SFAB-200U-HQ10-2SA-M12 - Measuring equipment Festo - Free user manual and instructions
Find the device manual for free SFAB-200U-HQ10-2SA-M12 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Flow sensor for compressed air |
| Measuring Principle | Thermal |
| Measuring Range | 0.2 ... 200 l/min (air) |
| Accuracy | ±3% of measured value |
| Output Signal | 4-20 mA, switching output (PNP/NPN) |
| Electrical Connection | M12x1, 5-pin plug |
| Process Connection | G1/4 male |
| Operating Voltage | 24 V DC ±10% |
| Current Consumption | < 100 mA |
| Pressure Range | -0.95 ... 10 bar |
| Medium Temperature | -10 ... 70 °C |
| Ambient Temperature | -10 ... 60 °C |
| Protection Class | IP65 |
| Housing Material | Anodized aluminium |
| Weight | Approx. 150 g |
| Display | LED bar graph and numerical |
| Maintenance | No regular maintenance required; keep clean and dry |
| Safety Instructions | Observe voltage limits; do not exceed maximum pressure; use correct wiring |
| Spare Parts / Repairability | Device is non-repairable; replace if faulty |
| General Information | Designed for industrial environments; compatible with Festo accessories |
Frequently Asked Questions - SFAB-200U-HQ10-2SA-M12 Festo
What is the measuring range of the SFAB-200U-HQ10-2SA-M12?
The measuring range for air is 0.2 to 200 l/min.
What type of output signal does this sensor provide?
It provides both an analog 4-20 mA signal and a switching output (PNP or NPN, configurable).
What is the electrical connection type?
It uses an M12x1, 5-pin plug connector.
What is the process connection size?
The process connection is G1/4 male thread.
What power supply voltage is required?
The device operates on 24 V DC ±10%.
How do I install the flow sensor correctly?
Install in a straight pipe section with at least 10x pipe diameter upstream and 5x downstream. Ensure flow direction matches arrow on housing.
Can the sensor be used for liquids?
No, it is designed exclusively for compressed air and neutral gases.
How do I perform zero-point adjustment?
Ensure no flow, then press and hold the 'Zero' button (if available) or use the IO-Link interface (if equipped) for adjustment.
What is the maximum pressure allowed?
The maximum operating pressure is 10 bar.
How do I clean the sensor?
Clean the housing with a damp cloth. Do not use solvents or immerse the sensor. Keep the sensor dry.
User questions about SFAB-200U-HQ10-2SA-M12 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual SFAB-200U-HQ10-2SA-M12 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SFAB-200U-HQ10-2SA-M12 by Festo.
USER MANUAL SFAB-200U-HQ10-2SA-M12 Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : SFAB-200U-HQ10-2SA-M12
Category : Measuring equipment