RW404262 - Wine cellar GAGGENAU - Free user manual and instructions

Product Type	Built-in Wine Cellar
Brand	Gaggenau
Model	RW404262
Total Capacity	42 bottles (standard 0.75 L)
Temperature Zones	Single zone
Temperature Range	5 °C to 20 °C
Climate Class	ST (subtropical)
Noise Level	38 dB(A)
Annual Energy Consumption	145 kWh
Voltage / Frequency	220-240 V / 50-60 Hz
Power Consumption (max)	120 W
Dimensions (H × W × D)	874 × 450 × 580 mm
Net Weight	45 kg
Features	Electronic temperature control, LED interior light, charcoal filter, wooden shelves
Door Hinge	Right, reversible
Installation Type	Built-in (vents at front)
Maintenance	Wipe with soft cloth and mild detergent; clean condenser annually
Safety	Ensure ventilation openings clear; do not store flammable materials
Spare Parts Availability	Original parts available through Gaggenau service (e.g., shelves, thermostat)
Reparability Index	As per EU regulation: 8.2/10

Frequently Asked Questions - RW404262 GAGGENAU

What is the temperature range of the Gaggenau RW404262 wine cellar?

The Gaggenau RW404262 can be set from 5 °C to 20 °C, ideal for storing both red and white wines.

How many bottles does the RW404262 hold?

It holds up to 42 standard 0.75-liter bottles.

What are the dimensions of the Gaggenau RW404262?

The dimensions are 874 mm high, 450 mm wide, and 580 mm deep.

Is the door reversible?

Yes, the door hinge is reversible, allowing installation on either side.

Does it have dual temperature zones?

No, the RW404262 is a single-zone wine cellar.

What type of shelves does it come with?

It includes wooden shelves that slide out for easy access.

How do I clean the wine cellar?

Use a soft cloth and mild detergent. Avoid abrasive cleaners. Clean the condenser at least once a year.

What is the noise level?

The noise level is 38 dB(A), very quiet for a built-in appliance.

Where can I find spare parts?

Spare parts are available through Gaggenau authorized service centers. Use only original parts for safety.

What is the annual energy consumption?

The annual energy consumption is 145 kWh, based on standard test conditions.

USER MANUAL RW404262 GAGGENAU

Installation instructions for side-by-side installation

RA097600

Installation

1. Change the door hinges of the left appliance.

2. Place the appliances side by side in front of the installation niche.

3. Align the appliances horizontally and vertically.

A wrench for adjusting the appliance height is supplied with the appliance.

Turn the wrench clockwise to raise the appliance, counterclockwise to lower it.

Position the wrench according to the direction of rotation.

1. Insert the top connecting bracket. Wooden worktop

Use the connecting bracket with a fixing flange.

1. Attach the cover plate.

1. Secure the combined appliances to the left and right in the installation niche.

2. Place the appliances side by side in front of the installation niche.

3. Align the appliances vertically and horizontally.

The wrench for adjusting the height of the appliance is included with the appliance.

1. Insert the top connecting bracket.

For wooden worktops

Use the connecting bracket with fixing flange.

1. Secure the appliance combination in the mounting slots on the right and left.

1. Change the door hinge for a left-hand appliance.

See chapter "Changing the door hinge" in the operating and installation instructions for the appliance.

The operating and installation instructions are included with the appliance.

1. Position the appliances next to each other in front of the installation recess.

Leave sufficient free space between the rear of the appliance and the installation recess so that work can be carried out behind the appliances.

1. Align the appliances vertically and horizontally.

See chapter "Installing the appliance" in the operating and installation instructions.

The wrench for adjusting the height of the appliance is included with the appliance.

Turn the wrench clockwise to lift the appliance, and anti-clockwise to lower it.

Position the wrench accordingly.

1. Use the connecting brackets (article number 7746 367-00) to screw the appliances together at the rear.

In each case, use two 4 x 14 screws.

1. Remove the covers.

1. Insert the top connecting bracket.

For wooden work surfaces

Use the connecting bracket with a fixing flange.

For work surfaces made of a material that cannot be fixed with screws (e.g., stone)

Use the connecting bracket without a fixing flange.

1. Fit the covers.

1. Slide the appliance combination into the recess until the front face of the appliance doors is flush with the unit fronts.

When sliding in the appliance combination, ensure that the network cables are not damaged.

1. Secure the appliance combination in the recess on the right and left.

The screws (4 x 30) are included in the accessories kit for the appliances.

1. For wooden work surfaces, secure the appliance combination at the top of the recess.

Complete the installation as described in the operating and installation instructions for the appliances.