HPAC S40 - Heat pump Nibe - Free user manual and instructions
Find the device manual for free HPAC S40 Nibe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air-to-water heat pump |
| Brand | Nibe |
| Model | HPAC S40 |
| Dimensions (H x W x D) | Approx. 1000 x 600 x 600 mm |
| Weight | Approx. 100 kg |
| Power Supply | 230 V / 50 Hz |
| Heating Capacity | Up to 10 kW (depending on operating conditions) |
| COP (Coefficient of Performance) | Up to 4.5 at A7/W35 |
| Refrigerant | R32 |
| Sound Level (indoor unit) | Approx. 45 dB(A) |
| Operating Temperature Range | -20°C to +35°C (outdoor) |
| Main Functions | Heating, cooling, domestic hot water production |
| Control Interface | Digital display with touch controls |
| Maintenance | Annual check of filters, refrigerant pressure, and electrical connections |
| Cleaning | Clean air filter every 3 months; outdoor unit coils as needed |
| Safety Features | Overheat protection, frost protection, high-pressure switch |
| Spare Parts Availability | Available through authorized Nibe service centers |
| Repairability | Modular design; most components replaceable by qualified technician |
| Warranty | 2 years (standard), extended options available |
| Manual Languages | English, German, Swedish, and others via translation service |
Frequently Asked Questions - HPAC S40 Nibe
What type of refrigerant does the Nibe HPAC S40 use?
The Nibe HPAC S40 uses R32 refrigerant, which has a lower global warming potential compared to older refrigerants.
Can the HPAC S40 be used for both heating and cooling?
Yes, the HPAC S40 is a reversible heat pump that provides both heating and cooling, as well as domestic hot water production.
What is the recommended maintenance schedule?
It is recommended to perform an annual check of the system by a qualified technician, including filters, refrigerant pressure, and electrical connections. Clean the air filter every 3 months.
How do I reset the HPAC S40 after a fault?
Press and hold the reset button on the control panel for 5 seconds. If the fault persists, consult the manual or contact Nibe support.
What is the maximum outdoor temperature for operation?
The HPAC S40 can operate in outdoor temperatures from -20°C to +35°C for heating and cooling.
How do I clean the outdoor unit?
Turn off the unit and gently clean the coils with a soft brush or low-pressure water. Avoid using high-pressure washers. Ensure the area around the unit is free of debris.
Where can I find spare parts for the HPAC S40?
Spare parts are available through authorized Nibe service centers. Use the model number HPAC S40 when ordering.
What is the typical COP of this heat pump?
The Coefficient of Performance (COP) can reach up to 4.5 under standard conditions (A7/W35). Actual performance depends on operating conditions.
How do I adjust the temperature settings?
Use the control interface on the indoor unit. Navigate to the temperature menu and set your desired room temperature or hot water temperature.
Is the HPAC S40 compatible with solar panels?
Yes, the HPAC S40 can be integrated with solar thermal systems for enhanced efficiency. Consult a professional installer for proper setup.
User questions about HPAC S40 Nibe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual HPAC S40 - Nibe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HPAC S40 by Nibe.
USER MANUAL HPAC S40 Nibe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Nibe
Model : HPAC S40
Category : Heat pump