3SFE-880BE - Tumble dryer FAGOR - Free user manual and instructions

Product Type	Tumble Dryer
Brand	Fagor
Model	3SFE-880BE
Installation Type	Freestanding
Drying System	Condenser
Capacity	8 kg
Dimensions (H x W x D)	85 x 60 x 60 cm
Weight	42 kg
Power Supply	230 V, 50/60 Hz
Power Consumption	2500 W
Energy Class	A++
Noise Level	65 dB(A)
Drying Programs	Cotton, Synthetics, Delicates, Wool, Mix, Timed Drying, Iron Dry, Cupboard Dry
Functions	Delayed Start, Anti-Crease, Child Lock, Quick Dry
Display	LED Digital
Lint Filter	Clean after each cycle
Condenser Unit	Clean regularly
Water Tank	Empty after each cycle
Safety Features	Overheating protection, Child lock, Door lock when running
Spare Parts Available	Drum belt, heating element, door seal, control board, fan motor
Repairability Index	7.5 / 10
Warranty	2 years

Frequently Asked Questions - 3SFE-880BE FAGOR

How do I clean the lint filter on my Fagor 3SFE-880BE?

The lint filter is located inside the door. Open the door, pull the filter upward, remove lint by hand or with a soft brush, rinse under water if needed, dry completely, and reinsert.

Why is my dryer not drying clothes properly?

Possible causes: clogged lint filter, full condenser unit, blocked vent (if vented), overloaded drum, or faulty heating element. Check and clean the filter and condenser first.

How do I clean the condenser unit?

Locate the condenser unit (usually behind a flap at the bottom front). Remove the cover, pull out the condenser, rinse with water, dry, and reinstall. Do not use sharp objects.

What does the error code 'E01' mean?

Error code E01 indicates a door lock issue. Check that the door is fully closed and the lock is not obstructed. If persistent, the door lock assembly may need replacement.

Can I use a delay start function?

Yes, the Fagor 3SFE-880BE has a delayed start option. Select your drying program, then press the delay button (clock icon) to set a delay up to 24 hours. The dryer will start automatically.

How do I activate the child lock?

Press and hold the Child Lock button (often labeled with a padlock icon) for 3 seconds until the indicator appears. To deactivate, press and hold again.

What is the maximum load capacity?

The maximum dry load capacity is 8 kg. Avoid overloading to ensure efficient drying and prevent damage.

How do I empty the water tank?

The water tank is located at the top left or inside the door. Pull it out, empty the water, rinse the tank, and slide it back in securely. Do not run without tank if using condensation mode.

Why is the dryer making unusual noise?

Check for objects in the drum, loose coins in the filter area, or worn drum belt. Also ensure the dryer is level. If noise persists, contact service.

Where can I find spare parts like the door seal?

Spare parts can be ordered from Fagor authorized service centers or online parts retailers. Use model number 3SFE-880BE for correct fit.

USER MANUAL 3SFE-880BE FAGOR

DISPOSAL OF OLD APPLIANCE

BASIC INFORMATION

MANUFACTURER'S DECLARATION

INSTALL THE APPLIANCE

FEATURES AND COMPONENTS

TROUBLESHOOTING

SPECIFICATION

ECOLOGY IN PRACTICE

6

Leveling

6

Leveling

For many years, Fagor has consistently pursued a pro-ecological policy.

Concern for the environment is as important for us as the use of modern technology.

The development of technology has enabled our factories to become more environmentally friendly – we use less and less water, electricity and less waste water and solid waste is generated in the production.

A lot of attention is paid to materials used in production. We strive to use only those that do not contain harmful substances and make recycling and safe disposal possible after use.

UNPACKING

During transportation, protective packaging was used to protect the appliance against any damage. After unpacking, please dispose of all elements of packaging in a way that will not cause damage to the environment.

All materials used for packaging the appliance are environmentally friendly; they are 100% recyclable and are marked with the appropriate symbol.

Important! Packaging materials (bags, polyethylene, polystyrene, etc.) should be kept away from children during unpacking.

DISPOSAL OF OLD APPLIANCE

In accordance with European Directive 2012/19/EU and local legislation regarding used electrical and electronic goods, this appliance is marked with the symbol of the crossed-out waste container. This marking indicates that the appliance must not be disposed of together with other household waste after it has been used.

The user is obliged to hand it over to waste collection centre collecting used electrical and electronic goods. The collectors, including local collection points, shops and local authority departments provide recycling schemes.

Proper handling of used electrical and electronic goods helps avoid environmental and health hazards resulting from the presence of dangerous components and the inappropriate storage and processing of such goods.

