CDPX-X-E2-W-15-EX2 - Monitor Festo - Free user manual and instructions
Find the device manual for free CDPX-X-E2-W-15-EX2 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Pressure Monitor |
| Model | CDPX-X-E2-W-15-EX2 |
| Brand | Festo |
| Dimensions (H x W x D) | 120 mm x 60 mm x 30 mm |
| Weight | 200 g |
| Power Supply | 24 V DC, 1 W |
| Display Type | Digital LED, 2-line |
| Pressure Range | 0 to 15 bar |
| Output Signal | PNP/NPN switching output, 4-20 mA analog |
| Protection Class | IP65 |
| Operating Temperature | 0 °C to 50 °C |
| Main Functions | Pressure monitoring, setpoint adjustment, hysteresis setting |
| Maintenance | Clean with dry cloth; check electrical connections periodically |
| Safety | Operate within specified voltage and pressure limits; avoid contact with fluids |
| Spare Parts | Not user-serviceable; contact Festo for repairs |
| General Information | Suitable for industrial automation; CE certified |
Frequently Asked Questions - CDPX-X-E2-W-15-EX2 Festo
How do I connect the CDPX-X-E2-W-15-EX2 monitor to my PLC?
Connect the output signal (PNP/NPN) to a digital input of your PLC. For analog reading, use the 4-20 mA output. Refer to the wiring diagram in the manual.
What is the maximum pressure this monitor can handle?
The pressure range is 0 to 15 bar. Do not exceed 20 bar overpressure to avoid damage.
How do I set the switching point?
Press the SET button to enter parameter mode. Use the arrow keys to adjust the switching point and hysteresis. Confirm with SET.
The display shows 'Err'. What does it mean?
'Err' indicates a sensor fault or overpressure. Check the pressure source and connections. If persistent, contact Festo support.
Can I use this monitor for liquids?
This monitor is designed for compressed air and neutral gases. For liquids, please consult Festo for appropriate models.
What is the power consumption?
The power consumption is approximately 1 W at 24 V DC. Use a regulated power supply.
How do I clean the monitor?
Wipe the housing with a dry, lint-free cloth. Do not use solvents or water for cleaning.
Is the monitor protected against water ingress?
Yes, it has an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets.
The output is not switching. What could be wrong?
Check the power supply and wiring. Ensure the pressure is within the set range. Verify the output configuration (PNP/NPN).
Where can I find the user manual?
The user manual is available for free download on the Festo website or on notice-facile.com. Search for model CDPX-X-E2-W-15-EX2.
User questions about CDPX-X-E2-W-15-EX2 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual CDPX-X-E2-W-15-EX2 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CDPX-X-E2-W-15-EX2 by Festo.
USER MANUAL CDPX-X-E2-W-15-EX2 Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : CDPX-X-E2-W-15-EX2
Category : Monitor