HL85 - Uncategorized Xantech - Free user manual and instructions
Find the device manual for free HL85 Xantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IR Emitter Block |
| Brand | Xantech |
| Model | HL85 |
| Color | Black |
| Dimensions (L x W x H) | 1.5 x 0.5 x 0.25 inches (38 x 13 x 6 mm) |
| Weight | 0.1 oz (2.8 g) |
| Cable Length | 3 ft (0.9 m) |
| Connector | 3.5 mm mono mini plug |
| IR Output | Single high-output IR LED |
| Operating Voltage | 5 - 12 VDC |
| Current Draw | 20 mA typical |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Compatibility | Xantech MRC-88, 791-44, and other IR distribution systems |
| Mounting | Self-adhesive pad or screw mount |
| Function | Emits IR signals from a control system to control A/V devices |
| Installation | Connect to IR output port of compatible controller, place emitter within line-of-sight of device IR sensor |
| Maintenance | Keep lens clean; wipe with dry cloth |
| Safety | Low voltage; no special safety precautions required |
| Spare Parts | Replacement emitters available; adhesive pads sold separately |
| Repair | Non-repairable; replace if defective |
| Warranty | 1 year limited warranty |
| Package Contents | 1x HL85 emitter, 1x adhesive pad, quick-start guide |
Frequently Asked Questions - HL85 Xantech
How do I install the HL85 IR emitter?
Connect the 3.5mm plug to an IR output port on your Xantech controller. Peel the adhesive backing and stick the emitter onto a surface such that the IR LED has a clear line-of-sight to the device you want to control. Ensure the emitter is within 10 feet (3 m) of the target device.
What voltage does the HL85 require?
The HL85 operates on 5 to 12 VDC supplied by the connected controller. It draws approximately 20 mA.
Can I use the HL85 with non-Xantech controllers?
The HL85 is designed for Xantech IR distribution systems using a standard 3.5mm mono plug. It may work with other controllers that output a similar IR signal, but compatibility is not guaranteed.
What is the typical range of the HL85 emitter?
The effective range is up to 15 feet (4.5 m) in optimal conditions, but we recommend placing it within 10 feet (3 m) for reliable operation.
How many HL85 emitters can I connect to one controller?
Most Xantech controllers support multiple emitters. The maximum depends on the controller's output current; typically up to 4-6 emitters can be connected in parallel.
What should I do if the emitter stops working?
Check the connection to the controller and ensure power is supplied. Try cleaning the IR LED lens with a soft cloth. If it still fails, the emitter may be defective and should be replaced.
Is the HL85 compatible with 12V IR systems?
Yes, it is compatible with 12V systems as it accepts 5-12 VDC input.
Can I mount the HL85 behind the controlled device?
The emitter must have a direct line-of-sight to the device's IR sensor. If you mount it behind the device, you need to ensure there is a clear path for the IR beam, such as through a vent or using a reflective surface.
Does the HL85 require any special configuration?
No configuration is needed. It is a passive device that simply emits the IR signal received from the controller.
Where can I find the user manual for the HL85?
The user manual is available for free download on notice-facile.com in PDF format. It includes installation instructions and technical specifications.
User questions about HL85 Xantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HL85 - Xantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HL85 by Xantech.
USER MANUAL HL85 Xantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Xantech
Model : HL85
Category : Uncategorized