Electribe-S mkII - DJ Equipment KORG - Free user manual and instructions
Find the device manual for free Electribe-S mkII KORG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sampling Groovebox / DJ Equipment |
| Brand | Korg |
| Model | Electribe-S mkII |
| Dimensions (WxDxH) | 285 x 213 x 65 mm |
| Weight | 1.1 kg |
| Power Supply | DC 9V (AC adapter included) |
| Sampling | 16-bit, 44.1 kHz, stereo |
| Polyphony | 16 voices |
| Sequencer | 16-part, up to 256 steps per pattern |
| Effects | 36 types including delay, reverb, filter, and master effects |
| Display | 2-line LCD with backlight |
| Memory | 128 patterns, 8 songs, 1,000 sample slots |
| Inputs | 2 audio inputs (L/R, 1/4" jack), 1 MIDI In |
| Outputs | 2 audio outputs (L/R, 1/4" jack), 1 headphone (1/4" jack), 1 MIDI Out |
| Storage | SmartMedia card slot (supports up to 128 MB) |
| Synthesis | PCM and virtual analog synthesis |
| Arpeggiator | Yes, with multiple modes |
| Included Accessories | AC adapter, 8 MB SmartMedia card, owner's manual |
| Maintenance | Clean with a soft dry cloth; avoid moisture and solvents |
| Safety | Use only the specified Korg AC adapter; do not open the unit |
| Repairability | Service by authorized Korg centers only |
Frequently Asked Questions - Electribe-S mkII KORG
How do I load samples onto the Electribe-S mkII?
Insert a SmartMedia card with WAV or AIFF files (16-bit, 44.1 kHz) into the slot. Press the Global button, navigate to 'Card Load', select the sample, and assign it to a pad.
Can I use the Electribe-S mkII as a MIDI controller?
Yes, it can send MIDI notes and control changes via the MIDI Out port. Set the part to 'MIDI' mode in the part parameters.
How do I save my patterns?
Press the Write button, select a destination pattern number, and confirm. Patterns are stored in internal memory; use a SmartMedia card for backup.
How do I reset the Electribe-S mkII to factory settings?
Hold down the Shift and Global buttons while powering on, then select 'Factory Reset' from the menu. All user data will be erased.
What effects are available?
There are 36 effects including delay, reverb, distortion, filter, chorus, flanger, and master effects like compressor and limiter.
Can I sync the Electribe-S mkII with other gear?
Yes, via MIDI clock. Set the Electribe to 'Slave' to receive clock from another device, or 'Master' to send clock. Connect MIDI cables accordingly.
How do I record audio into the Electribe-S mkII?
Connect an audio source to the inputs, select a pad in Sample mode, press Record, and play the source. Adjust threshold and gain before recording.
How do I connect the Electribe-S mkII to a computer?
Use a MIDI interface (USB to MIDI cable) connected to the MIDI In/Out ports. There is no USB port. For audio, connect the outputs to an audio interface.
What is the polyphony of the Electribe-S mkII?
It has 16 voices of polyphony, shared between synth parts and sample playback. You can layer up to 16 sounds simultaneously.
How do I update the firmware?
Download the latest firmware from Korg's website. Copy the .BIN file to a SmartMedia card, insert it, hold Shift+Global while powering on, and follow the prompts.
User questions about Electribe-S mkII KORG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your DJ Equipment in PDF format for free! Find your manual Electribe-S mkII - KORG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Electribe-S mkII by KORG.
USER MANUAL Electribe-S mkII KORG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KORG
Model : Electribe-S mkII
Category : DJ Equipment