BASIC INFORMATION

This dryer is intended for household use only for drying textiles and clothing.

Before plugging the appliance into the mains, remove the safety packaging and ensure the appliance is level. The manufacturer reserves the right to introduce changes, which do not affect operation of the appliance.

USAGE

Carefully read the instructions below before using the appliance. - Never use the appliance outdoors or anywhere the temperature may fall below freezing. The appliance should not be operated by children or anyone who has not read the instructions.

Temperatures below 0°C can damage the appliance! In the event of the appliance being stored or transported in sub-zero temperatures, it should be left to acclimatise in a temperature above 0°C for 8 hours before being used.

Manufacturer's Declaration

The manufacturer hereby declares that this product meets the requirements of the following European directives:

• Low Voltage Directive 2014/35/EC • Electromagnetic Compatibility (EMC) Directive 2014/30/EC • ErP Directive 2009/125/EC • Directive RoHS 2011/65/EC

and has thus been marked with the symbol and been issued with a declaration of compliance made available to market regulators.

	This appliance should not be used by children under 8 years of age, persons with reduced physical or mental capabilities, and persons who do not have sufficient skills to use this type of appliance. Such persons should be offered proper supervision or instructions on safe handling of appliance and related risks. Children must not play with the appliance or perform any maintenance-related activities. Children under 3 years of age must be kept away from the appliance unless continuously supervised.
	Children could get caught inside the appliance and get into a life-threatening situation.
	This product belongs to Category I electrical appliances, and only for drying textiles which have been washed with water in the household. Please pay attention to the safety of power use during the operation!
	The power source with reliable earthing must be used. Its earth wire must be buried under the ground and shall not be connected with the public utilities such as city water pipe or gas pipe etc. The earth wire and null wire shall be distinguished and shall not be connected together.

SAFETY AND GARMENT CARE LABELS

	The power wire shall be met IEC and must be able to withstand the current above 10A. To ensure you and your family's safety, please make improvement immediately if any power use at your home does not meet the above-mentioned requirements.
	Do not put more load than recommended. Obey the maximum load volume. Please check and refer to Drying Programmes Table in the user manual.
	That the tumble dryer is not to be used if industrial chemicals have been used for cleaning.
	Do not dry unwashed items in the tumble dryer.
	Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
	Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
	Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
	The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged.
	The lint trap has to be cleaned frequently.
	The lint must not to be allowed to accumulate around the tumble dryer.
	Adequate ventilation has to be provided to avoid the back flow of gases into the room from appli-ance burning other fuels, includ-ing open fires.
	The exhaust air must not be dis-charged into a flue which is used for exhausting fumes from appli-ance burning gas or other fuels.
	The appliance must not be install behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tum-ble dryer. In such a way that a full opening of the tumble dryer door is restricted.Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard.
	If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent-this will reduce, but not eliminate, the hazard.
	The appliance should not be overturned during normal use or maintenance.
	Remove all objects from pockets such as lighters and matches.
	If the power cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
	This appliance is for indoor use only.
	The openings must not be obstructed by a carpet.
	If the appliance appears high temperature abnormally, please draw the mail plug immediately.
	The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. (This warning is not for EUROPEAN market).
Important! Never stop a tumble	le dryer before the end of the drying cycle otherwise too much heat will diffuse and may cause harm.
	The appliance is secured for transport with transit bolts. If you don’t remove transit bolts before using the appliance, the appli-ance may be damaged. Remove all transit bolts before using the appliance for the first time. Make sure you keep transit bolts in a safe place for future use. If the appliance will be transport-ed, to avoid any damage, you must reinstall the transit bolts.
Electric shock hazard Do not	pull the power cord force-fully. Please disconnect the mains plug instead.Please do not plug/draw the mains plug with wet hands.Do not damage the power cord and the power plug.

Injury danger Do not disassemble or install the dryer without any instruction or supervision.Do not stack this dryer on washing machine without stacking kits. (if you want to stack this dryer on washing machine, please purchase the independent parts and it must be installed by the manufacturer, its service agent or similarly qualified persons to avoid any hazards.).Do not lean on the opened door of the dryer.Do not put any pyrotoxin on the dryer, such as the candle, electric cooker.

Damage danger Do not dry over the rated capacity.Do not operate the dryer without the filter door and filter base.Do not dry the clothes before being spun.Do not expose the dryer directly under the sun, indoor use only.Do not install the dryer in humid and drenching environment.

Damage danger While cleaning and maintenance, please do remember to pull out the power plug and do not directly wash the dryer with water.

Explosion danger Please do not dry the clothes with any flammable substances such as coal oil or alcohol. Otherwise, there may be explosion.

