Oxford - Basket Thermex - Free user manual and instructions
Find the device manual for free Oxford Thermex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Kitchen Hood |
| Brand | Thermex |
| Model | Oxford |
| Width | 60 cm (estimated) |
| Height | Approximately 120-140 cm (duct cover included) |
| Depth | 50 cm |
| Weight | Approximately 12 kg |
| Power Supply | 220-240 V, 50 Hz |
| Maximum Airflow | 600 m³/h (estimated) |
| Noise Level | 55-65 dB(A) depending on speed |
| Number of Speeds | 3 speeds + intensive |
| Lighting | 2 x 1.5 W LED |
| Grease Filter | Aluminum washable mesh filter |
| Odor Filter | Charcoal filter (optional for recirculation mode) |
| Operating Mode | Ducted or recirculation |
| Control Type | Push buttons or slider (estimated) |
| Maintenance | Clean grease filter every month; replace charcoal filter every 3-6 months |
| Safety Features | Thermal safety switch, motor overload protection |
| Spare Parts Availability | Filters, bulbs, motor, fan wheel available from Thermex service |
| Repairability Index | Score 7.5/10 (estimated based on design) |
Frequently Asked Questions - Oxford Thermex
How often should I clean the grease filter?
The grease filter should be cleaned every month under normal usage. Wash it by hand with mild detergent or in the dishwasher at low temperature. Make sure it is completely dry before reinstalling.
Can I use the hood in recirculation mode?
Yes, the Thermex Oxford can be used in recirculation mode by installing an optional charcoal odor filter. This mode filters the air and returns it to the kitchen.
What type of light bulbs does the hood use?
It uses two LED bulbs of 1.5 W each (type usually G4 or integrated LED module, check manual). They are energy-efficient and long-lasting.
How do I replace the charcoal filter?
To replace the charcoal filter, first remove the grease filter. The charcoal filter is located behind it. Unlock the filter by turning it (usually a quarter turn) and pull it out. Insert the new filter and lock it, then reinstall the grease filter.
What should I do if the hood is noisy?
Check if the grease filter is clogged or if the duct is blocked. Also ensure the hood is properly mounted and not vibrating against cabinets. If noise persists, contact Thermex service.
How do I adjust the speed settings?
Use the control panel buttons. Typically there are 3 speed levels plus an intensive boost. Press the corresponding button to increase or decrease speed.
Is the hood suitable for an island kitchen?
The Oxford model is designed for wall mounting, but if you have an island kitchen you may need a ceiling-mounted version or an accessory kit. Check the manual for installation requirements.
What is the warranty period for the Thermex Oxford?
Thermex typically offers a 2-year warranty on parts and labor. Some components like LED bulbs may have a shorter warranty. Always keep your purchase receipt.
Can I use the hood without ducting?
Yes, but only if you install a charcoal filter for recirculation. Without it, the hood will not filter odors. For best performance, ducted mode is recommended.
How do I clean the exterior of the hood?
Use a soft cloth dampened with mild soapy water. Avoid abrasive cleaners or solvents. For stainless steel models, use a dedicated stainless steel cleaner to avoid fingerprints.
User questions about Oxford Thermex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual Oxford - Thermex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Oxford by Thermex.
USER MANUAL Oxford Thermex
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Thermex
Model : Oxford
Category : Basket