PS-20 - Speaker Omnitronic - Free user manual and instructions
Find the device manual for free PS-20 Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Loudspeaker |
| Brand | Omnitronic |
| Model | PS-20 |
| Dimensions (W x H x D) | 305 x 210 x 185 mm |
| Weight | 3.2 kg |
| Power Handling (RMS) | 20 W |
| Power Handling (Peak) | 40 W |
| Impedance | 8 ohms |
| Frequency Response | 80 Hz - 20 kHz |
| Sensitivity (1W/1m) | 90 dB |
| Driver Size | 5.25" (133 mm) woofer, 1" tweeter |
| Enclosure Material | MDF with black vinyl finish |
| Grille | Detachable metal grille |
| Connector Type | Screw terminals |
| Mounting Options | Wall mount bracket (not included) |
| Recommended Amplifier Power | 20 - 50 W RMS |
| Main Functions | High-quality sound reproduction for monitoring or background music |
| Maintenance & Cleaning | Wipe with a dry, soft cloth. Avoid moisture and solvents. |
| Safety Precautions | Do not expose to rain or moisture. Provide adequate ventilation. Do not overload amplifier. |
| Spare Parts & Repairability | Replacement drivers, grilles, and terminals available from service centers. |
| General Information | Designed for use in indoor environments. Suitable for PA and studio applications. |
Frequently Asked Questions - PS-20 Omnitronic
How do I connect the Omnitronic PS-20 speaker to an amplifier?
Use speaker cables with bare wire or banana plugs. Connect the positive terminal of the amplifier to the red terminal of the speaker, and negative to black. Ensure the amplifier is turned off during connection.
What amplifier power is recommended for the PS-20?
An amplifier with 20 to 50 watts RMS per channel is recommended. Using an amplifier with higher power can damage the speaker if overdriven.
Can I use the PS-20 outdoors?
The PS-20 is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the speaker and void the warranty.
What is the impedance of the PS-20 speaker?
The impedance is 8 ohms. It can be connected in parallel with other 8-ohm speakers, but ensure the total load does not drop below the amplifier's minimum impedance rating.
How do I clean the PS-20 speaker?
Wipe the cabinet with a dry, soft cloth. Do not use water or cleaning agents. For the grille, gently vacuum or use a soft brush to remove dust.
Why is there no sound from my PS-20?
Check that the amplifier is powered on and the source is playing. Verify the speaker wires are securely connected to both the amplifier and speaker terminals. Test with another speaker to isolate the issue.
Can I mount the PS-20 on a wall?
Yes, the PS-20 has a mounting insert for wall brackets. Use a compatible wall mount (not included) and ensure it is securely attached to a stud. Do not exceed the maximum load capacity.
What is the frequency response of the PS-20?
The frequency response is 80 Hz to 20 kHz, providing full-range sound suitable for music and speech reproduction.
Are replacement parts available for the PS-20?
Yes, replacement drivers, grilles, and terminal cups can be ordered from authorized Omnitronic service centers. Contact local dealer for availability.
How do I protect the PS-20 from damage?
Avoid overloading the speaker by keeping the amplifier volume at reasonable levels. Do not place near heat sources or in direct sunlight. Use the speaker within its rated power range.
User questions about PS-20 Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual PS-20 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PS-20 by Omnitronic.
USER MANUAL PS-20 Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : PS-20
Category : Speaker