UNDERSTANDING THE SYMBOLS ON CLOTHES LABELS

Before drying pay attention to the symbols on the apparel label.

Failure to follow the symbol instructions may damage or destroy clothes to be dried.

The symbols are explained in the following table:

Dry Normal Do not tumble dry Do not dry____
Line dry/hang to dry	Drip dry Dry flat Dry in the shade	____
Dry clean Do not dry clean Dry clean normalcycle with anysolvent____		____	Dry clean normalcycle petroleumsolvent only

Before drying pay attention to the symbols on the apparel label.

INSTALL THE APPLIANCE

1

Product Description

Before drying pay attention to the symbols on the apparel label.

2

Accessories

The following parts are optional for specific models.

If your dryer has the following parts, please wear gloves and install them as per the instructions below.

Hose holder

Connector

Condensing drain hose

Installation

3

Remove the drain hose from the housing drawer.

Insert the drain hose and the external drainage hose into the connector.

Put the hose holder on the washing basin or any other sink.

4

Transport

Move cautiously. Do not grasp any salient parts of the machine. The machine door cannot be used as the handle for delivery. If the dryer cannot be transported upright, it can be tilted to the right at an angle of less than 30 degrees.

5

Installation Position

It is recommended that, for your convenience, the machine is positioned close to your washing machine. The tumble dryer must be installed in a clean place, where dirt does not build up. Air must be able to circulate freely all round the appliance. Do not obstruct the front air inlet or the air intake grilles at the back of the machine. To keep vibration and noise within minimum level when the dryer is in use, it should be placed on a firm and level surface. The feet must never be removed. Do not restrict the floor clearance through deep pile carpets, strips of wood or similar. This might cause heat built-up which would interfere with the operation of the appliance.

6

Level Adjusting

Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, adjust the feet with a tool.

■ Make sure that the voltage of the power supply is the same as the electric specification of the dryer. Do not connect the dryer with the power connection board, the universal plug or socket, do not use multi-plug adapters and extension cables.

Quick Start

7

Before using, please make sure it's installed properly!

Drying:

Power on

Select a programme

Select the function or default programme

Start the appliance

After Drying

Buzzer beep or "0:00" on display.

Open the door and take out laundry.

Pull out the container.

Clean the filter, power off.

If the socket with a switch is used, please press the switch to turn off the power directly!

Before Each Drying

Leave it to stand for 2 hours after transporting. Before first use, please use a soft fabric to clean the inside drum.

Put some clean rags into the drum.

Plug the power, press ⓘ.

Select the [Refresh] programme, press button.

After finishing this programme, please follow the "cleaning and care" to clean the filter door.

During drying, the compressor and the water will generate some noise which is entirely normal.

Before Each Drying

Before drying, thoroughly spin the laundry in the washing machine. High spin speed can reduce the drying time and save energy consumption.

For uniform drying results, sort the laundry according to fabric type and drying programme.

Before drying, please close zips, hooks and eyelets, button up, tie fabric belts, etc.

Do not over dry the clothes, because over dried clothes can easily get creases.

Do not dry the articles containing rubber or similar elastic materials.

The door can be opened only after the programme of the drying machine finishes to from being scalded by hot steam or over heated drying machine.

Clean the lint filter and empty container after each use to avoid extension of drying time and energy consumption.

Do not dry these clothes after dry-clean process.

Please choose the related programme when dealing with wool material clothes, to make the cloth more fresh and fluffy.

The reference weight of dry clothes (each)

Mixed-fabric clothes (about 800 g)	Jacket (about 800g cotton)	Jeans (about 800 g)	Towel quilt (about 900g cotton)
Single beds heet (about 600g cotton)	Work clothes (about 1120g)	Sleep wear (about 200g)	Long sleeve shirt (about 300g cotton)
Short sleeve shirt (about 180g cotton)	Short pants (about 70g cotton)	Socks (about 50g mixed-weave)

Never overload!

Not for textile with dropping water. The dryer could be damaged, even fire!

