 50:1 |
| Ignition system | Electronic CDI |
| Carburetor type | Diaphragm |
| Main functions | Wood cutting, pruning, felling |
| Routine maintenance | Air filter cleaning, chain sharpening, oil change |
| Safety | Chain brake, hand guard, emergency stop |
| Spare parts | Chain, bar, spark plug, air filter |
| Repairability | Repairability index not provided |
Frequently Asked Questions - 360TS Shindaiwa
What type of fuel to use for the Shindaiwa 360TS?
Use a mixture of unleaded gasoline (95 octane minimum) and quality two-stroke engine oil at a ratio of 50:1 (50 parts gasoline to 1 part oil).
How to adjust the carburetor of the 360TS chainsaw?
Carburetor adjustment is done via the idle (L) and high-speed (H) screws. Refer to the manual for precise settings, typically L: 1-1/4 turn, H: 1 turn. Adjust the idle first, then the high speed, being careful not to over-enrich.
What is the cold start procedure?
Activate the choke, set the switch to on, pump the priming bulb several times, pull the cord slowly until you feel compression, then pull sharply. Once the engine starts, disengage the choke and let it warm up.
How to sharpen the chain of the 360TS?
Use a round file of appropriate diameter (usually 4.8 mm for 3/8 pitch). File each tooth at a 30° horizontal angle and 85° vertical angle. Also sharpen the depth gauges. Check chain tension after sharpening.
When and how to replace the air filter?
Clean the air filter every day of use. Replace it at least once a year or if damaged. To replace, unscrew the cover, remove the old filter, install the new one making sure it is properly seated.
How to tension the chainsaw chain?
Loosen the guide bar nuts, turn the tensioning screw clockwise to tighten. The chain should be tight enough not to sag, but should be able to be pulled manually along the bar. Retighten the nuts.
What to do if the chain does not receive oil?
Check the chain oil level, the oil passage (hole in the guide bar) and the chain lubrication hole. If necessary, clean the oil channel with a stiff wire. Also check the oil pump.
How to store the Shindaiwa 360TS chainsaw?
Empty the fuel tank and run the engine until it stops to avoid deposits. Clean the machine, remove the chain and bar, and store it in a dry, frost-free place.
What are the common wear parts for this model?
Wear parts include the chain, guide bar, drive sprocket, spark plug, air filter and anti-vibration dampers. Replace them according to the manual's recommendations.
How to activate the chain brake?
The chain brake activates automatically in case of kickback by pushing the hand guard forward. To deactivate, pull the hand guard back until it clicks. Test its operation regularly.
User questions about 360TS Shindaiwa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 360TS - Shindaiwa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 360TS by Shindaiwa.
USER MANUAL 360TS Shindaiwa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Shindaiwa
Model : 360TS
Category : Saw