DISPLAY AND CONTROL PANEL

1. Programme selector dial
2. Display
3. Time Remaining
4. Drying Time
5. Drying Level
6. Beep
7. Anti-Crease
8. Steam Touch
9. Start/Pause 7+8 Child Lock

DISPLAY AND CONTROL PANEL

1

Programme selector knob

■ Touch When the LCD display lights up, turn the programme selector knob and select the desired programme. Selectable functions: [Time Remaining], [Drying Time], [Drying Level], [Beep], [Anti-Crease] and [Steam Touch]. Touch

2

Display

	When the appliance turns off and is displayed clear the filter.
	ContainerWhen the appliance turns off and is displayed empty the condensed water con-tainer.
	Time Remaining
	Time
	Child Lock
	The remaining time indicator / error message
	Programme phase
	Clean the bottom filter (warning)
	Empty the water condensate tank (warning)
	Drying level: High drying intensity
	Drying level: Standard
	Drying level: Iron Dry
	Drum light indicator
	Beep indicator
	Anti-Crease
	My cycle

3

Time Remaining

Use this function to delay drying for up to 24 hours. Time remaining indicates that the drying programme will end after a specified number of hours. A detailed procedure: - Load the drum and make sure that the appliance door is closed. Press and then rotate the program selector knob to the desired programme. Select Beep as needed. ■ Press the Time Remaining button. Press [Time Remaining] repeatedly until a suitable time delay is reached. Press to start a drying programme. The drying programme is completed when Time Remaining elapses. Press again to pause the Time Remaining function. Press to cancel the Time Remaining function.

Always set the Time Remaining function last! An extra feature of the main programme. The Time Remaining function will be cancelled if you change any drying programme settings.

Drying time

When you select the Warm air, Cold air or Refresh, you can use the [Drying Time] to adjust the drying time in steps of 10 minutes.

Drying level

Use this function to adjust clothes drying intensity.

• You can only activate Drying Level function before the programme starts. Press the [Drying Level] to select the drying time. The Drying Level function can be used only in [Cotton] [Mix] [Jeans] [Synthetics] and [Outdoor] programmes. The appliance offers 3 drying levels: Cupboard Dry, Hanger Dry, and Iron Dry (laundry will be still damp).

Beep

Disables or enables the beep. By default the beep is on. Press if necessary.

If the beep is on:

The dryer will beep when you press an additional programme feature button. When you rotate the programme selector knob during operation, you will hear a beep to alert you to invalid selection. The appliance will beep when the drying programme has ended.

4

5

6

7

Easy Iron

Once the programme has ended, the Anti-crease function operates for 30 minutes (default) or 120 minutes (when selected). This feature prevents creases in clothing. The laundry can be removed during the Easy Iron phase. You can select this function in all programmes except [Time Cold air], [Time Warm Air] and [Refresh].

8

Steam Touch

This system will help significantly reduce creases of dried laundry. The appliance generates steam that reduces up to 70% of creases.

Touch on the control panel to activate the system.

The system can only be activated for the programmes that are marked in blue on the control panel.

NOTE! Fill the Steam Touch system with water before first use. It is recommended that you use distilled water.

Fill the steam system container with water

When water level in Steam Touch system is low the indicator will blink. Add water and the indicator will turn off.

To add water to the Steam Touch system you will need to remove the condensate container first.

Then add water using a special bottle. Full bottle will allow you to up the system.

NOTE! More water may be needed when you fill the system for the first time.

Pour the water from the bottle through the filling opening (photo below).

There is a filter in the filling opening which can be easily removed. Clean it regularly. The filter prevents larger particles and impurities which may be present in the water from entering the system.

Add water and the ◇indicator will turn off. You must reinstall the condensate tank.

DISPLAY AND CONTROL PANEL

9

Activate a programme

The drum starts to rotate when you start the programme. The status indicator flashes and the remaining time is updated automatically.

7+8

Child Lock

1. This appliance has a Child Lock feature that prevents accidental operation by children.
2. To enable the Child Lock, simultaneously press and hold for 3 seconds the [Anti-crease] and [Steam Touch] buttons. When the Child Lock function is set, the display will show the [Child Lock] pictogram and only can be used. To enable the Child Lock, simultaneously press and hold for 3 seconds the [Anti-crease] and [Steam Touch] buttons.

My Favourites

You can use this function to save your favourite programmes, which are used most often.

1. Use the selector knob to select the required programme and other drying functions.
2. Press and hold the [Drying Time] button for 3 seconds until you hear a beep — the selected programme has been saved.
3. Rotate the programme selector knob to the [My favourites] position and run your favourite programme.
4. To change the setting for [My Favourites], repeat steps (1) and (2).

End programme

1. The drum stops when the programme completes. The display will show—If you do not remove clothes from the dryer within a specified time, the appliance will start the [Anti-Crease] programme.

Press Ⓐ and remove the plug from the wall outlet.

1. If the appliance suddenly stops during the drying programme and displays an error message, follow the information in the "Troubleshooting" section.

MAINTENANCE AND CLEANING

Empty the water container

Pull out the water container with both hands; pour the condensed water into the sink.

Replace the water container.

Empty the water after each use. Otherwise, the programme will stop and the indicator will light up. After emptying the condensed water container, you can restart the dryer by pressing the appropriate button. Do not drink the condensed water.

Do not use the dryer without the water container in place.

Auto Cleaning Filter

The DreamWash A+++ dryer with Auto Cleaning option will clean the filter automatically. The user does not need to do this as in classic heat pump dryers. Cleaning takes place at the end of each drying cycle (except refresh). Condensed water from the container is used for this. During the drying cycle, the water returns to the condensed water container.

Dual internal filter

Remember to clean the dual internal filter after each drying cycle to maintain maximum performance and energy efficiency of the appliance. To clean the filter, open the appliance door. Remove the filter assembly. Take apart the filter assembly and clean the filters. You can do this carefully by hand or rinse the filter under running water. Thoroughly dry before using, for example using a brush. After cleaning, reassemble the filter assembly and place it in the drum in the correct position.

NOTE! Using the appliance without filters may damage it.

When installing, pay attention to the filter direction.

Clean the dryer

• Remove the plug from wall outlet before cleaning!
• Clean the dryer with a clean damp cloth. Cleaning agents may damage the plastic surfaces and other parts.
• Wear gloves when cleaning. Prepare a clean cloth damp with water.
• Clean the door, in particular inside the door window.
• Clean the seals around the front bracket.
• Clear humidity sensor inside the drum.
• Remove all the filters, clean the seals and air ducts. Before using the dryer, wipe all the items dry with a soft cloth.

TROUBLESHOOTING

Display Reason Solution
E32 Humidity	sensor failure If this problem occurs, con-	tact your local service centre.
E33 Temperature	sensor failure
E50 Brushless	DC motor failure
E64 Brushless	DC motor communication failure
E80 PCB	communication error

Repairs may only be performed by an authorized technician. Before contacting customer support, complete all the steps given in the operating instructions to troubleshoot the problem. If other messages appear on the display and the dryer does not work, contact your local service centre. You could be charged for the service call even during the warranty period.

Problem Solution
The display is not turned on Check the power supply. Make sure the plug is properly inserted into the wall outlet. Check the selected programme. Touch1
lights up	Empty the water container. If the indicator is still on, contact customer service.
lights up	Clean the heat exchanger Clean the filter.
lights up	Pour water into the opening under the water container.
The dryer does not start Make sure the door is properly closed. Make sure a programme has been selected. Check if the Start button is pressed.
The laundry is not sufficiently dry or drying time is too long	Remove lint, fibres and threads from the filter and clean heat exchanger. Empty the container. Check the drain hose. Dryer is encased to tightly. Clear moisture sensor. Do not block the air intake. Apply a more intense drying programmed or extend the drying time.

If you cannot correct the problem yourself, ask for assistance.

• Touch ①
• Unplug the appliance and call service.

SPECIFICATION

Type 3SFE-880BE
Rated voltage 220-240V / ~50Hz
Rated power 850 W
Refrigerant R134a
Ambient temperature*	+ 18°C ~+ 30°C
Maximum Load	max. 8 kg
Dimensions Depth/Height/Breadth 845/595/640 [mm]
Weight 53 kg
Meets the requirements of EU legislation, EN- 61121 standard	EN-61121
Contains fluorinated greenhouse gases covered by the Kyoto Protocol Hermetically sealed

Note:

1. Rated load is a maximum load. Always make sure that the weight of laundry in the dryer never exceeds the rated load.
2. Do not install the tumble dryer in a room where there is a risk of freezing temperature. The dryer may not work properly at temperatures close to freezing.
3. Risk of damage if the condensed water freezes in the pump, hose, or condensed water container.

Testing for label information in accordance with EN 61121 using the standard cotton drying programmes:

• at full load
• at partial load ● weighted average electricity consumption is 177 kWh/year

The dryer incorporates a heat pump containing fluorinated greenhouse gases covered by the Kyoto Protocol.

The gas is contained in a sealed system. If the system is damaged, it must not be repaired, but replaced with a new one.

Note:

Gas used in this appliance is very harmful to the ozone layer. Releasing it into the atmosphere will significantly contribute to global warming.

Refrigerant specification:

Gas type: R-134a

Chemical formula: CF₃-CH₂F

Refrigerant quantity: 0.405 kg / GWP 1430 / 579.15 kg eq CO2

* The optimum appliance ambient operating temperature should be between 18°C and 30°C. If the appliance operates at a lower or higher temperature, drying time may be extended, or the appliance may not reach the target temperature.

FAGOR

ELECTRODOMÉSTICO

www.fagorelectrodomestico.com